Your Cruising/Carving Setup

**That Guy** · 11-02-2009 08:46 PM

Originally Posted by frankie18

Me too! 8) Except ive got wedged bennetts 6.0s in the front, and dewedged tracker RTS 149s in the back. Im using Zigs, i love 'em. Love the grip on them (80a), and slide easy... Nomnomnom. Totally sick board though! I love it!

What color's yours? I got a green/yellow swirly one...so stoked!

You got the swirly!? Thats dope. With limes? I bet that boards as pretty as it is awesome.

Mine is in the mail as of now. I'm really hoping on either the yellow one, or one of the combo red/orange red/yellows.

Hows the bite with the bennett front/what bushings you running? Thats the only thing im worried about.

**frankie18** · 11-03-2009 07:52 AM

Yeah, i got swirly #2!

Haha it is! I almost got the green/yellow trackers, or 2 yellow zigs/2 lime zigs, but thought that was overkill.

That sucks! Mine came yesterday and it was all i could bare waiting for the UPS guy. I hugged him lol. Its worth the wait though.

Bite? Im running my bennetts with a 80a reflex barrell on top (boardside), and a tracker stepped busing roadside. Ive also used a lemon reflex short cone with good results. But with a 1/2" angeled riser super loose bennetts, the sally didnt bite (for my 130 lbs). And when i added a 1/4" hard riser to promote pumpiness, bite is all but obliterated.

**Drifty420** · 11-04-2009 02:57 PM

well.. i use this board for carving, small bombing, cruising, dancing, sliding etc etc. its just fun all around.

comet fsm 40"
otang yellow durians 86a 75mm
randal pink 180s 50* bps
and some bones bearings
venom 81a barrels road side, venom 85a barrels boardside. very carvy.. very lively.. very fun... but i bailed hard going down a hill today. so i think i might need to make some adjustments for a little more stability without the lose of liveliness, feel free to make suggestions/comments

**ScottyJ** · 11-09-2009 08:01 AM

I have my Evo w/852's in the tall setting, and I do it all with this setup.

**2up2down** · 11-09-2009 03:51 PM

- fibreflex 38" pintail
- paris 180mm
-70mm lime zig zags
- rush abec 5 bearings

i just bought this set up and i love it for cruising, carving, and it is pretty stable for bombing.

**RothToAnExtent** · 11-09-2009 06:35 PM

Dingy with round lipped nineballs. Otherwise I use my DH deck for just about everything ridingwise.

**loug** · 11-09-2009 06:53 PM

scimi 46", randal 180s, randal yellow bushings front, gray rear, grapeyapes with reds. put thin risers and soft washers on tonight and cleaned up the stubs on the hangers. be out early tomorrow. was worried about skating without the risers and soft washers because of a few horror stories about "cracks".

**ZuMBLe** · 11-10-2009 11:27 AM

Loaded Pintail Flex 3
Randal 150s
Venom Yellow Elim and Blue Barrels
Bones Reds
EW Smokers

**Petary791** · 11-10-2009 11:34 AM

Originally Posted by RothToAnExtent

Dingy with round lipped nineballs. Otherwise I use my DH deck for just about everything ridingwise.

I'm totally with you there. Lately I've only been riding my Ladera Purple Heart on 78A OJs and Bennett 4.3s, otherwise I'm riding my Madrid.

**gottliver** · 11-10-2009 01:14 PM

black label hensley popsicle
indy 149
bones yellow bushings
redz
rainskate tsunamie 62x85

on a quest to ollie. not gonna ride anything else until i nail it. its fun attacking the streets of brooklyn on this setup with a carving style. goal is to flow into ollies from sick surfy carves...

**jabobstro** · 11-10-2009 01:42 PM

landy switch,my everything setup.

**sparky88** · 11-15-2009 07:51 PM

just put in an order for:
loaded pintail flex 3
bennett 6.0s
MHS bearings
cult gamma rays 72 mm 80a

**skaboss** · 11-16-2009 03:58 PM

landyachtz big gun
bones reds
bear grizzleys
pumpkin bushings
lime big zigs

**astroidninja** · 11-25-2009 10:40 AM

vision street wear deck half inch spacers gull wing chargers and 69mm somethings or a bomb hills not countries deck

**Havok** · 12-25-2009 03:24 PM

Gravity Mini Crave
Parris 150mm Trucks with 1/8th Riser
ABEC 7 Bearings
Gravity Drifter Wheels, 70mm 80a

Just got it in today and it already carves pretty well. Board isn't too heavy. The board dosen't have much flex but it feels pretty nice under me, 6' 1" 133 lbs ha. Can't wait to really break it in when the weather gets better, snow in Texas.. Rides pretty smooth. Love the setup and the price.

**Say What** · 12-25-2009 03:30 PM

My only board, but:

Loaded Devish
Randal 180
White Khiros - Cone / Barrel
Gravity Drifters - 70mm 74a

Love it for carving and bombing the local hills, but I'm pretty sure I'll never be able to slide on these wheels, and the board is really squirrley when I'm pushing ( anyone have any ideas about this? ).

**VBoards** · 12-25-2009 05:24 PM

I just got the Derringer and the apex 37!!! they are both superrr strait!!

Derringer 28
S6's
Red ZigZag's 70mm 78a

Apex 37
S8's
Lime Freerides 72mm

I'm SOOOOOO stoked!

**Swifty** · 12-25-2009 06:44 PM

Originally Posted by VBoards

I just got the Derringer and the apex 37!!! they are both superrr strait!!

Derringer 28
S6's
Red ZigZag's 70mm 78a

Apex 37
S8's
Lime Freerides 72mm

I'm SOOOOOO stoked!

Awesome. Let me know how the freerides are on an Apex 37. Thats the exact wheel I was planning on using once I get an Apex 37.

**VBoards** · 12-27-2009 08:36 PM

I don't have the freerides on there anymore. I just didn't like the feel of the freerides so i put some 76mm gumballs on the apex and the freerides are now on my custom 44 which is perfect to me.

**bammaboo** · 01-03-2010 02:52 PM

haleiwa with flashbacks and gullwing sidewinders. i previously had some 69mm sector 9 wheels but changed them (for the better) and got some angled risers. still thinking about whether or not i should put my s8 originial trucks on the board. i'm starting to like my setup.