need help with front and rear bushings and bearing spacers..??

[xxshinbobxx]

hey im ordering a loaded dervish and this is my setup so far

flex : flex 1
trucks : randal 180mm truck,50 degree raw
wheels : orangatang in heat,orange.75mm/80a
bearings : bones red bearings
the problem is i don't know what front and rear bushings to get..??
i weigh 180 lbs and i would be mainly carving pumping no bombing hills
also should i get bearing spacers,if so what ones..?
oh and one last thing what do all these products do cus i have an option of ordering them with my loaded dervish but i have no idea what they are..?

2 x Kingpin 2.5", Grade 5 ...??

2 x Kingpin 2.75", Grade 8, Zinc Coated ....???

2 x Kingpin 3", Grade 8, Zinc Coated ...????

2 x Randal Titanium Kingpin, 3" .....?????

thanks

[gavmck]

Get some purple sabres for bushings both front and rear. Hella carvy and fun.

You will want the 2.75" Kingpin to replace the standard randal 2.5" one, otherwise you will have to overtighten those sabres. The kingpin is the bit that holds the hanger onto the axle and what you put the bushings on.

And get some .400 (~10mm) spacers for an 8mm axle.

ZING!