your dh setup

[Belak4life]

Voodoos have poor wheel clearance, especially up front.

true, but what I'm wondering is how people are able to run loose trucks along with 70 mm wheels without risers.

[djona]

true, but what I'm wondering is how people are able to run loose trucks along with 70 mm wheels without risers.

i run 174 smokies and either 69mm hotspots or 70mil zigzags on my voodoo
with only a thin shock pad
(green stim front, blue stim backs)

no bite

[seche2001]

Here is my new DH board! Just received it this afternoon
Didn't have the chance to really try it yet thought cuz it's raining
It looks sick can't wait to try it other than going to the corner store and back!
Thx Julian

[AJ]

Nice Comishevo!

[Belak4life]

i run 174 smokies and either 69mm hotspots or 70mil zigzags on my voodoo
with only a thin shock pad
(green stim front, blue stim backs)

no bite

I run yellow and red khiro barrels in the back along w/ red and blue in the front truck of my grizzlies. along with 70mm. zig zags and I still have a bit of bite with 52 degree flipped hangar baseplates.

[karrot]

i run 174 smokies and either 69mm hotspots or 70mil zigzags on my voodoo
with only a thin shock pad
(green stim front, blue stim backs)

no bite

1/8 riser, randals and 83mm flys. no bite

[monkeyhead]

1/8 riser, randals and 83mm flys. no bite

No bite?!...I'll believe it when I see it.
^
(that's what you said when you had dh's and 70mm wheels..)

Do you have wider hangers on there?



Wanna skate Thurs. (Ima be in Nu'uanu on wed.)

[karrot]

no bite .

[Belak4life]

those trucks must be damn tight then^^^
have you tried grizzlies or force c7's loose on your voodoo?

[karrot]

those trucks must be damn tight then^^^
have you tried grizzlies or force c7's loose on your voodoo?

i get wheelbite w/ c7s and 70mm

[Mile_High_Mark]

Covering most of the bases:

Landyachtz Evo deck (dropped)
Bear Grizzly 40/52 trucks (10mm, JimZ bushings)
Seismic Blast Wave 78mm wheels (75a)
Landyachtz sealed 10mm bearings and spacers

Chicago Longboards Epipen deck (dropped/drop-through)
Force C7 trucks (JimZ bushings)
ABEC11 Flywheels 83mm wheels (75a)
Bones Swiss Labyrinth bearings and steel spacers

Rayne Hellcat deck (drop-through)
Crail DH/Speed trucks (red/soft Independent bushings)
Retro BigZig 75mm wheels (lime/80a)
Ceramic bearings and steel spacers

No top-mount yet, but that’ll change eventually.

[skatardude10]

Chicago Longboards Foamcore Topmount
JimZ Speedhangers 200x10 (JimZ Bottoms + Khiro blues, lucky kegs, Randal DHs stacked on top)
83mm Flywheels 78a

Chicago Longboards Topmount (Wood version)
Randal 180s (Blue stims, Moogs, Indy Orange, Lucky Kegs, Randal DH)
76mm 78a GOS

[Anton Milioti]

CLB elanor
83 flys
crails
biltins

S9 race shorter model
Kahalanis
S9 GOS 75a
biltins

[Acer87]

true, but what I'm wondering is how people are able to run loose trucks along with 70 mm wheels without risers.

Im running crail front dh/180 back. Crails + JimZ dont lean much so Im not even close to bite with 70mm and no risers

[worldridr768]

Chicago Longboards Double-D
Kahalani DH trucks
Biltins Abec 7
Split duro Lemon/Lime BigZigs

verr' niiice!

[spikedfro10]

ton, world, how do you guys like those kahalanis?

[bpz]

The Kahalani's are sick. I've always loved surfy trucks with soft bushings - tons of lean and lots of ankle control. I tried JimZ's for a bit and HATED them, trucks with sphericals are not for me at all. I knew the Kahalani's would fit my style. On a top-mounted deck, they're untouchable.

[Abel]

Kebbek Ian Comishin
Randall Dh baseplates with r2 180 mm hangers
Gumballs 75a
Skf bearings
Kahalani reinforcement plates for the trucks.


Next purchase will hopefully be kahalani trucks with either a topmount fibretec or some other topmount.

[worldridr768]

The Kahalanis are absolutely amazing. They are better than I expected. They grip extremely well, and they turn great, while still being stable. No more pancaked bushings. They are an awesome investment if you have the money, and I highly recommend them. Also, the axles are very strong as well.

[VAC]

Nice setups people

I rock this one:
homebuild 40" W camber and feet thingies to lock 'm in.
crails
78a flashies
And a sticker which says I'm a registered organ donor .