Post your Freeride/ Slopestyle setups

[stringtheory]

Hard to say for sure without riding it, you know. But, my initial thought is that 10mm extensions would help. But also remember, Randal 180mm are not a true 180mm. They are slightly less wide. I would check the Surf Rodz thread, because I know Blix measured them and their true measurement is in there.

[schmete]

then I put the RII's with 50 degree plates on my 'glider with powerballs... way more fun that I thought it would be... I don't know why everyone says Indys are the only way to go on this deck other than how low they are.

I run RIIs on my Superglider and it's a lot of fun. For the longest time I rode it with a 90a Venom barrel bottom and a 78a eliminator top. It had great carve and I never got wheelbite with the BigZigs I rode on it. RIIs all the way, holmes.

[jabobstro]

couldn't get ant pictures any pics at the moment but a landy switch,grizzlys flipped,eliminator and barrel,durians

[Metalhead8290]

[snozzboarder55]

on 42s? looks like a lot of fun! ive been eyeballing the drop speed for a while

[JY Jelly]

They are on 50s

[schmete]

Drop Speed
Paris trucks
Red Krypto race cores?
Looks like fun.

[Racer128]

As low as you'll ever see a board w/ 83mm wheels, that is except an fsm

corrected for ya :P

[Metalhead8290]

Thanks

and yes 50* randal plates paris hangers.

[Racer128]

no way will that bite. indys set the wheels out further than reverse kingpin trucks increasing the actual wheelbase (wheel to wheel) by an inch or so. if you don't bite with randals/paris/etc you won't bite with indys, unless you really really try to.

true, and to add to that, the turn of the trucks is diff, if u look closely. reverse kingpins end up going up,back, and in (toward the deck) while indys are more just up and back. its hard to explain, but i think most will know what im talking abt.

[schmete]

Thanks

and yes 50* randal plates paris hangers.

Yeah, I couldn't tell if those were Paris plates or not. What bushings are you running?

[Metalhead8290]

rihght now i have an 80a reflex jimz bottom bottom and an 85a venom barrell top. Still turns well for slides and cruising but with a little more cushion for speed.

[ConnorH]

Subsonic Barrage 40inch (drop speed is in retirement for now)
randals
76mm 81a flys/ 60mm or less flashbacks/ coned otangs

[schmete]

rihght now i have an 80a reflex jimz bottom bottom and an 85a venom barrell top. Still turns well for slides and cruising but with a little more cushion for speed.

Reflex JimZ? Like a stim shape Reflex?

[DPerjar]

That is in fact a Rayne dropspeed.

[JKid]

08 dervish redrilled for narrower wheelbase
paris 180
coneddddd lime bigzigz
rush abec 7s

soon to be chopped(tomorrows project). i cracked the tail

[Metalhead8290]

Reflex JimZ? Like a stim shape Reflex?

yup. made by KARROT

[Shavarsh]

what is the cheapest(used) freeride deck? I have been searching the classifieds, but I need something REALLY CHEAP!! I want it to be drifty, will be setup w/ paris 180/50s and durians. It also has to be symmetrical and preferably dropped or drop through

[Racer128]

what is the cheapest(used) freeride deck? I have been searching the classifieds, but I need something REALLY CHEAP!! I want it to be drifty, will be setup w/ paris 180/50s and durians. It also has to be symmetrical and preferably dropped or drop through

longboardskater usually has some good stuff for sale. idk how cheap you need though...

edit: longbaordsktaer and milehigh both have madrid the dream for really cheap.

[Shavarsh]

this is gonna sound stupid, but I need it to be under 30 thats why I have an abused deck add