your dh setup

[leighgriffiths]

BRX

are those just washers you've used to lower the board?
do you think that the bolts might bend if pushed hard? cos my mate is thinking of doing the same thing.

[Bobrules]

man, I wish crails were like 190-200mm

I dont, then theyd never turn...

[boxcar182]

^
Agreed, crails suck at turning as it is.

[Justin K]

^
Agreed, crails suck at turning as it is.

not true, with my crails really tight, i could do a tight hairpin, and a toeside staying on the inside line the whole time, crails are good at turning

[green]

not true, with my crails really tight, i could do a tight hairpin, and a toeside staying on the inside line the whole time, crails are good at turning

ok dervish you have no credibility on the fact that you do not push it nearly as hard as the two guys that said that.

i will third that crails do not turn.

[kyky]

are those just washers you've used to lower the board?
do you think that the bolts might bend if pushed hard? cos my mate is thinking of doing the same thing.

I've had no problems with it and I've been riding it pretty hard.

[circle]

they dont turn unless you have reflex bushings and/or 75a stims.

[N88]

has anyone used bear smokies on a drop through.

[neuros]

has anyone used bear smokies on a drop through.

no, it has never happened, ever. and if you try it, you will cease to exist.

[ConnorH]

no, it has never happened, ever. and if you try it, you will cease to exist.

[RyanTheDagger]

has anyone used bear smokies on a drop through.

I rode a motion dh with smokies dropped through even further with cut up risers, and the bushings were cranked down really hard. Did not feel good at all. The kid that was riding it could not corner worth #### with the trucks like that.

[AJ]

are those just washers you've used to lower the board?
do you think that the bolts might bend if pushed hard? cos my mate is thinking of doing the same thing.

Yeah its really nice. I find it more efficient that rail risers from Khiro.

[circle]

The family DH quiver
(Left to Right)
Reflex 40, Hellcat, BRX
All trucks painted by me.

[NorCal DH]

the best board i have ridden is my reflex 40 with superballs and blue custom painted randal 180's

[Justin K]

I have a question

well i put some randal dh 35* with 180mm hangers, and they fell really turny and leany on it, is that just because i used crails before which had no lean and im not used to the randals?

[NorCal DH]

I have a question

well i put some randal dh 35* with 180mm hangers, and they fell really turny and leany on it, is that just because i used crails before which had no lean and im not used to the randals?

yeah, randals lean a lot even with low degree base plates and crails have no lean at all. you will get used to them and like them way more than crails.

[circle]

what it comes down to is that Randals turn more that Crails, they are both different, but both great as well.

[LandyachtzManiac]

no, it has never happened, ever. and if you try it, you will cease to exist.

HAHHAHAHAHAHAHA I"M GUNNA DO IT!!!! I love you all SFLB!

[BigDaddy101]

Left: Homemade deck
Tracker Six Track
Seismic Blastwave

Right: Landyatchz Chinook
Randal RII 180 flipped
3dm Avilia 75mm

[karrot]