your dh setup

[wardlarson]

to bootrape: my name is not wood

[savage2424]

My new demonseed and my nemesis.
Demonseed is setup with 42 degrees plates with paris hanger, venoms, and big zigs.
Nemesis is setup with 42 randals, bigzigs, and jimz bushings

I get mad railbite on my demonseed, any ideas how to make it better? bigger wheels?

SWOLLEN MEMBERS FTW

[jshalvorsen]

thihi*giggles like a girl*

Anyone getting any lower on a topmount? No? Didn't think so

DH36, Kahalanis(93a/90a back, 90a/85a front), EW Road Rages.

Edit: Guess it's not the lowest topmount after all. But thats what silverfish is for We learn something everyday!

[Ferrarimk13]

thihi*giggles like a girl*

Anyone getting any lower on a topmount? No? Didn't think so

DH36, Kahalanis(93a/90a back, 90a/85a front), EW Road Rages.

sweet setup, how far from the ground is it? maybe some 666 trucks? that would be low.

[sharkbait7]

My new demonseed and my nemesis.
Demonseed is setup with 42 degrees plates with paris hanger, venoms, and big zigs.
Nemesis is setup with 42 randals, bigzigs, and jimz bushings

I get mad railbite on my demonseed, any ideas how to make it better? bigger wheels?

run 50* paris plates

[olilem]

go faster
crails under 25 or 30 are ####
over that, they are awesome

i rode my crails up to 43 mph with the stock bushings, and they felt twitchy to me.
Which is why i played around with bushings laying around. I don't know if it is any good in theory, but it felt a lot better!

[jshalvorsen]

sweet setup, how far from the ground is it? maybe some 666 trucks? that would be low.

The standingplatform is exactly 3.5" off the ground(in the bottom of the concave). Yeah, guess the same board would be a little lower with 666 trucks, but I've never seen them compared to a kaha, so dunno..

[xedell]

The standingplatform is exactly 3.5" off the ground(in the bottom of the concave). Yeah, guess the same board would be a little lower with 666 trucks, but I've never seen them compared to a kaha, so dunno..

im getting the same height with some modded fastracks/bears and a wood deck (with 1/8" riser) so it would be lower on an alu deck. My 666's would probably be the same height also ( i don't have them setup yet). So yes I could be getting lower on a topmount haha. But you have a super sick setup

P.S. as you can probably tell I REALLY like low trucks

[jshalvorsen]

im getting the same height with some modded fastracks/bears and a wood deck (with 1/8" riser) so it would be lower on an alu deck. My 666's would probably be the same height also ( i don't have them setup yet). So yes I could be getting lower on a topmount haha. But you have a super sick setup

P.S. as you can probably tell I REALLY like low trucks

On a wood deck with fastracks/bears.. this I have to see.. pics

[Rayman75MM]

On a wood deck with fastracks/bears.. this I have to see.. pics

I agree, pictures or it didnt happen =P

[wardlarson]

i was at around 3.5-4" with my widowmaker, 42randals and 4presidents
i had my rumrunner at around 2.5" for a little while

[xedell]

here are the pics






as you can see the baseplate is drilled twice and my measurements were from the top of the deck right above the trucks not the dropped platform (this is my only dh deck for the time being, i usually run topmounts)

[NickCrotch]

cool mod! but thats a drop deck not a topmount.

[swisschez]

thats awesome

[jshalvorsen]

as you can see the baseplate is drilled twice and my measurements were from the top of the deck right above the trucks not the dropped platform (this is my only dh deck for the time being, i usually run topmounts)

That looks like a low truck indeed. But will it turn anything at all?

[Brain Smoothie]

cool mod! but thats a drop deck not a topmount.

"my measurements were from the top of the deck right above the trucks not the dropped platform (this is my only dh deck for the time being, i usually run topmounts)"
reading ftw!

[xedell]

cool mod! but thats a drop deck not a topmount.

i know but its the only dh deck i have and soon they will be on a topmount (i really don't like dropped decks but this was my first dh deck so its what i have as i have traded away my other one as i wait for 3 topmounts coming my way!)

[streetheap]

That looks like a low truck indeed. But will it turn anything at all?

That's what I was wondering.......

[xedell]

That looks like a low truck indeed. But will it turn anything at all?

it really turns well since i have the stock fastrack bushing as a bottom and a 81a venom as the top and my front truck is a gullwing charger (to balance out the rake) with a stock cone and a 81a venomcone.

[CarlTheSmokingCrab]

to bootrape: my name is not wood

mah bad.

jshalvorsen, i can't say enough how sexy that board is!!