your dh setup

[Metalhead8290]

no. he is using the DH plate in the front b/c of the extreme Wedge of the evos nose. and an r2 plate in the back b/c of the extreme dewedge of the tail. This kind of makes them more or less the same angle...or closer.


Edit: Yea what he said ^^^^^ same thing.

[Belak4life]

no. he is using the DH plate in the front b/c of the extreme Wedge of the evos nose. and an r2 plate in the back b/c of the extreme dewedge of the tail. This kind of makes them more or less the same angle...or closer.


Edit: Yea what he said ^^^^^ same thing.

oh I forgot he was using an evo with a wedged nose.

[[ben]]

Subsonic Reflex 42
Randal RII 180mm
JimZ Stims
ABEC11 Flywheels (83mm/78a)
Bones Reds
MHS 10mm spacers, axle nuts are cranked down tight!

[Rustyfriend]

woot! very nice lookin!

[svendy]

Landy Evo
Smokies
Jimz Bushings white/black
85mm speed vents white/red
Sin Ceramics

[Wabe]

I really love that stain ben!

[[ben]]

woot! very nice lookin!

Yeah, it was pretty beat up after I ran 72mm Powerballs on it for a couple months...
Scott refinished the bottom for a mere $20.

[Wabe]

Did the bottom scrape the ground a bunch?

[[ben]]

Did the bottom scrape the ground a bunch?

The bottom would drag on almost anything.
I'm never going with wheels smaller than 80mm on this deck again...

[Rustyfriend]

really? i ran mine with 35* plates which sit lower and had no problems with 77mm

[bpz]

Landyachtz Drop Wedge
Pogo baseplates
Holey hanger in front with 70mm 80a ZigZags
R2 180 hanger in back with 4 x 70mm 75a Flashbacks
Biltins all around, Radikal/Randal/Khiro bushings, flat washers, etc.

[revelation2]

Brian, what a perfect way to make your 5000th post. That entire setup makes me drool.

[[ben]]

Landyachtz Drop Wedge
Pogo baseplates
Holey hanger in front with 70mm 80a ZigZags
R2 180 hanger in back with 4 x 70mm 75a Flashbacks
Biltins all around, Radikal/Randal/Khiro bushings, flat washers, etc.

Holy ####.
Why not drop the Pogos through?

[Rabid Skunk]

Holy ####.
Why not drop the Pogos through?

Do you know how pogos are supposed to be set up? I'll give you a clue, it's not dropped through.

[[ben]]

Do you know how pogos are supposed to be set up? I'll give you a clue, it's not dropped through.

I honestly don't care how they are "supposed" to be set up.
I like a low ride and thought it'd be cool to see Pogos dropped through, and I figured no one would be an ass about that comment. Guess I was wrong.

[bpz]

Well, if you like your trucks to not work because the hanger would basically have to be embedded into the deck itself, then sure - drop through some Pogo's!

[Longbord1]

I honestly don't care how they are "supposed" to be set up.
I like a low ride and thought it'd be cool to see Pogos dropped through, and I figured no one would be an ass about that comment. Guess I was wrong.

You obviously don't know Alex

[Rabid Skunk]

Oh come on, I gave him a clue. How much of an ass could I be?

[pirateswin]

Totally, wouldn't there be a better truck/deck interface if not just the baseplate went through it, but the hangars as well? Genious!

[Basch]

flip the basplates over so they are dropped trough from above. Attach hanger. Big wheels and ride the thing with the trucks upside down.