Post yer Original equipped decks!

[Bushman]

Lets see em! any and all Original Truck equiped decks!

i'd start out but no camera ....oops...

250mm (S10) Originals, Landy Wedgeflex deck with custom griptape, bastardized Ceramic Biltins, and big arse 78a Gumballs, and funky stickpeople riding the wave logo under the deck

Carving machine!

[phidauex]

Um, its not built yet! Hehe, here is the template for my next deck. Its been pressed already with a moderate concave and a slight kick to the tail, no camber, but I haven't cut it out of the blank yet, because the final shape of the cutouts will be determined once the trucks are mounted.

Its 48" long, 9" wide, and has a wheelbase of 30". The UPS man should be here in the next hour or two with my Original S8s, which will be mounted drop-thru. It'll roll on Bones Reds (i'm cheap) and 76mm 81a Gumballs.

Should be good fun!



peace,
sam

[HerBDerb]

No pics for me.

An ancient S9 OG cloud9 (with amatuerly done wheel cutouts)
S10 Originals
Gripless 75a/76mm nine-balls with "rain treads"
Bones Reds
and old wornout grip, with a million layers of paint on it

Faceplant Machine!

[haole haole]

pics soon.

Sector 9 (pintail shape without tail?)
81a Gumballs

[Rustyfriend]

pic is in quiver pics topic, semi recent

Custom Ryan deck, nice paint job top and bottom
s6's
biltins
78a avalons

[charger_doc]

I have a Loaded Pintail (flex 4) with Original S6 and Gumballs 78a.
Pics as soon as i can.

[Rabid Skunk]

Original Custom 45
S10's
Power Paws

Excuse the cell phone quality, it's all I have:

[Muttlips]

Loaded Vanguard 38" (flex-4)
Original S8's
Gumballs (78a)

[Foot]

Hey how do those S8's ride on the vanguard? I was thinkin of getting some for mine.

[Muttlips]

Hey how do those S8's ride on the vanguard? I was thinkin of getting some for mine.

It's a carver's wet dream -- it can practically u-turn around a manhole cover when dialed in loose (it can also pitch you pretty easy, too). But once you get used to it, it's really fun -- endless sharp carves, predictable slides, and nice pumping. You can also tighten it up a bit, and go a bit faster with more confidence. I put the combo together after hearing Scott say the original decks made a good combo with his trucks, and I'm super pleased with it. If you like an extreme carving machine, I can highly recommend this set-up.

[boogieman]

my homemade carver, insane, very flexible and fun, the most ridden longboard in my quiver, Originals are the best.

[Rabid Skunk]

I'd fall on that board too much. I'd be looking down the entire time. What I'm trying to say is that I like the grip.

[Loki440]

there you go

[waves4ryan]

Um, its not built yet! Hehe, here is the template for my next deck. Its Its 48" long, 9" wide, and has a wheelbase of 30".

peace,
sam

Ours is quite similar to yours! It's a Black 29 (defunct) deck that's 46" by 9.25" with a 30 inch wheelbase. It's setup with S8s and flashbacks (for now). Very similar template, I think but this one has a very tiny swallow tail.

[Sensei]

Oh, alright.







Bamboo Fatboy 48 inches.

That's the Wifey's LBL Drop pin in there with Exkates too.

[Muttlips]

His & hers -- isn't that cute! Seriously, those are gorgeous boards, and it's great your wife skates too. Love those decks!

[Original]

This is probably cheating....



Thats my baby at the moment. Along with a few prototypes which will remain nameless.
-Scott

[Original]

there you go

That is probably the sickest use of metallic paint I have ever seen.
Awesome work man.

[Mile_High_Mark]

Hey Scott/Original,

Hook me up with some trucks, por favor. 8)

[Original]

Hey Scott/Original,

Hook me up with some trucks, por favor. 8)

Let me know what you are looking for Mark,
Howd the testing of those S8s go? I hadn't heard back in a bit.

PM me or drop an email we will hook it up.