your dh setup

[aaaaaaagh]

Ok so im posting my evo one more time i repainted it and i redid the set up.

9ply evo painted white with cuttlefish graphic
jimz hangers 200mmX8mm
randal dh bases all around
jimz bushings front
trimmed black radikals bottom and green radikals top in back
abec11 pink 77a gummes
greased abec 7 biltins

the board is freaking amazing! locks me into turns so well, great for footbreaking mongo, and corners like a freaking dream! the setup turns based on bushings and not on tension.

my normal randal dh 160s hardly turn at all you must be usin lots of lean and not turn much with 200 mm axles

[Longbord1]

nope they turn great! i like leaning also!

the board feels like a rock but when i need to turn it takes em like a champ. the angles on the evo help a lot!

[Rustyfriend]

i wish it was dry out so i could ride my JimZ's....thats right.........they came in

and they were a pain in the arse to setup....and there is a deadspot in the middle....but only a ride will tell

[aaaaaaagh]

i wish it was dry out so i could ride my JimZ's....thats right.........they came in

and they were a pain in the arse to setup....and there is a deadspot in the middle....but only a ride will tell

please explain

[Longbord1]

also what type of bushings are you running aggghh?

im using 80a fronts and 90a 95a backs

[small hippo1]

Theres no need to run bushing that hard on the back of an evo with 35* geometry. considering the evo makes it like 30*.

[Longbord1]

trust me the back turns very very well

[bpz]

Theres no need to run bushing that hard on the back of an evo with 35* geometry. considering the evo makes it like 30*.

The Evo makes it like 20 degrees

[Partyboypowell]

The 6er mod on that Caften is cooooooooooooooooooooooooooool

[Rustyfriend]

please explain

well i had to wrestle with the pivot cups to get them in and then the bushings don't sit flat in the hangers.....this causes the dead spot.

[Kipper]

6 wheeled evo. i just finished it today.

right now its got R1 base plates all around, but soon to put R11 in the rear for a more responsive ride. its got the DH hangers on
i got 78a and 75a flys in front, and 75a in the rear. some times ill toss on some pink gumballs.
built-in bearings

[HerBDerb]

I'm diggin the 6 pack evo.
Hows it ride?

[Rustyfriend]

was that you that rode it at danger bay with GOS?

and btw....this is my dh setup....pics soon:

Subsonic Reflex 42 with Black fiberglass
JimZ hangers on randal r2/dh baseplates
79a Speed Vents
biltins

[bpz]

Rayne Avenger; the more ridden of the two.


Kebbek Smoothcut

[Kipper]

was that you that rode it at danger bay with GOS?

and btw....this is my dh setup....pics soon:

Subsonic Reflex 42 with Black fiberglass
JimZ hangers on randal r2/dh baseplates
79a Speed Vents
biltins

no that wasnt me. some other dude.

i just finished mine tonight. and my ankle is still in recovery. sooo i need a few more days then ill be bombing #### like no tomorrow! i just did a few passes in front of my house and i NEED the RII in the rear. i doesnt turn AT ALL. but witht the wheels it rolls FOREVER!

[mark grimace]

how its set up rite now:
90 flys in 81a and 78a
randal r2 plates in the back with DH hangers, and randal DH in the front with 180 hanger
buitin bearings (changing for Rockin Rons, dont like the built-ins)
1/2inch clearance between the rear wheels,
randal black and randal blues (barrols) on the back trucks, randal black in the front with a
red bottom.

Ill have the front end extension done soon aswell, and yes it still turns great and i can still take the hairpins. and i can still slide it easily

thats just gnarly!

[Longbord1]

just have to say how fun the 200mm hangers with my pink gummies is great! very very stable, grippy yet very slidable, also as touched on by agggghhh they lean like crazy but still remain stable. The leaning feels so great! i love leaning into my turns and i can just lean and lean and lean!

[stuff]

thats just gnarly!

yah the decks jsut insane, handles so good to, i should have the front end extension done soon... still takes the hairpins



[url]

chuncked a 90 fly today and i cant afford new ones at all, spent all my money on this already and have to pay my dad for my other hobby yet....

hope skinner will let me ride it at COP....

[4-am]

Gnarly Photos Jordon!!

[spikedfro10]

Gnarly Photos Jordon!!

i must agree, rather sick photos bro!