| |
645Likes
-
02-02-2010 09:34 PM
#2061
Re: Abec 11 Updates
ive had a bunch of abec11 wheels, 9 sets probably, they dont do that usually.
-
-
02-02-2010 09:37 PM
#2062
Re: Abec 11 Updates
 Originally Posted by SpeedFiend
ive had a bunch of abec11 wheels, 9 sets probably, they dont do that usually.
ditto.
if the mad scientist releases harder duro classic thane zigs (81a) i'll be all over them. i like otangs because they slip easier than reflex but they wear so quick compared to reflex and other abec thane i've used.
the only time my wheels have chunked or cracked was during a slide and once when a buddy took my board off a curb and literally ground the wheel against the concrete tearing it apart.
TINKERING WITH YOUR SETUP IS HALF THE FUN OF BOARDING.
"If you are 'faking the funk', you are inherently NOT BONZING" - Big Dave and Austin of the Sunset Sliders and California Bonzing Co.
-
02-02-2010 10:16 PM
#2063
Re: Abec 11 Updates
any updates on when centrax will be released, also are there any plans to do another run of reflex grippens? i just got a used set and they are really nice
 Originally Posted by Nafertikus
Did I mention my Heelys top out at warp speed five?
 Originally Posted by whatsisname6
You'd be wiener cousins with Tiger Woods!
-
02-03-2010 11:02 AM
#2064
Re: Abec 11 Updates
my guess, 2 more months. maybe early spring if were lucky.
 Originally Posted by ChrisChaput
You are on drugs my friend.
Team Go Funk Yurself - 1 member and growing
-
02-03-2010 01:20 PM
#2065
Re: Abec 11 Updates
 Originally Posted by Randelpink03
my guess, 2 more months. maybe early spring if were lucky.
that wouldnt be to bad i guess, i just really want to get some 83mm wheels in reflex thane and dont really feel like paying upward of a hundred dollars for some reflys
 Originally Posted by Nafertikus
Did I mention my Heelys top out at warp speed five?
 Originally Posted by whatsisname6
You'd be wiener cousins with Tiger Woods!
-
02-03-2010 01:26 PM
#2066
Re: Abec 11 Updates
 Originally Posted by taz0001000
that wouldnt be to bad i guess, i just really want to get some 83mm wheels in reflex thane and dont really feel like paying upward of a hundred dollars for some reflys
do you think centrax are going to be much cheaper? i mean there's more thane than reflys in a similar size.
TINKERING WITH YOUR SETUP IS HALF THE FUN OF BOARDING.
"If you are 'faking the funk', you are inherently NOT BONZING" - Big Dave and Austin of the Sunset Sliders and California Bonzing Co.
-
02-03-2010 01:37 PM
#2067
Re: Abec 11 Updates
 Originally Posted by snozzboarder55
do you think centrax are going to be much cheaper? i mean there's more thane than reflys in a similar size. 
yes but even regular 97 flys cost under $100 the only reason reflys go for as much as they do is because they are so hard to find and if you were to get them straight from abec 11 somehow they would be really expensive because they dont make a lot of them, the price goes down a lot when they producing large quantity of them
 Originally Posted by Nafertikus
Did I mention my Heelys top out at warp speed five?
 Originally Posted by whatsisname6
You'd be wiener cousins with Tiger Woods!
-
02-03-2010 01:38 PM
#2068
Re: Abec 11 Updates
he said himself that 77mm was first and the 83mm was like a "momo light" and coming later on
what the heck do you want 83mm reflex thane when all of dh is drifting in the take a tight line and slide it out take on getting to the bottom first. i could see maybe if you weighed a lot, like double what i weigh but for most skaters on here, a 77mm centrax is gonna be something they, well, ya know
theres so many wheels out there to get it done on right now. plenty made by abec11, do you run 75mm pink bigzigz, from what ive observed most people do not, i like them cause they grip, you should try a set if you like grip
-
02-03-2010 01:42 PM
#2069
Re: Abec 11 Updates
 Originally Posted by SpeedFiend
he said himself that 77mm was first and the 83mm was like a "momo light" and coming later on
what the heck do you want 83mm reflex thane when all of dh is drifting in the take a tight line and slide it out take on getting to the bottom first. i could see maybe if you weighed a lot, like double what i weigh but for most skaters on here, a 77mm centrax is gonna be something they, well, ya know
theres so many wheels out there to get it done on right now. plenty made by abec11, do you run 75mm pink bigzigz, from what ive observed most people do not, i like them cause they grip, you should try a set if you like grip
i was going to put it on a dseed because from what i hear they are supper drifty and i was going to try and even it out
 Originally Posted by Nafertikus
Did I mention my Heelys top out at warp speed five?
 Originally Posted by whatsisname6
You'd be wiener cousins with Tiger Woods!
-
02-03-2010 01:49 PM
#2070
Re: Abec 11 Updates
 Originally Posted by taz0001000
i was going to put it on a dseed because from what i hear they are supper drifty and i was going to try and even it out
i hear a lot
-
02-03-2010 02:13 PM
#2071
Re: Abec 11 Updates
I paid the same price for classic big zigs as the reflex ones.... from sarah.
I have a bunch of skateboards
Isn't this what you're supposed to put in a signature?
-
02-03-2010 02:39 PM
#2072
Banned
Addicted Cruiser
- Rep Power
- 0
Re: Abec 11 Updates
I really like how the 75a flywheels slide, I thought it would be hard because they're so soft. It was smooth and effortless.
-
02-03-2010 02:43 PM
#2073
Re: Abec 11 Updates
 Originally Posted by Smurf
I really like how the 75a flywheels slide, I thought it would be hard because they're so soft. It was smooth and effortless.
it's because the large core and low thane depth gives softer urethane characteristics of harder wheels. that's why fly wheels over 81a are way drifty too drifty for most people.
TINKERING WITH YOUR SETUP IS HALF THE FUN OF BOARDING.
"If you are 'faking the funk', you are inherently NOT BONZING" - Big Dave and Austin of the Sunset Sliders and California Bonzing Co.
-
02-03-2010 04:23 PM
#2074
Banned
Addicted Cruiser
- Rep Power
- 0
Re: Abec 11 Updates
 Originally Posted by snozzboarder55
it's because the large core and low thane depth gives softer urethane characteristics of harder wheels. that's why fly wheels over 81a are way drifty too drifty for most people.
Thats sick! I wish I had a set of 78a's they'd be a ton of fun.
-
02-03-2010 04:48 PM
#2075
Re: Abec 11 Updates
 Originally Posted by taz0001000
any updates on when centrax will be released, also are there any plans to do another run of reflex grippens? i just got a used set and they are really nice
Nice to see someone is enjoying them.
Quote:
Originally Posted by BigTreeFallHard
When do the next round of audtidions take place for "So you think you can troll..." ?
Quote:
Originally Posted by humbi
is Tyler Hill going to be a judge on the next round?
Quote:
Originally Posted by Ian
Tyler wins silverfish
Quote:
Originally Posted by Slap Da Troll
This thread is worthless until TylerHill posts.
Quote:
Originally Posted by braineaters
This Tyler kid is a bitch
-
02-03-2010 05:54 PM
#2076
Re: Abec 11 Updates
 Originally Posted by SpeedFiend
....what the heck do you want 83mm reflex thane
I'd want 83mm reFlys for push races.
-
02-03-2010 06:35 PM
#2077
Re: Abec 11 Updates
 Originally Posted by SpeedFiend
he said himself that 77mm was first and the 83mm was like a "momo light" and coming later on
what the heck do you want 83mm reflex thane when all of dh is drifting in the take a tight line and slide it out take on getting to the bottom first. i could see maybe if you weighed a lot, like double what i weigh but for most skaters on here, a 77mm centrax is gonna be something they, well, ya know
theres so many wheels out there to get it done on right now. plenty made by abec11, do you run 75mm pink bigzigz, from what ive observed most people do not, i like them cause they grip, you should try a set if you like grip
A 77a 83mm reflex flywheel would make for a nice long distance wheel imo
Killswitch Mini Drop Through 9/10 condition, $128+12 bucks shipping. PM ME
Seismic Blastwaves: 38 bucks, 9/10 condition. Otang Stims, 28 bucks, 8/10 condition. PM ME
Aerothrust/Speedmaster/Icaro 4-Fight/Vector M-4 Visors for Sale, 14 bucks PM ME
Full Ceramic Bearings PM ME
-
02-05-2010 05:50 PM
#2078
Re: Abec 11 Updates
Thankyou Sara,
Just got my regrippins today, now all I need are baseplates and bearings.
Peace
Todd
holios@comcast.net
Quote Tarren(my son). "If we didn't have taste buds, I could eat anything, even healthy stuff like vegetables."
-
02-05-2010 08:51 PM
#2079
Re: Abec 11 Updates
gah so jealous! i want some of those things so badly
-
02-05-2010 08:55 PM
#2080
Re: Abec 11 Updates
My regrippins are in the mail.
TEAM BROCE
DBDH
Cubing <3
-Keban
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks