post your latest purchase

**sk8brdngroxx** · 11-12-2009 04:51 PM

Originally Posted by dozer jr

give the guy a break, almost everyone starts on a s9.

not true i started on a landy

**Cheers** · 11-12-2009 04:52 PM

Originally Posted by dozer jr

give the guy a break, almost everyone starts on a s9.

i started on a rayne!

**DreadFred** · 11-12-2009 04:55 PM

Originally Posted by Largeboarder

Once again, a S9

hey guy, i could have gotten a Krown, but this was for $60 off CL.

**phil7153** · 11-12-2009 05:02 PM

Originally Posted by Cheers

i started on a rayne!

i started on a landy, which im my opinion is far worse than a sector 9

**dozer jr** · 11-12-2009 05:02 PM

i didnt say everyone, i said almost everyone.

**boarderaholic** · 11-12-2009 05:04 PM

Originally Posted by Largeboarder

Once again, a S9

What's your point?

**phil7153** · 11-12-2009 05:06 PM

Originally Posted by boarderaholic

What's your point?

he was trying to imply that sector 9's are crap. When most of them are fairly decent boards.

**atomicturtle462** · 11-12-2009 05:29 PM

Originally Posted by dozer jr

give the guy a break, almost everyone starts on a s9.

I started on my brothers, but soon after ordered an FSM.

**xjason11x** · 11-12-2009 05:43 PM

Got my venom and relfexes today! I think i got them a bitt too soft... but I'll try the 83a's on top later. Now i just need to get a ####### truck that will fit them properly! My crail seat is too small for relfexes or venoms on top, and can only fit Venoms on bottom

........ I'm about to give up on cast trucks.... they just seem to hate me.

**SaintSAW** · 11-12-2009 05:44 PM

Rayne Nemesis
75 mm 78a Abec 11 Gumballs
180 mm 50 degree Randals
90a Barrel Venom Bushings boardside, stock bushings roadside
Rush Abec 9 Bearings

**dozer jr** · 11-12-2009 05:45 PM

starting to get christmas presents now

first off the list: isis, new rayne blood shirt.

**jman1365** · 11-12-2009 05:45 PM

Originally Posted by xjason11x

Got my venom and relfexes today! I think i got them a bitt too soft... but I'll try the 83a's on top later. Now i just need to get a ####### truck that will fit them properly! My crail seat is too small for relfexes or venoms on top, and can only fit Venoms on bottom

........ I'm about to give up on cast trucks.... they just seem to hate me.

apparently they only hate you
reflexes and venoms both fit in my two sets of crails

**Petary791** · 11-12-2009 05:47 PM

some of deez

and some of deez

**RodRod** · 11-12-2009 05:48 PM

high tops FTW!!!!
hows the board feel?

**xjason11x** · 11-12-2009 05:54 PM

Originally Posted by jman1365

apparently they only hate you
reflexes and venoms both fit in my two sets of crails

What? Did you shave some off or something? I flipped the board up, and pushed it as if it were turning, and part of my bushing would just 'ooze out of the bushing seat and onto the surrounding metal.

**jman1365** · 11-12-2009 05:58 PM

Originally Posted by xjason11x

What? Did you shave some off or something? I flipped the board up, and pushed it as if it were turning, and part of my bushing would just 'ooze out of the bushing seat and onto the surrounding metal.

nope, didn't do anything to them
how tight are your trucks?

**Petary791** · 11-12-2009 05:59 PM

Originally Posted by RodRod

high tops FTW!!!!
hows the board feel?

Not sure yet, they're not here. But it's probably terrible, that's the plan at least.

**xjason11x** · 11-12-2009 06:00 PM

Originally Posted by jman1365

nope, didn't do anything to them
how tight are your trucks?

failry tight. I was noyl able to try it with 81a and 83a bottom. That worked well..... until I bit.

Now it's gonna be 83a top and 85a bottom. I'll try loosening them up some more, but then there's the evil wheel bite again.

**RodRod** · 11-12-2009 06:01 PM

Originally Posted by Petary791

Not sure yet, they're not here. But it's probably terrible, that's the plan at least.

thats the plan?
the sole seams stupid thick...typical for old school adidas lol look sick though

**jman1365** · 11-12-2009 06:04 PM

Originally Posted by xjason11x

failry tight. I was noyl able to try it with 81a and 83a bottom. That worked well..... until I bit.

Now it's gonna be 83a top and 85a bottom. I'll try loosening them up some more, but then there's the evil wheel bite again.

what board and wheels?
my two setups are
avenger, crails, lemon/lime combo, 70mm wheels
avenger, crails, orange/pink combo, 72 mm wheels
3 inch kingpins with the nut almost flush with the end of the kingpin
no wheelbite