Wood suppliers

[Charchar]

Does anyone know any suppliers in North California??

[mehbear!]

NC builders, The Hardwood Store of North Carolina

they sell 1/8" baltic birch, but it's really close to 1/16" since most wood sizes run down. i got 2 5x5 sheets for 50 bucks. they also sell exotic veneer. i bet i could get them to order some maple in thinner sizes.

[VampMN]

One for the Charlotte, NC folks. Wurth Wood Group. I got 2 sheets of 5'x5' 1/8" baltic birch for less than $30. They are also super helpful, and very, very nice. They are also the only place I have found in the area that sells baltic birch in skateboard sizes.

[mehbear!]

One for the Charlotte, NC folks. Wurth Wood Group. I got 2 sheets of 5'x5' 1/8" baltic birch for less than $30. They are also super helpful, and very, very nice. They are also the only place I have found in the area that sells baltic birch in skateboard sizes.

nice. i'll have to check that out too. only an hour or so away. are you sure it wasn't plywood? it seems really cheap

[Everett McCord]

NC builders, The Hardwood Store of North Carolina

they sell 1/8" baltic birch, but it's really close to 1/16" since most wood sizes run down. i got 2 5x5 sheets for 50 bucks. they also sell exotic veneer. i bet i could get them to order some maple in thinner sizes.

2 5x5 for 50

sorry but there is a much less expensive option in Raleigh that has really good wood.

CAPITOL CITY LUMBER

With a membership (which is free) I get 2 sheets for 35...

[VampMN]

nice. i'll have to check that out too. only an hour or so away. are you sure it wasn't plywood? it seems really cheap

I thought all the bb that's out there in sheets was plywood. But if you mean am I sure it's baltic and not regular, then yes, I'm sure.

[riebs]

Since the southern portion of VA hasn't been represented yet:

Yukon Lumber Co.
520 West 22nd Sreet
Norfolk, VA 23517
Welcome to YUKON LUMBER COMPANY

They offer a 5x5 of 1/8" BB for $22.30. If anyone knows of a cheaper source, I'd love to hear it.

[riebs]

I'll also go ahead and post the address of a free wood supplier for the HR area.

Fleet Imports
4016 Seaboard Court
Portsmouth, VA 23701
(757)465-9720

It's not wood that you'd use to make boards, but it can be used for a ton of other things (i.e: presses and racks!)

There are even 12" threaded rods (complete w/ nuts and washers) for the taking. Constant updated supply of scrap wood.

Average dimensions: 4"x4"x60"

[FaceVsAsphalt]

stop spamming we can read the first post. No need to post it so many times.

[cabbageboy]

PlanXsk8project@gmail.com

I will stock and ship All Baltic Birch sizes and thicknesses available with the best in the USA
My prices are Broker Direct to all longboard enthusiasts and makers
You Tube Channel PlanXsk8project

OllieMatix.com

Hello.

I am quite new on this forum, but I know that posting like this will get you banned. (you have already been reported in the ban-hammer tread)
Posting like this will not make people wanna buy from you. (not me atleast)

just my experience browsing this forum

[riebs]

stop spamming we can read the first post. No need to post it so many times.

My apologies? I not sure how I was spamming?

[mehbear!]

My apologies? I not sure how I was spamming?

He wasn't referring to you. He was referring to an actual spammer. His account was deleted so you cannot see the post that he was referring to. Check the quote in cabbageboy's post and you'll see.

[R&R Boarding Co]

somebody needs to consolidate all the "where to get wood" threads and organize the companies by country/state and make it a sticky.

[Dog Town jr]

Hey I'm new to board building...looking for a wood supply (birch and maple 1/8') in the Phoenix area?

[irate_pirate]

If anyone in Adams County, Colorado needs to find anything, Paxton Lumber in Commerce City has always had some 1/8 in. thick 5' x 5' sheets of nice Baltic.

[curet]

Anyone in South Florida having any luck? The online shipping prices are unbearable.

[Drang Longboards]

Does anyone know of a good supplier in Utah?

[FishTown]

[funkmaster]

for anyone in california
J.E. Higgens Lumber Company
has a huge selection
and have a bunch of locations


Higgins Hardwoods

[ErikB91]

Skatepaige.com
9.5" by 35" maple veneers.