Mold going together

[dcphotos]

I pulled the blank out the bag last night and cut out part of the tail shape. I didn't too much else as I didn't want to wake the neighbors with the saw.
Pictured here is the blank and the board I am currently riding which was cut from a blank I ordered from Eastbilt:

My old SMA Natas is in there also, it was traced for the tail area.
Tonight is Friday, so I probably won't have any time to myself again until Monday. So more pics will come next week. I have some graphics designed and I ordered water-transfer decal paper in 11"x17" sheets that I'll use to apply them.

[Directive0]

looking good man !!!

[dcphotos]

One more thing, hey Ted if you're reading this I'd to get a Roarockit sticker to slap on my deck before I tape it. I could print one myself if I can get your logo or something(vector preferred). I know it will be good advertising for you, with my other board I get asked where I got it and where I got the blank and all every time I go skating.

[Ted]

One more thing, hey Ted if you're reading this I'd to get a Roarockit sticker to slap on my deck before I tape it. I could print one myself if I can get your logo or something(vector preferred). I know it will be good advertising for you, with my other board I get asked where I got it and where I got the blank and all every time I go skating.

No problem on this one. Do you want the concrete moon or the strait ROAROCKIT logo?

Ted

[I hate Cops.]

ii think im going to make a foam mold for my next board.

[dcphotos]

Hey Ted, if you have those in vector just send them both. I'll stick one in my bottom graphics and make a sticker for the top. My email is dcphotography@gmail.com. If they are raster files send them anyway and I'll see what I can do.

[dcphotos]

I got my shape cut out yesterday, but due to a huge storm had to inside and save the edge routing and hole drilling for tonight.

The deck on the right is what I am riding now. They are both 10"x32", and as the new one has a flat nose the wheelbase will be a good bit longer.

I used 7 plys, but the board is uite a bit thicker than the norm. It seems as though it might be a little on the heavy side also.

[dcphotos]

I got it routed and drilled at lunch. A little more sanding and it will be ready for a coat of paint. It's going to be white with graphics I am putting together on the bottom. The tope will be painted over with glow-in-the-dark paint and stickered up, then covered with clear tape.
So far these are the graphics:

My own rip-off on SMA with my housecat.