landyachtz evo setups

**Blix** · 01-03-2010 06:22 PM

Keep it with the 35* plates, it's the OG Evo setup.

**Jesse Dishno** · 01-03-2010 06:25 PM

im thinking of selling my smokies and saving for 38/38 aeras. its a possibility, but i dont know, still debating

**streetheap** · 01-03-2010 06:27 PM

Originally Posted by Blix

Keep it with the 35* plates, it's the OG Evo setup.

+1.
The narrower hangers and the dead rear make it a downhill machine. You'll get great grip (for a lowered board) with lime Zigs or Bigzigs on those 160mm hangers.
Like a stretched and lowered slalom rig.

**coercive** · 01-04-2010 10:14 AM

http://www.landyachtz.com/images/ima...imgs/ACF94.jpg

6 wheels or go home.

**BoardDuDE630** · 01-04-2010 12:45 PM

Originally Posted by howdyrowdy

I don't know much about the evo's, i've just gotten into DH last summer.

My friend came by last night and gave me this evo and said "I don't have much use for this deck and trucks (randal DH's) anymore so it's yours, have fun".

So I have two questions,

What year model is this deck? And, will 3" KP's be long enough for Venom barrels to fit these trucks?

Thanks.

3" kp is good for the dh 35* bp
but for the R-II 50* if you get it you need 2.75" or it will be too long.

Trust me I've had to saw down 3 3" kp cause they were to long for the 50* plates

**Bruce22** · 01-04-2010 12:53 PM

Bears (forgot the angles and didnt care aobut them too much back then)
Karrots
Flys
Evo
= LAST FOREVER

When it was new

used it pretty well....

It broke so I fixxed it with hot glue and its been perfect and awesome for 2 and a half years of abuse
its been taken to the west coast twice and survived. the evo is such a tank

**GhettoNinja06** · 01-18-2010 09:52 PM

Custom Carbon Fiber Evo
Vicious Grip
Randal II 35*/50* trucks
Bones Swiss bearings
Orangatang InHeats 75mm 80a
Reflex bushings (Lime/Lemon/Orange)
Khiro 1.25" phillips trusshead hardware
Khiro 1/8th" shock pad

Bushing and total wedge/dewedge baseplate angle diagram.

**streetheap** · 01-18-2010 10:10 PM

That is entirely sick. Since it says "custom", you did that yourself I take it?
Nice...er, diagram too.

**GhettoNinja06** · 01-18-2010 11:52 PM

Originally Posted by streetheap

That is entirely sick. Since it says "custom", you did that yourself I take it?
Nice...er, diagram too.

Thanks! Yessirr. It used to look like this:

I also want to put a Landyachtz sticker on it. Kinda like the Carbon Evo.

Haha thanks, I thought so too.

I always have people asking about my bushing and bp setup so that is an easyer way to see it.
edit: I actualy just got rep for it! lol

**jessse** · 01-19-2010 01:52 AM

Originally Posted by GhettoNinja06

Custom Carbon Fiber Evo
Vicious Grip
Randal II 35*/50* trucks
Bones Swiss bearings
Orangatang InHeats 75mm 80a
Reflex bushings (Lime/Lemon/Orange)
Khiro 1.25" phillips trusshead hardware
Khiro 1/8th" shock pad

Bushing and total wedge/dewedge baseplate angle diagram.

You hav doen a very nice job on that board laying the carbon.

+rep

I hav to spread more rep to other people so ill pros do it tomoz

**PapaDread** · 01-20-2010 02:50 PM

2010 Carbon Evo,190/40 Smokies,Jim Z wht,LY ceramics and MonsterHawgs or BigZigs.Gets me all teary eyed just think'n'bout My baby

**billygoat23** · 01-20-2010 07:37 PM

Randal 160mm DH Hangers 35/50 plates
Gumballs (Soon to be lemon or lime zigs or big-zigs, can't decide)
constantly changing bushings

**Mr Longboarder** · 01-20-2010 07:43 PM

Green tree evo
Paris trucks with the nose dewedged so the trucks almost level
Purple In heats

**Eminentus** · 01-21-2010 12:25 AM

I love this thing. I only wish it was more versatile.

50/35 Paris + HiGrades

**Fortune** · 01-21-2010 01:15 AM

Originally Posted by BoardDuDE630

3" kp is good for the dh 35* bp
but for the R-II 50* if you get it you need 2.75" or it will be too long.

Trust me I've had to saw down 3 3" kp cause they were to long for the 50* plates

Really? My 2.75" KP in my 50* plate isn't long enough to fit two washers and two bushings on without either having the nut on too loose (rubber piece isn't holding the nut on) or the bushings being tightened down too much for my liking.

Gonna grab a couple 3" KPs tomorrow and some extra 2.75" KPs.

**cuzz467** · 01-26-2010 02:44 PM

what used to be of my evo

bear front charger back.reason i used a charger in the back because they felt dead and my front truck got ran over i'm lucky it was only the front truck.
sanded

chargers on 52 90a conicals top all around 90a barrel bottom all around

**bombhill_bong** · 01-26-2010 03:00 PM

Does anyone have gullwing stalkers on their evo?

**Bookworm** · 01-26-2010 03:08 PM

Originally Posted by bombhill_bong

Does anyone have gullwing stalkers on their evo?

no, stop repeating your question over and over. 40* trucks sounds like a great plan and grab a good bunch of bushings to play with instead.

then if you don't like the stalkers even with good bushings you can swap out for better trucks and still have a bunch of bushings, instead of just having two sets of trucks with shitty bushings (randals and gullwings, say)

**bombhill_bong** · 01-26-2010 03:57 PM

ok i just wanted to see if anyone else had them calm down

**streetheap** · 01-26-2010 04:01 PM

Originally Posted by bombhill_bong

ok i just wanted to see if anyone else had them calm down

FWIW I think those trucks SHOULD (unless they're shitty and don't pivot or something) be pretty tits on your Evo. 40* trucks and 170mm width is a pretty good fit for that board.

You must spread some Reputation around before giving it to Bookworm again.