Something I noticed with Stims and R2s...

[FightingTheTide]

The outer edge of Stims seem to fit into the "lip" on the bottom side of the R2 hanger, which seems to be the main contact point for the stims. Im not sure if the inner area of the stim touches the hanger, but if it didnt that would explain why my stims seem to carve so deep on my R2s.

MHM, lately you mentioned how its important to get the correct height on your bottom bushing so it matches the stock bushing height....do I need to use washers on my R2s with stims?

So now im looking for 50 degree baseplates that fit with R2 hangers.

Anyone know where I could get some?

[worldwide]

So now im looking for 55 degree baseplates that fit with R2 hangers.

Anyone know where I could get some?

you could use a 5 degree wedge on a 50 degree baseplate

[Mile_High_Mark]

The outer edge of Stims seem to fit into the "lip" on the bottom side of the R2 hanger, which seems to be the main contact point for the stims. Im not sure if the inner area of the stim touches the hanger, but if it didnt that would explain why my stims seem to carve so deep on my R2s.

MHM, lately you mentioned how its important to get the correct height on your bottom bushing so it matches the stock bushing height....do I need to use washers on my R2s with stims?

So now im looking for 55 degree baseplates that fit with R2 hangers.

Anyone know where I could get some?

Single thick washer is fine with Stim and Randal 180/150 hanger. If you flip the hangers, run two washers.

[FightingTheTide]

Single thick washer is fine with Stim and Randal 180/150 hanger. If you flip the hangers, run two washers.

Thanks MHM...do you know who sells 50 degree baseplates?

So now im looking for 55 degree baseplates that fit with R2 hangers.

Anyone know where I could get some?

you could use a 5 degree wedge on a 50 degree baseplate

My bad, i meant to say 50 degree.

PS - I hate risers.

[bpz]

You have R2 hangers, but not the baseplates they came on?

[FightingTheTide]

I have the baseplates, but I want new ones since the holes are all mis-drilled.

[funkyphreakout]

You can have mine, I'm trying to get rid of them because the holes are all misdrilled.

and by I mean and and that randal fuller should get out of the business

[FightingTheTide]

I have the baseplates, but I want new ones since the holes are all mis-drilled.

by "new ones" I meant non-randal baseplates.