Post Your Crail Setup

**Petary791** · 06-04-2009 01:07 PM

My Crails just arrived and this is my first set of <50º trucks. In fact all my other trucks are Independents so these are also my only reverse kingpins in my quiver.

Currently I have red Venom barrels front and green and red Venom barrels back. I'm thinking of switching to yellow and red barrels front. I'm 160#. So what are you guys ridin'?

EDIT: Mine are on a flushmount Pagan, this is my high speed DH board.

**tomes** · 06-04-2009 01:21 PM

I rocked mine on a bombsquad with red/red front green/green back. I'm about the same weight as you, and I would have gone with softer bushings if i'd had them.

**stringtheory** · 06-04-2009 01:47 PM

I use Venom 90a double barrels in one set up and 90a barrel bottom cone top in another. I weigh 190.

**Mile_High_Mark** · 06-04-2009 01:49 PM

Bottom: Sabre 88a
Top: Stock Moog, Sabre 86a, Sabre 88a

**igotscars** · 06-04-2009 01:52 PM

I go red eliminator bottom red barrel top. I run em on a smoothcut and a nemy and soon hopefully a subsonic reflex.

**flannelman** · 06-04-2009 02:11 PM

Originally Posted by Mile_High_Mark

Bottom: Sabre 88a
Top: Stock Moog, Sabre 86a, Sabre 88a

how are you liking the Sabre Bushings? any reviews, or comparisons? sorry to thread jack, but i am curious.

**FlamingTaco** · 06-04-2009 02:17 PM

I run mine with 90a venom barrel bottom and stock moog top for cruising/standup sliding/mild DH, and 90a venom barrel and 85a venom barrel for faster DH. The reason for this is the stock kingpin is a bit too short for me to run the double venom barrels as loose as I like for more general purpose stuff, and the venom/moog combo actually feels surprisingly nice. I weigh 135 btw.

**Mile_High_Mark** · 06-04-2009 02:23 PM

Originally Posted by flannelman

how are you liking the Sabre Bushings? any reviews, or comparisons? sorry to thread jack, but i am curious.

Let me put it this way, I'm now spec'ing them in all the MHS Hybrid trucks and on select premium completes (and not because they're cheaper).

**transitioned** · 06-04-2009 02:59 PM

hey guys state your weight...

**Mile_High_Mark** · 06-04-2009 03:49 PM

210#

10-large-and-in-charge

**streetheap** · 06-04-2009 04:00 PM

Cool thread! I love Crails.....
Mine have new axles and are shimmed out to around 190mm
Jimz bottoms or red or green Elims all around.
Topmounted on a 10 1/2" wide / 30" WB board
I weigh 225 #

**igotscars** · 06-04-2009 04:09 PM

180lbs

10char

**Nims!** · 06-04-2009 04:25 PM

85a elim bottom
80a reflex barrel top

front and back. they were on a nemesis before but they will being on a bombsquad soon. im about 155 soaking wet.

**shrugs1434** · 06-04-2009 06:48 PM

Stock moog's, really Mark? I found them to be a yellow cylinder of hard plastic in my trucks. Couldn't turn for the life of me.

**guroo** · 06-04-2009 06:53 PM

85a Venom barrels all round on my 125 pounds felt so good.

**FlamingLongboarder** · 06-04-2009 07:03 PM

I got 90a Venoms top, 93a Venoms bottom on both trucks, but I'm probably gonna switch to 90a all around. I weigh about 180

**Mile_High_Mark** · 06-04-2009 07:14 PM

Originally Posted by shrugs1434

Stock moog's, really Mark? I found them to be a yellow cylinder of hard plastic in my trucks. Couldn't turn for the life of me.

New ones are mo' better.

**latenite** · 06-04-2009 08:51 PM

red or yellow elim bottoms with same color barrel tops. 160#

on a flushcut. used for all around downhill, 30-50 with turns.

**latenite** · 06-04-2009 08:52 PM

Originally Posted by shrugs1434

Stock moog's, really Mark? I found them to be a yellow cylinder of hard plastic in my trucks. Couldn't turn for the life of me.

i like the hard plastic moogs as a top bushing. makes the bottom do all the work and you dont need a washer

**gingermcnasty** · 06-04-2009 08:58 PM

85 a eliminators bottem
85 a barrel tops

130, feels good, but im having trouble with the washer, keeps sliping off center and i feel like its gunna dig into the barrel