Page 3 of 3 FirstFirst 123
Results 41 to 50 of 50

Thread: Bustinboard?

  1. #41
    Longskateaholic KiteBum's Avatar
    Join Date
    Aug 2008
    Location
    St. Augustine
    Posts
    128
    Rep Power
    4

    Default Re: Bustinboard?

    Quote Originally Posted by -Mu- View Post
    That said though no one has given a good reason to say they're bad. It's like with S9, good boards, but so many people add hate, which has nothing to do with the baords yet people pretend it's poor quality.
    Read my previous post, I owned one and sold it before I went through a single set of wheels...I think I hit on most of the issues I had with the board. But I also ranted a bit about a better version..Try this.

    1. The kick-tail is too small.
    2. It factory finish was lacking(need sanding in the cutouts)
    3. It is a bit small(short and narrow in the tail) for control at a decent speed
    4. The rear wedging is retarded.

    And I can also say I wasn't impressed with their customer service. I asked for a set of wheel washers(some call them speed rings) with my order, guy at Bustin said "no problem we won't even charge you". Then sent me an extra truck mounting hardware kit. Honestly bang for buck, there are better boards out there.
    Being good at what you do is wonderful, an open mind is everything...



  2. #42
    Addicted Cruiser -Mu-'s Avatar
    Join Date
    Jul 2009
    Location
    Hagerstown, MD
    Age
    23
    Posts
    561
    Rep Power
    15

    Default Re: Bustinboard?

    Quote Originally Posted by KiteBum View Post
    Read my previous post, I owned one and sold it before I went through a single set of wheels...I think I hit on most of the issues I had with the board. But I also ranted a bit about a better version..Try this.

    1. The kick-tail is too small.
    2. It factory finish was lacking(need sanding in the cutouts)
    3. It is a bit small(short and narrow in the tail) for control at a decent speed
    4. The rear wedging is retarded.

    And I can also say I wasn't impressed with their customer service. I asked for a set of wheel washers(some call them speed rings) with my order, guy at Bustin said "no problem we won't even charge you". Then sent me an extra truck mounting hardware kit. Honestly bang for buck, there are better boards out there.
    I'm not saying you specifically, I didn't want to give that impression. At the risk of sounding rude there are SOO many more people on the internet. You HAVE given reasons. I'm not worried about finish, I can deal with that on my own, but the kick stuff is very preferential and details like that can make or break a board for people, I don't think it makes it good or bad, it's just not someone's taste...or it is.

    The washer thing could be a communication error, I've heard good things about their service including letting people borrow boards for free until a repair or a board build was finished. They seem to care, that doesn't mean errors don't happen. I don' think I've ever bought a PERFECT product. That's me though.
    μ

    Stay clam

  3. #43
    Fresh Fish Anubisx3000's Avatar
    Join Date
    Oct 2009
    Age
    21
    Posts
    41
    Rep Power
    0

    Default Re: Bustinboard?

    I just skated with the Bustin Crew today and it was sick!
    We visited their newly opened store on Grand Street in Williamsburg and these guys are really awesome. I had a nasty spill on the Williamsburg bridge on my way over there and they patched me up.

    Bought 150 Randals, Abec 11 No Skoolz, and some bearings.
    Sick shop, sick company, sick baords, sick rides.

    Bustinboards rock.

  4. #44
    Addicted Cruiser AfroRider21's Avatar
    Join Date
    Apr 2009
    Location
    South East Pennsylvania
    Age
    18
    Posts
    1,460
    Rep Power
    52

    Default Re: Bustinboard?

    Quote Originally Posted by Anubisx3000 View Post
    I just skated with the Bustin Crew today and it was sick!
    We visited their newly opened store on Grand Street in Williamsburg and these guys are really awesome. I had a nasty spill on the Williamsburg bridge on my way over there and they patched me up.

    Bought 150 Randals, Abec 11 No Skoolz, and some bearings.
    Sick shop, sick company, sick baords, sick rides.

    Bustinboards rock.
    the bustin crew is def. a cool bunch. they came down the the schoekill on the Schuylkill in Philly and they were pretty cool to chill with. Most of them went for a city skate afterwards. i just went to a sliding session some of the guys were having. fun ass shizz
    Quote Originally Posted by 8ftbed View Post
    Patience is a virtue and she just bitch slapped me for being impatient. :(
    Quote Originally Posted by Archy View Post
    The "blem" IS IN THE F*CKING CAD DRAWINGS.
    /thread
    libertylongboarders.webs.com philly represent!!

    a damn proud member of team WDYT

    WDYT: the thread about, wait... what are we about?
    [/SIZE]

  5. #45
    Addicted Cruiser lizardbowl12's Avatar
    Join Date
    May 2009
    Location
    Feast in the East, NH
    Posts
    382
    Rep Power
    12

    Default Re: Bustinboard?

    this thread is so full of fail. (exclusively by backwoodsbomber)
    lets clear things up:

    - bustins are about a 6 out of 10. not the worst. certainly not the best.
    - i've a hill near me on my strike with paris's and powerballs and got a high of 40mph. anything over that is ridiculous and out of the question. don't make #### up.
    - the kick tail IS pretty useless on the strike. (i own one)
    - The wedging DOES ruin most of the ride of the strike.
    - its silly cause most of the posters backing up bustin have an average of 15 posts....way to go.
    - never ridden crails. never want to.....why would you put jimz on crails for carving....your so retarded at that point backwoodsbomber i mean come on.

    if you want to GET INTO longboarding (mostly carving, cruising, commuting) grab a bustin if you want one.

    Turn on. Tune in. Drop out.
    ECSS Forever
    OCM.Milk It.
    Quote Originally Posted by Concrete Slave View Post
    Thats not being whipped. That means I want some poon

  6. #46
    Addicted Cruiser Backwoodsbomber's Avatar
    Join Date
    Nov 2009
    Location
    Pittsburgh, PA
    Posts
    489
    Rep Power
    16

    Default Re: Bustinboard?

    Don't accidentally say "jimZ" instead of "venom" or you will get ripped a new a$$hole by the SF fan boys...read this thread and learn.
    Murphy


    Comet Voodoo D2-Caliber 50's-Smoothies (80a)
    Madrid David Price-Caliber 44's-Big Zigs (80a)
    Landyachtz 9two5-Grizzlys-raceforms cs (82a)
    Loaded Bhangra-215's-zombies (84a)
    Rayne Shark Shark-Caliber 50's-Tweakers (78a) (in the mail)

  7. #47
    Banned Concrete Kahuna Justin K's Avatar
    Join Date
    Jan 2008
    Location
    oz
    Age
    19
    Posts
    2,489
    Rep Power
    0

    Default Re: Bustinboard?

    Quote Originally Posted by Backwoodsbomber View Post
    Jimz do come in different durometers bro (softer/harder)
    And as soon as I get home and on my computer (on me iPhone at the moment) I will gladly post some vids of "said shreding." haha you play tennis.
    You're a towel.

  8. #48
    Addicted Cruiser Backwoodsbomber's Avatar
    Join Date
    Nov 2009
    Location
    Pittsburgh, PA
    Posts
    489
    Rep Power
    16

    Default Re: Bustinboard?

    Quote Originally Posted by Derv View Post
    You're a towel.
    huh?? What is a towel? besides something you dry off with... and i'm assuming this is meant as an insult...why? because i said the wrong thing twice? oops... sorry guys...so so sorry. I hope i can get to sleep tonight...shame on me.
    Murphy


    Comet Voodoo D2-Caliber 50's-Smoothies (80a)
    Madrid David Price-Caliber 44's-Big Zigs (80a)
    Landyachtz 9two5-Grizzlys-raceforms cs (82a)
    Loaded Bhangra-215's-zombies (84a)
    Rayne Shark Shark-Caliber 50's-Tweakers (78a) (in the mail)

  9. #49
    Addicted Cruiser Backwoodsbomber's Avatar
    Join Date
    Nov 2009
    Location
    Pittsburgh, PA
    Posts
    489
    Rep Power
    16

    Default Re: Bustinboard?

    Nevermind...Southpark....got it. Towelie and i do have a few things in common... i to can play the tune to funky town on the touch pad of the entry door to a secret lair
    Murphy


    Comet Voodoo D2-Caliber 50's-Smoothies (80a)
    Madrid David Price-Caliber 44's-Big Zigs (80a)
    Landyachtz 9two5-Grizzlys-raceforms cs (82a)
    Loaded Bhangra-215's-zombies (84a)
    Rayne Shark Shark-Caliber 50's-Tweakers (78a) (in the mail)

  10. #50
    Addicted Cruiser komikon94's Avatar
    Join Date
    Dec 2009
    Location
    Brooklyn, NY
    Age
    18
    Posts
    721
    Rep Power
    36

    Default Re: Bustinboard?

    Are you serious? This thread was from back in November 2009.

    And to add to the thread -
    I've bought two boards, after 2 weeks of light use, the Strike and the Complex both started displaying pressure cracks that were running down the mounting holes into the meat of the board. I sold them to my friends to get them started on longboarding and settled for a Comet FSM - A REAL comfortable city pusher AND freerider that's low as balls with my Gullwing setup.

    But there boards ARE good for commuting, freestyling and cruising. Anything else such as downhill, sliding, freeriding, or anything more daring for that matter - as they say in Brooklyn fuhgeddaboutid.
    飄 移 文 化
    Quiver:
    Pink Comet FSM (Decommissioned)
    Earthwing Miniglider 33''
    Earthwing Supermodel (Hybrid 215s, Venom Tweakers)
    Earthwing Streetdeck 32''x8.25'' (Tensor 139s, Bones STF/Venom Streetsnakes)
    Earthwing Crewzer (Indy 169s, Venom Streetsnakes/Micro Motions)
    Eastbilt Bakpak 19'' (XCaliber 169s, Otang Yellow Stims)

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •