| |
-
Need the grippiest 70mm and below
I'm gonna be running a nimble setup on my Bustin Spliff with blue venoms all around. I'm just having trouble looking for a really grippy wheel for pedestrian slalom when I get back to school. However I want the wheel to have some good roll speed as well. With the riser I've tested, the biggest wheel I can accommodate is 70mm.
Some wheels I have in mind are:
77a Pink ZigZags 70mm
75a or 77a Tunnel Tarantulas 70mm
75a Flashbacks 70mm
77a Avalons 68mm
Basically, I want minimal to no slide, high grip, and a fast wheel. Any help narrowing down my choices would be great.
Soda Factory -- Earthwing -- Cult -- Surf-Rodz -- Independent -- Sabre -- Venom
-
-
Re: Need the grippiest 70mm and below
Flashbacks DO NOT grip. 69mm race form? 72a avilas
At the top of a hill at a very rapid speed there's only one place to go.
At the top of a hill at a very high speed there's nowhere to go but down.
-
Re: Need the grippiest 70mm and below
 Originally Posted by SaveGas
I'm gonna be running a nimble setup on my Bustin Spliff with blue venoms all around. I'm just having trouble looking for a really grippy wheel for pedestrian slalom when I get back to school. However I want the wheel to have some good roll speed as well. With the riser I've tested, the biggest wheel I can accommodate is 70mm.
Some wheels I have in mind are:
77a Pink ZigZags 70mm
75a or 77a Tunnel Tarantulas 70mm
75a Flashbacks 70mm
77a Avalons 68mm
Basically, I want minimal to no slide, high grip, and a fast wheel. Any help narrowing down my choices would be great.
The Flashies aren't that sticky. If it were up to me I'd go with the Avalons...that lip just screams stickiness.
Gravity BL32 - Ace 44s/MHS Bearings/62mm 81a Bennett Alligators
Motion Bigfish VLAM2 - Gullwing Chargers/Biltins/70mm Earthwing Smokers
-
Re: Need the grippiest 70mm and below
74a or 77a gravity burners....
i have 80a and i love them
oh hey
-
Re: Need the grippiest 70mm and below
 Originally Posted by gabetar
Flashbacks DO NOT grip. 69mm race form? 72a avilas
Well avilas are 75mm
Gravity BL32 - Ace 44s/MHS Bearings/62mm 81a Bennett Alligators
Motion Bigfish VLAM2 - Gullwing Chargers/Biltins/70mm Earthwing Smokers
-
Re: Need the grippiest 70mm and below
Yeah, I've looked into avilas, but they're just too dang big for my setup .
Soda Factory -- Earthwing -- Cult -- Surf-Rodz -- Independent -- Sabre -- Venom
-
Re: Need the grippiest 70mm and below
 Originally Posted by SaveGas
Yeah, I've looked into avilas, but they're just too dang big for my setup  .
To be quite honest I find the Bustin Bocas to be rather grippy. They are my favorite wheel for campus freeriding. Its too bad to here that the spliff wont do avilas because those are my fav pedestrian wheel.
-
-
Re: Need the grippiest 70mm and below
s9 69mm 78a. very very grippy.
SirKale Slide Slabs
Check em out here:
http://www.silverfishlongboarding.com/forum/longboarding-skateboard-vendors-manufacturers/125028-sirkale-slide-slabs.html
Send me a PM to purchase some Slabs.
-
Re: Need the grippiest 70mm and below
 Originally Posted by SaveGas
I'm gonna be running a nimble setup on my Bustin Spliff with blue venoms all around. I'm just having trouble looking for a really grippy wheel for pedestrian slalom when I get back to school. However I want the wheel to have some good roll speed as well. With the riser I've tested, the biggest wheel I can accommodate is 70mm.
Some wheels I have in mind are:
77a Pink ZigZags 70mm
75a or 77a Tunnel Tarantulas 70mm
75a Flashbacks 70mm
77a Avalons 68mm
Basically, I want minimal to no slide, high grip, and a fast wheel. Any help narrowing down my choices would be great.
 Originally Posted by SaveGas
Yeah, I've looked into avilas, but they're just too dang big for my setup  .
TTs and 3dms are super grippy. You will want 3DM Avalons. 4pres are pretty grippy for 80a as well.
Grippiest.
-
Re: Need the grippiest 70mm and below
 Originally Posted by jar5173
TTs and 3dms are super grippy. You will want 3DM Avalons. 4pres are pretty grippy for 80a as well.
Grippiest.
Any reason why you pick the Avalons over the Tarantulas?
Soda Factory -- Earthwing -- Cult -- Surf-Rodz -- Independent -- Sabre -- Venom
-
Re: Need the grippiest 70mm and below
I can vouch for the s9 69mm 78a RF. They are so amazing. They grip hard and slide when needed.
TUTONE skateboards
WaterWorks Hydroponics
Northwest Snowboards (NWS)
-
Re: Need the grippiest 70mm and below
The venoms are mad mad grippy.
Plush too.
 Originally Posted by gavmck
Shut up and let your skating do the talking.
 Originally Posted by Blix
Stop sucking, and don't blame your bushings...:rolleyes:
 Originally Posted by liveyourlife
I took 4 computer classes in high school...I know my sh1t
-
Re: Need the grippiest 70mm and below
 Originally Posted by SaveGas
Any reason why you pick the Avalons over the Tarantulas?
I would think it's because the lip on the Avalons is a little sharper.
Gravity BL32 - Ace 44s/MHS Bearings/62mm 81a Bennett Alligators
Motion Bigfish VLAM2 - Gullwing Chargers/Biltins/70mm Earthwing Smokers
-
Re: Need the grippiest 70mm and below
 Originally Posted by SaveGas
Any reason why you pick the Avalons over the Tarantulas?
Just the urethane formula. All 3dm formulas are grippier than the average. For a completely random example, 80a (Orange)4pres are much grippier than 80a (Lime)ZigZags. Kind of like, why are size 10 Vans bigger than size 11 Chucks etc? Thats just how things are. TTs are super grippy as well. Similar feeling wheel actually. 3dms just grip better (I think they were originally poured for slalom, which makes sense since grippy wheels are essential in slalom.)
-
Re: Need the grippiest 70mm and below
seven-0's or lime zigz....
75a grippins....
72a avila's....
Hybrid and Proud.
Dangerous Decks Antipodean Ambassador
Alphabetrix Clothing
Babie Slave Truck Tester
Smoking Gun Pucks
-
Re: Need the grippiest 70mm and below
 Originally Posted by melifont monk
seven-0's or lime zigz....
75a grippins....
72a avila's....
Dude I don't know about Seven-0's, and I agree with the Avilas, but despite the name, grippins aren't the grippiest, and Lime Zigs just doesn't make any sense. Retro makes some of the driftiest urethane forumla. Even the pink wheels drift well. I have had a few sets of Lime Zigs and Lime BigZigs, and they have always been driftier than the average 80a wheel. I don't understand why you wouldn't at least advise the Pink Zigs?
-
Re: Need the grippiest 70mm and below
because at the end of the day those are from my own riding experience, grippy wheels that don't try and kill you when it all goes wrong.
besides that, i honestly didn't remember that 77a zigz exsisted....still living in the day where they weren't available.
plus, there is an awful lot of opinion and preference in any thread....
Hybrid and Proud.
Dangerous Decks Antipodean Ambassador
Alphabetrix Clothing
Babie Slave Truck Tester
Smoking Gun Pucks
-
Re: Need the grippiest 70mm and below
exactly: opinion and preference
I know some people on the 'fish call the grippins slippins and I also know that all wheels can be slid, but I have found the grippins to be great for traction. I have the 75a, but also the 84a and they grip surprisingly well.
Same thing with the EW Superballs, some said they gripped like mad and others disagreed. I've put hundreds of miles on mine and they grip just fine.
http://longboardskater.com/mm5/merch...ory_Code=EWLSW
Last edited by stocago; 07-24-2009 at 07:46 PM.
Reason: added link
-
Re: Need the grippiest 70mm and below
66 burners seems to be quite grippy too....
Hybrid and Proud.
Dangerous Decks Antipodean Ambassador
Alphabetrix Clothing
Babie Slave Truck Tester
Smoking Gun Pucks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks