Neep help setting up Tracker Fulltracks on my board

[xunkn0vvnx]

I have tracker fulltracks installed on my 28" x 7.5" mini board with 21" wheelbase. Trucks are stock, and I am using this board for an all around campus cruiser, and carving machine. Speeds will be around 25 mph, which may be fairly high for a mini.

I was wondering how I should setup the truck bushings wise, and also riser or wedging rise. I am 175 lbs. Could someone also link me to the tracker picture on how to wedge?

[bpz]

Get a pair of Khiro soft wedges along with a few soft 1/8" riders. De-wedge the back truck: put one of the Khiros under it with the thin side facing the front of the board. Also put a 1/8" soft riser under it to avoid wheelbite.

Take the other Khiro wedge and use it to wedge the front truck, again, with the thin side facing forward. Take another 1/8" riser and cut it in half. Take the two halves, stack them together, and put them on top of the fat part of the Khiro wedge. This will make the front turn even more

Get 2 yellow barrels for the back truck, and either 1 white/1 blue for the front or 2 blues. Should pump, cruise, and carve very nicely.

[xunkn0vvnx]

Damn... that sounds like a nice setup, im going to try it out. THANKS

[wombat boarder]

only one thing remains....pictures
where are they? what are we payin yah for?

[xunkn0vvnx]

huh?

[xunkn0vvnx]

Oh yeah, can anyone link me to that Tracker wedging guide?