Cain trucks(proto)

[Eric Nogueira]

185mm
restrictive seat
inline axles
flipable
no offset
randal compatible
8mm axles

*this is a prototype, so the axles will be re-done, and the final machining will be different

[leighgriffiths]

good work dude. keep tweaking and creating.
at the moment its basically a heavier Kooky with the restrictive b'seat?

[whereisnumderv]

we have those





make something new

[Tagsrover]

we have those

make something new

he is out there trying at least. And who is to say they are exactly the same. No one has ridden them. And with a design you have to start somewhere.

[leighgriffiths]

we have those
make something new

make the criticism productive mate. no use shutting him down when he's the one giving it a go.
by the way, those 2 trucks are no longer in production.

[sk8norcal]

wat baseplate is that?

[dozer jr]

wat baseplate is that?

force baseplates

[[(Erik)]]

make the criticism productive mate. no use shutting him down when he's the one giving it a go.
by the way, those 2 trucks are no longer in production.

the 2nd gen cindriches are still being produced

[Kenny_Ledesma]

make the criticism productive mate. no use shutting him down when he's the one giving it a go.
by the way, those 2 trucks are no longer in production.

Sandwich still has the cad drawings and you can order them still. Not sure about kookys though.


Edit: erik beat me to it

[Eric Nogueira]

we have those

[IMG]I was a Kooky[/IMG]

[IMG]I was an old gen cindrich hangar[/IMG]

make something new

#### off, and learn your ####

he is out there trying at least. And who is to say they are exactly the same. No one has ridden them. And with a design you have to start somewhere.

Thank you, take a look at the seats, even with the specs not listed, you can obviously tell its different, and thats not all.

make the criticism productive mate. no use shutting him down when he's the one giving it a go.
by the way, those 2 trucks are no longer in production.

I thought the kookys still were? hmm.

good work dude. keep tweaking and creating.
at the moment its basically a heavier Kooky with the restrictive b'seat?

Thank you, and i havent looked at kookys in depth, so i cant say for sure, this is just what i wanted in a truck.

thanks for the comments so far guys, im not going to say any other specs until we get this dialed in for sure. you can possibly expect these for sale in the future

[Eric Nogueira]

wat baseplate is that?

|
\ /

force baseplates

correct you are, sir

[K-Rimes]

Be very careful with those axles. You've created a shear point by having the threads go into the hanger.

[Eric Nogueira]

Be very careful with those axles. You've created a shear point by having the threads go into the hanger.

Dont worry, those are pretty temporary, im planning to drill them out to ~3/8ths and thread them for normal screw in axles(like radikals, but homebrew), or press them in straight 8mm. Thanks though

[pennypusher]

kooky has stopped making trucks for awhile,those are 1st gen cindrich and he will make them if you want them.

your trucks look good so far,ignore the haters and keep it up.

[Longbord1]

These actually remind me of GOG hangers.

Keep up the good work.

[Sandwich]

Yeah dude, I'm still around and can make the 1st gens again if needs be, but the 2nd and 3rd both have the same geometry....
Never the less, Eric, you being 16 (if that is in fact true) mad props to you for making your own stuff. I hope you do well with it. I can sell you some nice axles if you'd be interested (they are a little pricey, but really good). I'd also recommend looking in the Surf Rodz trucks. They use a ground accurate bolt as there axle. It seems like they have a good idea. If you can drill a very accurate hole about .5 inches or so into the hanger, and then start your threads deep in the hole so none of them are on the out side of the hanger, you get rid of that stress riser that K-Rimes is talking about and you can use a bolt that you can buy from some supplier.
Anyway, like what others have said, don't let the haters get you down, keep up the good work.

Dave Cindrich

[speshlspeclsteak]

they remind me of these

[longboarder84]

they remind me of these

What are those?

[FL_RIDER_93]

A different set of trucks made by a different teenager.

[speshlspeclsteak]

Confed killaz