landyachtz evo setups

[BoardDuDE630]

I thought about it but the cracks run all the way down both sides starting at the drop bends, and I think the board might actually be split all the way through the middle.

ps sorry to the OP for going off topic, once again let me recommend good ol' 35/50 randals

mine was the exact same way plus the some plies were a little off (longer than the rest)
so i sanded it down a bit, painted it and epoxied the FU ck out of it and its perfectly fine

im actually thinkin about gettin another one just because

[RastaRocket]

mine was the exact same way plus the some plies were a little off (longer than the rest)
so i sanded it down a bit, painted it and epoxied the FU ck out of it and its perfectly fine

im actually thinkin about gettin another one just because

hahah i dont doubt ur fix at all, but i think you getting another evo can be alot more justified than "just becasue" lol

[Whereisnumnum]

09 evo
black randal RII 180's
lime big zigs
ranye blazers

(best board ever even for free riding)

[Bookworm]

evo now on crails with venom barrel bottoms, and some unknown cones top.

ptang inheats and mixed up bearings.

[Viebster]

Evo, randals, purps tangs, reds

[ScottyJ]

09 Evo, 852's unflipped with Randal red bushings, and 81a Avilas w/Biltins. Like this it's a badass carving machine. I've taken it to about 40mph on numerous downhill runs with no problem.

[Jesse Dishno]

got some lime bigzigs now and im going to be getting 80a nersh wheels.

so my setup is 08 evo, 190mm smokies with sphericals, lime bigzigs/80a nersh wheels

[ross932]

when you guys say 35/50 randals. are you using the 35 baseplate with the 180 hangers?

im thinking of doing 42/42 or 42/50 randals. with flywheels and playing around with some angled risers

i heard some guy broke his leg cause the randal 180 hanger poped out of the 35 baseplate, so i dont really want to mix those trucks.

i also have crail trucks to try on it too.

[snozzboarder55]

when you guys say 35/50 randals. are you using the 35 baseplate with the 180 hangers?

im thinking of doing 42/42 or 42/50 randals. with flywheels and playing around with some angled risers

i heard some guy broke his leg cause the randal 180 hanger poped out of the 35 baseplate, so i dont really want to mix those trucks.

i also have crail trucks to try on it too.

ya, BDirthead busted himself up good when the pivot popped out. BUT this can be fixed with a new pivot, like a nylon tube that fits in the pivot bushing and fits the pivot.

[SteveC]

35* C7 front, 42* Kooky back.
200mm Kooky hangers.
83a durians at the moment.

[BoardDuDE630]

when you guys say 35/50 randals. are you using the 35 baseplate with the 180 hangers?

im thinking of doing 42/42 or 42/50 randals. with flywheels and playing around with some angled risers

i heard some guy broke his leg cause the randal 180 hanger poped out of the 35 baseplate, so i dont really want to mix those trucks.

i also have crail trucks to try on it too.

Yea, I do. Its pretty much luck of the draw with them (35* bp and 180 hangers) or unluck in this case. All you have to do is get a new pivot cup, you can use nylon tube but I just switched the pivot cup from a 50* plate and it worked (I'm pretty light so I would just go with nylon tubing).


I am now running:
87a roadside/85a boardside front
90a/85a back
Venom barrels

[HEiGHT iZ NaSTy]

So pumped. Just rode my new Evo I got for christmas earlier today. 80A In Heats, 42 degree 180mm RII's (black), redz bearings then for bushings I have Venom elims, 93A/90A Back Truck 93A toward the board. 90A/87A Front Truck 87A toward the street. This ###### thing flys

[Jesse Dishno]

when you guys say 35/50 randals. are you using the 35 baseplate with the 180 hangers?

im thinking of doing 42/42 or 42/50 randals. with flywheels and playing around with some angled risers

i heard some guy broke his leg cause the randal 180 hanger poped out of the 35 baseplate, so i dont really want to mix those trucks.

i also have crail trucks to try on it too.

the truck has nothing to do with why it popped out. he probably had the trucks rediculously loose and the kingpin fell off. its like saying im not gonna buy randals because some guy bent his axles on them.

i ran 35/50 for the time i didnt have smokies and they rode just fine.

[permaculture]

2009 Evo
Sabre 200mm trucks
76mm 78a Kryptonics Classic wheels

Even with 75mm O'Tang InHeats, which are 56mm wide, I can still turn the trucks until they reach full lock without any wheel bite.

[snozzboarder55]

the truck has nothing to do with why it popped out. he probably had the trucks rediculously loose and the kingpin fell off. its like saying im not gonna buy randals because some guy bent his axles on them.

i ran 35/50 for the time i didnt have smokies and they rode just fine.

no, the 180 hangers dont sit all the way in the pivot, it popped out causing instant wheelbite. that's with the stock 35 pivot bushing, you can remedy this with a nylon tube pivot.

[Batyman33]

anyone ever rock indy hybrids on an evo?

[ross932]

no, the 180 hangers dont sit all the way in the pivot, it popped out causing instant wheelbite. that's with the stock 35 pivot bushing, you can remedy this with a nylon tube pivot.

nylon tube? wtf.... so go to home depot and get a nylon tube and cut it up. or am i missing something here?

[snozzboarder55]

nylon tube? wtf.... so go to home depot and get a nylon tube and cut it up. or am i missing something here?

ya, as seen here Tube Pivots DIY

make sure the inner diameter of the tube fits snugly around the pivot and that the outer diameter fits tight in the baseplate.

[ross932]

ya, as seen here Tube Pivots DIY

make sure the inner diameter of the tube fits snugly around the pivot and that the outer diameter fits tight in the baseplate.

oh badass!

i love confusing home depot employees..... it's one of my other hobbies.

[snozzboarder55]

oh badass!

i love confusing home depot employees..... it's one of my other hobbies.

get more friends...

j/k