How loose are your trucks?

[rafaplaysguitar]

At one point, my trucks were so loose that I had to toghten the kingpin with my fingers every so often.

I ride a Vanguard with randals.

[rafaplaysguitar]

Edit:sorry, double post

[Blix]

At one point, my trucks were so loose that I had to toghten the kingpin with my fingers every so often.

I ride a Vanguard with randals.

Your bushings is too hard then, go softer.


I like mine loose but with no sloppyness.

[phil7153]

Your bushings is too hard then, go softer.


I like mine loose but with no sloppyness.

mmmm sloppy joes

[Jsquanls]

yea id recommend geting soft bushing before you decide to loosen up so much your washers rattle. soft bushings and a bit tighter trucks is a lot better than hard bushings and loose trucks

[Khonsu]

Because the roads around be have a lot of tar patches that slow down my pumping I keep my trucks loooooooossseeeeeee!

[TotsO'Thrash]

on a scale of 1 to 10
1 being your mom(loose) 10 being a 3-year-old(tight)
about a six

[TotsO'Thrash]

this loose

http://www.silverfishlongboarding.co...2&d=1192043535

ahhh!!!
see no evil!!!!!!!

[Ol'star9]

How good are the stock bushings on Gullwing chargers?
I have the stock, but im thinking of upgrading so i can at least try to pump.
For the record, i have a drop through star 9 by sector 9. (I know secrot 9 isnt the best compants, but the board has held up nicely.)

[pennypusher]

just a tad tighter then Matt Rodriguez

[igotscars]

Loose, but not stupid loose.

[Looptail]

My "go to" board is:
Stupid loose and highly wedged (front);
Cranked down fairly tight and reasonably de-wedged (rear).

My other boards (ramp etc.) are obviously set up totally different.

[skubasteve]

loose with medium bushings

[Chainmaillekid]

My turning radius is 8'.

When I upgrade my trucks it will probably be smaller.

[DontPushMongo]

i think mine are tooooo loose.

and idk how to tighten. i feel noob lol.

[Aiyo]

All my trucks are as tight as stock randals. Thats how they should be IMO. If you want a looser feeling, get softer bushings.

[KAKA]

ahhh when i have them dh i crank them right down onto my black randal comp11's so they are STIIIIIIIF
and when i freeride i let them out real loose without changing the bushings so the trucks kinda slop, which i like the feel of

my trucks are such whores

[KAKA]

i think mine are tooooo loose.

and idk how to tighten. i feel noob lol.

oh no
please don't tell me ur another noob with ceramics

[d-dub]

just snug enough to keep the hanger in place. 70 mph and up, one turn tighter. below that it stays the same.

[DontPushMongo]

oh no
please don't tell me ur another noob with ceramics

ceramics are ftmfw. thank you very much.