your dh setup

Bantam · 08-14-2005, 06:53 AM

I am so excited to finally be able to post in here!

Homemade Chaput style board currently with no drop through, it is on my to-do list.
Crail DH trucks, black hangars.
78a Gumballs
Bones Reds

I will be putting 83 Flys and Rockets on the board in a few months.

Jax · 08-14-2005, 11:02 AM

Landy DH
Randal DH trucks with Blue Stims
83mm/78a Flywheels
Bones Reds
10mm Spacers
2" hardware
angled risers
shock pads

klems · 08-14-2005, 12:46 PM

Curves' Queen (from Chronic Crew)
Randal Luge with R II 180 embase
Krypto 85mm
Redz

extrem · 08-31-2005, 10:36 AM

fluchcut.
jim-z 217mm
92mm abec
pogo-plates
blue stims
oust 7
jessup grip

mark grimace · 08-31-2005, 02:45 PM

Landy EVO
Crail DH trucks (black)
biltin abec 7 bearings
83mm Flywheels

Crappysurfer · 09-06-2005, 07:04 AM

ahem you are all newbs
loaded fish
seismics
strikers
swiss bsb bearings
and!
grindkings

grand total is a five and a half inch clearence
5 .5 "

Captain Matt · 09-06-2005, 08:48 PM

Motion DH
Crail dh trucks
83mm flys 72a
bones swiss bearings

...ohh it flys

mellowkat · 09-07-2005, 06:07 AM

Hey Matt how do you like the Motion DH? Cool graphic eh!

Captain Matt · 09-07-2005, 08:01 AM

The graphic, its hot like fried rice....
the deck, just the right stiffness soakes up bumps like crazy, i think in a few weeks i might buy a big fish motion puts alotta work into their boards, and they just look so sick

mark grimace · 09-07-2005, 04:05 PM

Quote:

Originally Posted by DeanCore

kahalani downhill, no drop-thru

Randall DH
Gumballs 81a
SKF speedskater

web site?

I think I want one of those....

joker540 · 09-08-2005, 03:39 AM

flush cut
randal dh's (getting jimz hangers soon maybe)
83 78a fly wheels
kihro bushins
rocking rons bearings...... i like the rons better than the swiss and they are a bit cheaper...
i find tho that when i get some really good speed the randals just wont take it, around 70+ km/h they just go CRAZY... so i want to get some of the jimz baseplates and hangers.. i was looking for him at top challenge, but apparently he didnt show

Thaison · 09-08-2005, 03:46 AM

Eh? Jimz's got baseplates now??? I think we need pics. Yes, most definately need pics

joker540 · 09-08-2005, 05:21 AM

the baseplates are super hot... but they are still in prototype stages, my friend dr.paul has a pair that he scored at danger bay.... the top of the baseplate is a big rectangle, and its kind of sharp, he cut himself on them putting them in.... he rides a flush cut and he had to hack away the R1 CNC parts so he could re-flush it.... but over all they are super hot... they sell for 60$ EACH! i really want to get my hands on a pair.. but word is they wont be out for a while

panda · 09-08-2005, 05:30 AM

My setup:

-> Drop through shortened S9 Bomb-Hills
-> Magun Trucks
-> Bones Super Swiss 6
-> Any of: 83mm 81a flys, 76mm 81a flys, 84a gumballs, 84a trimmed avilas

This is way too fast and comfy, it's almost cheating

.

I also ride this on occasion:

-> S9 raceboard
-> Crail DH Trucks
-> 78a gumballs

This setup carves at any speed and stays really stable, i love it.

*SWEET* · 09-08-2005, 05:44 AM

-Landy Evo 11plys
-Randal Comp 170
-Kriptos 85mm
-Bones Super Swiss 6

As soon as I arrive in Seattle I'll buy:
-Dregs SpeedRace
-JimZ Speedhangers with R1 Baseplates
-Kriptos 85mm
-Bones Super Swiss 6

Can't wait to ride such a different setup from what I have

joker540 · 09-08-2005, 05:54 AM

*sweet* have you ridden the dregs speed board? what do you think of it??
and the kyrps i dunno, i really like my flys and strikers... but i only use the strikers for garage racing.... i heard somebody say about the flys... grip grip grip WOAH... i really have noticed that the flys are super sticky... i have 78A but they are starting to cone fast.... is it possible to flip them around.. cause they are center set... or is that a no no?

panda · 09-08-2005, 06:30 AM

flip them all you want, but do it often the negative cone can be surprising at first.

as for sweet, sweet setup you're planning on.

*SWEET* · 09-08-2005, 06:57 AM

Quote:

Originally Posted by joker540

*sweet* have you ridden the dregs speed board? what do you think of it??
and the kyrps i dunno, i really like my flys and strikers... but i only use the strikers for garage racing.... i heard somebody say about the flys... grip grip grip WOAH...

Never really tried it no...
I quickly tried Danny Connor's S9 Race which is almost the same one but that's all...
Ask Panda for that... he owns the S9 Race.

Concerning the Flys...well... It was me

I tried them when I was in SF and it was really strange for me to ride it...
A friend of mine told me that it took him 1 month to really get use to it...
But I'll test them more seriously in a few months

Rustyfriend · 09-08-2005, 12:22 PM

i saw those jimz baseplates at Munnsville, you could really tell there aren't ready for consumers yet because all the edges were sharp and they were very "block'ish" but the main focus i am guessing is on the angles and stuff, not the finish

Eric Clopton · 09-14-2005, 03:18 AM

Landy DH Race
180mm randals
reds bearing
77mm 84a strikers
coustom "flame" job