your dh setup

[Longbord1]

wow that is a sweet board!!!

i bet you could run that with 83s.

my s9 concave pin can run 83mm flys with crails and i don't get wheelbite in full turn.

[Anonymous]

i bet you could run that with 83s.

It could be possible I suppose but here is a pic of me leaning into 76mm wheels with just a 1/8" shockpad.

[Longbord1]

are the dhs very loose? the wheelwells seem really deep also. thats wierd

[Anonymous]

Yeah, loose up front.

[bpz]

Kebbek Smoothcut
R2 180 hangers with 8mm axles
de-wedged R2 baseplate in front, flipped hanger
flat R1 baseplate in back
76mm 78a S9 Goddess of Speed wheels
Biltin abec 7 bearings

I also have 81a Strikers, 78a Gumballs, and 83mm 75a Flywheels to throw on this guy... still gotta find out which ones work best for my style.

[wuchi]

here is my new speedboard:

deck: custommade wuchi dh deck. (by me)
trucks: pogobaseplates and randal r2 180hangers (front truck wedged 5 dg)
wheels: 3dm avilas 78a (i've ordered pinkgumballs)
bearings: biltins 7's

sorry for the big unsharp pics.

[Longbord1]

freegin awesome. id kill for a board like that!!

[damiche]

lots of nice setups there...
That's what's great about downhill skateboards!

Here's mine:

Kraken Longboards - Ba2wan
Randal Luge trucks with black/blue bushings
Flywheels 83mm 81a (or old Kryptos when needed)
lots of Biltins to make everything roll.

and yeah, I need new leathers....

[longboardertwan]

Heres my new baby as of today when I bought her and said a farewell to my trusty evo....Its a Pocket Pistols hillkiller nondropped with dh plates, 180mm hangers, 83mm 78a flys, bones swiss super 6 (waste of money I always kick myself for although they are nice) and a basement carpet I care nothing about....

[ColinT]

Awesome man killer grip job, any wheels bite issues?

[aaaaaaagh]

there seems to be a trend towards flatter boards.

LETS SEE SOME MORE :P

[RF GURU]

Motion DH Speed- 2006 model
Randal Luge 205mm on 35 baseplates
Flywheel 83mm
Bones Ceramic throughout
Grade 8 kingpins
Khiro Riser pads
Khiro speed washers
Tracker Stims inner bushings
Rear hangar flipped

[Cezar]

Sofo dh board
Randal DH with tracker bushings
Krypto classic 76 mm

yes, im a europeen

[mark grimace]

here is my new speedboard:

deck: custommade wuchi dh deck. (by me)
trucks: pogobaseplates and randal r2 180hangers (front truck wedged 5 dg)
wheels: 3dm avilas 78a (i've ordered pinkgumballs)
bearings: biltins 7's

sorry for the big unsharp pics.

great plates.

[XPLOAD]

DECK: 9LYDE Longboards - Assassin DH - built by me :P
Dimensions: 1070mm x 230mm at the widest point
Wheelbase: 840mm (inner hole to inner hole)
TRUCKS:
Front: Force Response 180mm (R7), flipped hangar, Doh-Doh hard bottom, and independent medium top bushing.
Rear: Force Competition 180mm (C7), flipped hangar, Doh-Doh hard bottom and stock soft force top bushing.
WHEELS: 83mm Cherry Bombs (not sure what duro, either 75a or 78a)
BEARINGS: Bones Reds
HARDWEAR: Khiro soft risers and 1.5" flat mount bolts, custom tape





cheers, ash

[AGENT WD-40]

Right now I have:

Landyachtz Evo
Randal DH trucks
83mm Flywheels
Oust Abec 7

I have been contemplating a drop through board to add to the quiver. Something along the lines of a BRX or maybe a Kebbek Smoothcut. If I do end up buying a drop through it will be set up with Crails, Sector 9 GOS 75a and Swiss Bones. We'll see what happens

[Bushman]

- RAYNE DEMONSEED
- Red CRAIL trucks with yeloow MOOG bearings, and AirCraft grade stainless steel kingpins/nylock nuts
- SKF ceramic bearings with SuperLube DRI-FILM lubricant
- 80MM Blue Kryptos OR 76mm Gumballs, depending on my mood.
-Stainless steel hardware, secured with stainless Nylocks, washers and red loctite

8)

[mark grimace]

- RAYNE DEMONSEED
- Red CRAIL trucks with yeloow MOOG bearings, and AirCraft grade stainless steel kingpins/nylock nuts
- SKF ceramic bearings with SuperLube DRI-FILM lubricant
- 80MM Blue Kryptos OR 76mm Gumballs, depending on my mood.
-Stainless steel hardware, secured with stainless Nylocks, washers and red loctite

8)

well done. I truelly love a board that was so well thought out. The stainless KP is a nice touch.

You got any pics there Bushman?

[Bushman]

i'll have to go down the street and bug AIRIN for the camera...lol!! gimmie a day or two..



my other downhill setup is:

-FLEXDEX pro 41
-R2's
-Gumballs
-BIltins (Dri-Cote lubed)

"oh but the Flexdex is flexy" all the downhillers cry as they wail and gnash thier teeth, "no good for downhill" ...........well, i beg to differ. When I set it up with flipped hangars, move the base plate in a notch (multi drilled holes on the deck), stiffer bushings, it goes like freaking hell down the hill. The "Flexdex" composite materail ABSORBS all the harsh road vibrations and rough pavement, and the bit of flex really makes cornering easy, as it allows the deck to turn and the wheels to grip. I jave taken it up to 80km an hour and it is just as stable as my Demonseed, and more comfortable on the feet (no vibrations transfered thru the deck.)

[longboardm82]

homemade deck, crail dh, 83mm flys, biltin 7's, yellow stims top/blue stims bottom

here are some more pics: http://www.silverfishlongboarding.co...=350281#350281