figure it out yourself. theres a million ways, but if you cant think something up, you're too stupid, and probably going to screw up someone's carefully worded instructions.
here's a list of things i might try, if i was to do this, in order from cheapest to most expensive/hard to find. i just made all these up in about 10 seconds, and im completely flabbergasted why you are asking a dumbass question like this.
chewing gum
duct tape
zip ties
shoe goo
pipe clamps
gooey black sealant
an actual air valve that has a threaded base that you put rubber washers on and screw the nut down and it clamps itself onto the bag. durr.
__________________
Victoria Longboard Crew
vlc.theboardmeeting.net
figure it out yourself. theres a million ways, but if you cant think something up, you're too stupid, and probably going to screw up someone's carefully worded instructions.
here's a list of things i might try, if i was to do this, in order from cheapest to most expensive/hard to find. i just made all these up in about 10 seconds, and im completely flabbergasted why you are asking a dumbass question like this.
chewing gum
duct tape
zip ties
shoe goo
pipe clamps
gooey black sealant
an actual air valve that has a threaded base that you put rubber washers on and screw the nut down and it clamps itself onto the bag. durr.
hey you dont have to be an asshole aight. im just askin a question, and if you thought it was dumb then dont reply to it. and by the way all your suggestions suck monkey balls.
that was a little unneccery, but you need to do a bit of searching (the forums and or internet) for yourself or at least stick to one thread, theres three treads by you all on the front page of the board building section asking questions on the same topic.
figure it out yourself. theres a million ways, but if you cant think something up, you're too stupid, and probably going to screw up someone's carefully worded instructions.
yeah, but im trying to put the valve that connects to a hand pump on the bag.
You would first have to convert the pump to make a vacuum make a manual vacuum pump for under $20 by converting a bicycle pump shows you how to do that. Then you could get a schrauder (spelling is incorrect but it is used on cars)valve and fuse, clamp, screw, or something.
I've been researching this for a while and plan on doing it that way when I have the time/money.
You would first have to convert the pump to make a vacuum make a manual vacuum pump for under $20 by converting a bicycle pump shows you how to do that. Then you could get a schrauder (spelling is incorrect but it is used on cars)valve and fuse, clamp, screw, or something.
I've been researching this for a while and plan on doing it that way when I have the time/money.
you can just use a vacu vin wine pump like they use on the roarockit thin air press bags, it even comes with a one way valve to hook up to the bag and olny costs like $10
thats what i plan to do but i dont know how to make the hole in the bag where my valve is gonna air tight, it keeps leeking. Should i try silicone? or what?
Attaching Valve on Homemade Vac Bag
