bennet help

**gabriel[abc]** · 01-04-2009 07:57 PM

alright so im thinking of buying some 4.3's for slalom and cruising
someone give me some help about a good bushing combo to replace the stock kit?

i weight about 210lbs.

**Shiyuchi** · 01-04-2009 08:27 PM

orange/Blue/red khiro cone top, blue barrel and orange/blue/red cone bottom?

I'd say just get the khiro kit and try combos out yourself.

And you could always use venoms and make up for the height with washers or something.

**whayong** · 01-09-2009 02:09 PM

Holey reds. The smokes will be to soft for you @ 210lbs.

**243racing** · 01-09-2009 02:39 PM

I use the stock randal yellow bushings. It's super divey and reboundy funness.

**Blix** · 01-09-2009 02:49 PM

Venom barrels fits perfectly if you add an extra cup washer at the bottom(two total)

**Zap** · 01-09-2009 02:56 PM

On my 6.0's I use a holey red bottom with holey blue top, then vice versa for the back. Love it.

**Archy** · 01-09-2009 03:14 PM

Originally Posted by whayong

Holey reds. The smokes will be to soft for you @ 210lbs.

The reds are almost too soft for me at 190.

Originally Posted by Blix

Venom barrels fits perfectly if you add an extra cup washer at the bottom(two total)

That's a good tip, Blix. Gonna try that whenever we thaw out here.

**sniffleless** · 01-09-2009 09:59 PM

At 185 lbs I find the stock urethane bushings good for carving and cruising after I removed the bottom washer.
For slalom and pumping I use orange Khiro barrel bottoms or orange/white Khiro barrel bottoms shimmed up with a couple nylon washers. Again I'm 185. So that may be a bit soft for you. This is just for the front truck. When I use a Bennett in the back I go stiff with all Yellow Khiro barrels.
If you want a fun carver like an Original truck. I use Tracker hourglass bushings sitting on a black Khiro barrel top. Super carvy with a good return to center for me (again at 185).