Post your Freeride/ Slopestyle setups

[loserplayer]

or you lathe it...

[LawlessPat]

or you lathe it...

truth... I need to get one of those...

[d-dub]

[wooden]

slippery, low goodness.
dropped indy hybrids, purple sabre bottom, yellow elim top
flashbacks (would be some blue kryptos but i need 8mm spacers)

[jessse]

slippery, low goodness.
dropped indy hybrids, purple sabre bottom, yellow elim top
flashbacks (would be some blue kryptos but i need 8mm spacers)

Iv used that exxact setup, its fantastic!!!

[ChefGeoff]

Topmount FSM on 215 hybrids and Fly's gripped with edger/mud

[Eminentus]

Old Asym, Crails and worn down Powerballs.

[wardlarson]

i went from dropped randals to dropped indys and realized all you dudes on indys are cheating

you can barely lean without throwing a gnarly standup slide hahaha.

[SeanML]

i went from dropped randals to dropped indys and realized all you dudes on indys are cheating

you can barely lean without throwing a gnarly standup slide hahaha.

I might just have to try my Indys on the Thresher then... I suppose they'll probably slip out easier than the precisions I've got on there now

[[(Erik)]]

Old Asym, Crails and worn down Powerballs.

is that blix's old asym?

[elvk-]

i went from dropped randals to dropped indys and realized all you dudes on indys are cheating

you can barely lean without throwing a gnarly standup slide hahaha.

hahahah i know man! it is like cheating, im so glad im a cheater now too. my standies have progressed soo much since ive switch from 50* randals to 215 hybrids.

fsm - 215 indy hybrids - mangotangs is my set up. it can definetly cut cookies, but it is the most fun set up i've ever ridden. ridiculously slidey.

[ChefGeoff]

drop through hybrids and FSM rocker gave me some pretty nasty railbite even when my fly's were the full 83mm. it was fun drop through, but now that i topmounted it i'm really diggin the extra leverage and room to grab rail i've gained while the indy's are keepin it relatively low and super slidey

guess i should've gone with a flush FSM

[Eminentus]

is that blix's old asym?

Yes.

10itsminenows!

[poparotc]

been liking this freeride set up

[jeffrey]

been liking this freeride set up

flatter than a 10 yr. old

[poparotc]

not where it matters

[wooden]

drop through hybrids and FSM rocker gave me some pretty nasty railbite even when my fly's were the full 83mm. it was fun drop through, but now that i topmounted it i'm really diggin the extra leverage and room to grab rail i've gained while the indy's are keepin it relatively low and super slidey

guess i should've gone with a flush FSM

whaaa? My FSM is set up the same except with <70mm Flashbacks and it doesn't railbite even if I crank a turn out as hard as possible.

and yes, dropped indies practically are cheating for freeriding, slides makes every wheel slide like butter and you can hold them forever. Try it, you'll probably love it. I'm not a fan of how Indies turn at higher speeds, feels weird to me, but for freeriding I don't think I'll ever go back to reverse kingpin trucks.

[ChefGeoff]

whaaa? My FSM is set up the same except with <70mm Flashbacks and it doesn't railbite even if I crank a turn out as hard as possible.

i used to run 70mm wheels no problem when it was new, but its gained some flex with age and my 200+ pounds easily drives the rails into the ground now. it would bottom out when i pumped it too.

[wardlarson]

roggs rumrunner
indy 169s
radiused 66mm 80a zigzags

###### awesome setup.

[DannySmith]

Not relevant to this but how are the indy hybrids topmounted? say on a nemi for freeriding.