post your latest purchase

[Reece Man]

None what so ever, if your referring to how comfortable your leathers will be. Neither will hard knee pads, or soft elbow pads. If you measured right, your NJKs should be TIGHT when you first get them, so much it might be uncomfortable, or difficult to tuck/get into a drop knee position. After wearing them for awhile they will break in and everything will feel more normal.

What's the point of the back pad then?

[PurrCrabs]

170mm hangers
40* baseplate
10mm axles
flippable hanger
no spherical

there like stupid low on a drop-through haha I just put them on my friends hellcat, and its like the lowest drop-through ever!
The trucks look heavy, but they are a lot lighter than i expected and i compared the weight to some fast track 180's and you can feel the difference in the santoro's being lighter. I havnt gotten a good chance to take them up to speed or anything yet, but they feel very solid and quality made!

Sounds pretty sweet man, nice choice then.

[SlyTX]

What's the point of the back pad then?

Its soft and is a cushion to your vertebrae, just as your soft knee pads are to your knees...combined with an under leather, strapped on back protector could prevent some pretty serious spinal injuries. You would be like a turtle.

I dont think enough downhill skaters consider how vulnerable and exposed your spine is, especially in an impact with a car or guardrail going into the spine.

[krow]

Sounds pretty sweet man, nice choice then.

thanks, im stoked to try them tomorrow.

[flannelman]

some 187 pro kneepads, and all of MHM's silver kingpin nuts

and some more wood glue. mmm something is in the press... yum! all my finishing supplies are sitting just waiting to make that cat purr down my street.

pressing the a new deck is like puting cookies in the oven, they smell great, but you can eat them right away. they have to cool first, then be drowned in milk. the waiting game sucks.

[con_tach]

some dye for my wheels

[AfroRider21]

some dye for my wheels

haha i've been waiting for someone to do that

[METALSHARK]

Dude, those trux are so metal!

[atomicturtle462]

Does that deck have an open end?

[mark33]

got myself these

[mark33]

to go with this...got this lot last month but have only just managed to figure out how to post BIG photos..so thought id show it all off again

[mark33]

may as well throw these up aswell...lots of carbon goodness

[mark33]

heres the super record 11 chain i got aswell with the groupset

[Terrorsathan]

dyed wheels look so lame to me, I've yet to see a set dyed just right.

Those carbon bike wheels.. do they have tires or?

[goldfishofhate]

picked up a set of fastracks for my screaming mary coming in next week. also finally pulled the trigger on a widerglider complete

[mark33]

dyed wheels look so lame to me, I've yet to see a set dyed just right.

Those carbon bike wheels.. do they have tires or?

yeah tubes and tyres with loooong valves on the tubes

[mark33]

ok some skate stuff
2 sets of these

2 sets of these

2 sets of these

2 sets of these

2 sets of these

2 sets of these

plus a bunch of bearings and spacers and hardware oh and a pair of loaded slide gloves because some wanker stole mine from the bench i was sitting on

[Terrorsathan]

ok some skate stuff
2 sets of these

2 sets of these

2 sets of these

2 sets of these

2 sets of these

2 sets of these

plus a bunch of bearings and spacers and hardware oh and a pair of loaded slide gloves because some wanker stole mine from the bench i was sitting on

didn't like the new yellow otangs?

[mark33]

"didn't like the new yellow otangs?"

im in spain mate...we dont have any here yet,,,i bought these from shops not over the net.

[Terrorsathan]

I wasn't trying to be offensive, just wonder. And yes, you being in Spain has something to do with it!