bushings for nemesis

[cam506619]

Should I get 93a elims bottom/87a barrel top in both trucks or 90a elim bottom/90a barrel top in both trucks?I'm talking about venoms btw. I weigh 140ish and I want to keep it bidirectional.my setup is rayne nemesis and 42 Randals.

[gabetar]

What kind of riding are you going to do? I weigh about 200 and that is kinda hard for me. THen again, I like soft bushings.

[CasterTown]

Go 90a bottom, 87 top.

[cam506619]

Speeds up to 50mph and sliding and cruising around a little not alot though because I have a dervish for that so its mostly speed and sliding

[cam506619]

Go 90a bottom, 87 top.

90a elim and 87a barrel?

[partninjas]

At 140lbs I would run a much softer Elim. You would probably do fine with an 85a elim and 85a barrel. You could even drop a duro down on the elim.

Really we can't say for sure. You will need to just try it out and see. You may want to pick up a bunch of barrels and elims in different duros and try out a bunch of different combos.

For your weight I wouldn't go over 90a though. I would however start with 85/85 and then go from there. I would try some 81a elims too. Elims are wider are sort of like having a barrel in a duro up. I suggest trying combos of the below. Maybe throw in 87a in the mix too.


85/85 barrel/barrel
81a elim/85a barrel
85/85 Elim/barrel
87a/85a barrel/barrel
87a/87a barrel/barrel
90/85 barrel/barrel

4X 85a barrel, 2x 90a barrel, 4x 87a barrels, 2x 85a elim, 2x 81a elim,

[loserplayer]

85elim/85barrel
if you want something a little harder switch the barrel a little higher

[UltyHuck13]

At 140lbs I would run a much softer Elim. You would probably do fine with an 85a elim and 85a barrel. You could even drop a duro down on the elim.

Really we can't say for sure. You will need to just try it out and see. You may want to pick up a bunch of barrels and elims in different duros and try out a bunch of different combos.

For your weight I wouldn't go over 90a though. I would however start with 85/85 and then go from there. I would try some 81a elims too. Elims are wider are sort of like having a barrel in a duro up. I suggest trying combos of the below. Maybe throw in 87a in the mix too.


85/85 barrel/barrel
81a elim/85a barrel
85/85 Elim/barrel
87a/85a barrel/barrel
87a/87a barrel/barrel
90/85 barrel/barrel

4X 85a barrel, 2x 90a barrel, 4x 87a barrels, 2x 85a elim, 2x 81a elim,

listen to what this guy said.

not kidding.