bushings!!!!!!!

**counterstriker24** · 11-15-2009 08:04 AM

ok so im getting a 46 by 10 inch longboard and probably invader 183mm trucks (all i can really afford right now)and i need to know what bushings to get. im over 200 lbs and i want to able to carve and completely turn around on a narrow street and decent stability. what do u guys think i should get?

**tomes** · 11-15-2009 08:13 AM

Originally Posted by counterstriker24

ok so im getting a 46 by 10 inch longboard and probably invader 183mm trucks (all i can really afford right now)and i need to know what bushings to get. im over 200 lbs and i want to able to carve and completely turn around on a narrow street and decent stability. what do u guys think i should get?

93a barrel cone or barrel barrel. the double barrel will have more resistance to turn and more rebound, but the barrel cone will carve harder. You could probably throw a 90a barrel in there (with a green barrel), but I think your 200lbs will handle double green (90a) fine.

**atomicturtle462** · 11-15-2009 08:13 AM

Do a search. Bushings. Different types and how to set them up.

**jsweriduk** · 11-15-2009 08:17 AM

Have you bought the board yet? If you haven't, you should look into something shorter. Turning around on a narrow street will be tough with a 46 inch board. And go with sabre bushings, purple and orange

**counterstriker24** · 11-15-2009 09:06 AM

i havent bought it yet and i need suggestions on trucks and then bushings for those trucks

**Ogre** · 11-15-2009 09:08 AM

If you're in the States.. email Mark at Mile High Skates.. he'lll hook you up

**Whereisnumnum** · 11-15-2009 09:09 AM

i good set up is to have blue (85a) barels board side and white (73a) roadside. i would sugjest khiros because they are cheap and you can experiment with them. if that bushing setup works for you then you can invest in some venoms or mabye reflex bushings. they are a little more expencive but the rebound will be alot better.