your dh setup

[Ferrarimk13]

originals are f'in low too, with a 3/4 inch riser, its the same height as my topmounted crails (with no riser) You will get wheelbite, but its crazy low.

[jshalvorsen]

it really turns well since i have the stock fastrack bushing as a bottom and a 81a venom as the top and my front truck is a gullwing charger (to balance out the rake) with a stock cone and a 81a venomcone.

So your setup will only be this low in the back of a board(unless you ride two of these modded trucks on a topmount, but then again you will not have the charger as a steering front). Sounds a bit funky, but I've never tried one so if you like it then it's definately what you should ride on Was really interesting to see that the combo(fastrack+bear) became so low!

[streetheap]

originals are f'in low too, with a 3/4 inch riser, its the same height as my topmounted crails (with no riser) You will get wheelbite, but its crazy low.

You've tainted this thread with talk of those trucks.

[fluke]

Landy Evo
Randal RII trucks, 35* front, 50* rear plates, 180mm hangers, flipped
Venom DH bushings, red front, green rear
Lime Big Zigs w/ Bones Reds

and pie..

[Ferrarimk13]

You've tainted this thread with talk of those trucks.

it wasnt me! Err, i mean wrong thread?

[xedell]

So your setup will only be this low in the back of a board(unless you ride two of these modded trucks on a topmount, but then again you will not have the charger as a steering front). Sounds a bit funky, but I've never tried one so if you like it then it's definately what you should ride on Was really interesting to see that the combo(fastrack+bear) became so low!

i might get another plate (52* bear) redrilled (by karrot who did the first ones, GO JOHN WOOOT)for the front but i have not run these trucks flat yet so i don't know how they will turn (they will be on a board with wheelbases from 27" to 30" so i will be able to make a lot of adjustments)

[olilem]

adjustments are good

[XPLOAD]

Glyde topmount, 200mm kookys, speedvents, go fast board.
Glyde dropthrough, 180mm kooky hangers, force plates, s9 goddess wheels, screwing around. its a super fun setup

[olilem]

Glyde topmount, 200mm kookys, speedvents, go fast board.
Glyde dropthrough, 180mm kooky hangers, force plates, s9 goddess wheels, screwing around. its a super fun setup

those are just so hot

[JustinS]

Glyde topmount, 200mm kookys, speedvents, go fast board.
Glyde dropthrough, 180mm kooky hangers, force plates, s9 goddess wheels, screwing around. its a super fun setup

OOOO MY GOODNESS!. those are some amazing looking. boards. What aare the prices of both boards? im really interested.

[budds51]

and pie..

LOL i was looking at the picture before reading and i was like "WTF?!"

[Petary791]

Here's what I'm thinking.

Dopamine Boxcar 40", Independent 215's with JimZ bottoms and Indy bottoms, and S9 69mm 82A Race Formulas.

Now I just need to order it...

[nightskateboards]

that would be helllllla sick petary

[XPLOAD]

OOOO MY GOODNESS!. those are some amazing looking. boards. What aare the prices of both boards? im really interested.

we have done some custom boards, but we are currently holding off on any production of anything until later this year. we are still working out more efficient way to make the decks.

[Crappysurfer]

xpload, your boards are some of the finest designed and also best crafted ive seen, i wish i could afford one but instead i'll give you 21 rep

[Alpha06]

For sure, XPLOAD makes some of the most beautiful, awesome decks. Its an abolute pleasure to ride them, I can't stress this enough.

[Snow]

we have done some custom boards, but we are currently holding off on any production of anything until later this year. we are still working out more efficient way to make the decks.

Lucky I got my order in a bit ago

[Shiyuchi]

[swisschez]

flipped 666 eh?...that must be interesting

[goldfishofhate]

more like flipped 666 on a 0* baseplate.... weird