G.O.G. Big Brother (Randal fit)

[Raymondo]

Won't fit Kahalani baseplate. They're using a smaller pivot pin.

If Jim-Z hangers fit on Randal, the GOG BB will fit on Jim-Z baseplate.


and yes, we'll come out with two different baseplates. Standard and adjustable.

rmn

[Shift]

I'll be buying a pair when I can get the funds and I want to match them to some Pogo plates.

[Aiyo]

$215 for 2 hangers?.... thats a bit much.

[B40Z3R]

Originally Posted by Aiyo

$215 for 2 hangers?.... thats a bit much.

sounds about right to me

[***TWITCH***]

those look yummy to my tummy

[Anjo K]

is it wrong that I want these primarily for sliding on my switchback?

[dozerdoggie]

Originally Posted by Raymondo

Here they are! First out of three:

G.O.G. Big Brother for Randal, Force, Paris, Holey, Pogo (and Bear Grizzly) baseplates!

With or without spherical. Detailed specs below.







Hanger width

- 200mm (180mm come fall)

Hanger type

- axle in-line with kingpin for maximum traction and controlled drifting, flippable
- anti torsional light weight construction

Flippable hanger

You’ll get 2 trucks in 1!

Low, standard
- stable
- easier to drift
- round turning
- 7mm lower
- You’ll need to lean more.

High, flipped
- more agile/ tippier
- grippier
- more slalom-like turning
- 7mm higher
- You’ll need to lean less.

Axles

8mm precision

Spherical Bearings

Pivot
Pivot cup, no spherical bearing

Hanger
bushing, spherical upgrade: €6/spherical

With spherical
- more precise
- quicker reaction
- holds the line well especially in sweepers
- more responsive
- harder to control in drifts and slides

Without spherical
- less precise
- softer ride, mushier
- harder to hold the line (you’ll have to lean more in order to hold the line)
- Smoother drifts and slides

Bushings

- standard barrel shape fits
- Eliminators, Stimulators and Jim-Z shape fit

Hanger only option

This hanger is designed to fit Randal baseplates. Will also fit Holey, Force, Paris and Pogo. For Bear Grizzly baseplates please contact me

Test Pilots

Sebastian Hertler
Ramón Königshausen

Design

Frank Beste


Price per set

€150 / approx. $215 USD

rmn

Are these ready for sale yet?

[Shift]

Originally Posted by dozerdoggie

Are these ready for sale yet?

I want to know, too. I have some Pogos I want to match to these.

[dozerdoggie]

Originally Posted by Shift

I want to know, too. I have some Pogos I want to match to these.

There randal type trucks so the pogos will bolt rite in

[Shift]

Originally Posted by dozerdoggie

There randal type trucks so the pogos will bolt rite in

I know. It's one of the reasons I'm so anxious for the hangers.

[xjason11x]

200 for hangars? jeeze.

unless does it include the spherical?

[Anjo K]

Originally Posted by xjason11x

200 for hangars? jeeze.

unless does it include the spherical?

I'm looking at it from the euro side & it's looking pretty good to be honest, some of the cheapest premium looking cnc hangers I can think of actually.

Maguns - 380 eur pair w/bplates
GOG DH - 150 eur hangers
I'm pretty sure the baseplates aren't going to cost 230 eur a pair (at least I hope not )

[dozerdoggie]

Originally Posted by Anjo K

I'm looking at it from the euro side & it's looking pretty good to be honest, some of the cheapest premium looking cnc hangers I can think of actually.

Maguns - 380 eur pair w/bplates
GOG DH - 150 eur hangers
I'm pretty sure the baseplates aren't going to cost 230 eur a pair (at least I hope not )

comparing price is one thing but compared to kahas there a little more its all a matter of where they sit on the gnar scale

[Anjo K]

Originally Posted by dozerdoggie

comparing price is one thing but compared to kahas there a little more its all a matter of where they sit on the gnar scale

true, about 50 euros off kahas
I should be picking up & testing some @ hog hill in a week or so, these do scream topmount at me though

[xjason11x]

wait a sec are we talking 200 euros or 200 US dollars?

[Blix]

How hard is it to read the opening post?


Price per set

€150 / approx. $215 USD

[donald20]

thanks ramon for the posting of the trucks
they are out here in germany and available(at the moment)
again,for clarification:
3 different types of trucks will be there this season
#1 the one you read about here
#2 the hanger with a baseplate
#3 the adjustable gog
right now we do have the hangers in stock
if you want spherical bearings too add 12 euros per set.
keep in mind though that there are still some tolerances to the kingpin of any randal baseplate,since
we all know that they are not cnced.but....the bearing works and does its job-again,not as good as on a cnced kingpin.
maybe you should contact cat young for those...
she is our west coast rep.

[dozerdoggie]

Originally Posted by donald20

thanks ramon for the posting of the trucks
they are out here in germany and available(at the moment)
again,for clarification:
3 different types of trucks will be there this season
#1 the one you read about here
#2 the hanger with a baseplate
#3 the adjustable gog
right now we do have the hangers in stock
if you want spherical bearings too add 12 euros per set.
keep in mind though that there are still some tolerances to the kingpin of any randal baseplate,since
we all know that they are not cnced.but....the bearing works and does its job-again,not as good as on a cnced kingpin.
maybe you should contact cat young for those...
she is our west coast rep.

does cat have them or just you

[phil6x]

these are siccckkk

[donald20]

we will send a few out to cat if there is demand
inbetween you can pm me for orders shipped from germany