your dh setup

[NorCal DH]

RB DH 36
42* Talon Front
35* Randal Rear
Pink SickSicks

[streetheap]

less talking

Ton, did you put the Jimz delrin pivot tube in your randal plates, or is that a nylon washer?

[Anton Milioti]

Ton, did you put the Jimz delrin pivot tube in your randal plates, or is that a nylon washer?

Thats the Delrin Pivot tube. it has been beveled at the end so it fits in nicer.

Haven't spent much time on these trucks, but from what i have gathered so far, these are my favorite trucks to date.

[Justin K]

Thats the Delrin Pivot tube. it has been beveled at the end so it fits in nicer.

Haven't spent much time on these trucks, but from what i have gathered so far, these are my favorite trucks to date.

i wonder who trucks they were first.....

[Anton Milioti]

i wonder who trucks they were first.....

YouTube - DERVISHRIDER1 ROLLED!

[streetheap]

Thats the Delrin Pivot tube. it has been beveled at the end so it fits in nicer.

Haven't spent much time on these trucks, but from what i have gathered so far, these are my favorite trucks to date.

I see....
I've had my Jimz for about a month, and totally agree. At first I thought the spherical was a little weird feeling, but once I got used to, it all was good.

[Belak4life]

Thats the Delrin Pivot tube. it has been beveled at the end so it fits in nicer.

Haven't spent much time on these trucks, but from what i have gathered so far, these are my favorite trucks to date.

How are they on your 42 plates...leany much?

[omeri]

Budds- how is that even possible? it's the exact opposite for me

[nikchaing]

mine

[Shiyuchi]

Hey ton, would just sanding the tube a bit shorter work also?

[jman1365]

Budds- how is that even possible? it's the exact opposite for me

agreed that flipping the hanger increases wheelbite, due to the fact that it brings the axle closer to the deck

[Xgecko]

agreed that flipping the hanger increases wheelbite, due to the fact that it brings the axle closer to the deck

an ugly thing even at low speed....and embarrassing too

[budds51]

Budds- how is that even possible? it's the exact opposite for me

well i havent gotten wheelbite, i wasnt even thinking of that because im riding my randals on a Nemesis.

and i have my sh!t kranked down pretty good, and its still turny, just not sloppy turny to the point where it feels like you arent turning as much as the lean. if any of that makes sense lol

[Petary791]

Just set my board up, so sick. Comet Voodoo, Independent 215's with a mixture of JimZ and Bones Hardcore bushings, and Earthwing Road Rages. It's lower than my Mosquito!

[Anton Milioti]

How are they on your 42 plates...leany much?

my friend has my 35 degree plates and i am waiting for him to give them back to me so i can throw my JimZs on there, but they seem really nice so far on the 42s. you just think about turning and they go

Hey ton, would just sanding the tube a bit shorter work also?

not sure, when i bought the trucks, the pivot cup was already sanded to fit Randal Style plates.

[streetheap]

Just set my board up, so sick. Comet Voodoo, Independent 215's with a mixture of JimZ and Bones Hardcore bushings, and Earthwing Road Rages. It's lower than my Mosquito!

That sounds like my kind of topmount setup, Petary.
To all you guys talking about flipping your Paris hangers:
IME, flipping them can actually make your board feel more tippy and less turny, because it flattens (sucking it "up" into the board) out the roll axis a bit. And yes, because the seat on one side is deeper, and the axle moves round to the back. I think it feels wack on a topmount, but better on a dropped board, or even a drop-thru.

[Metalhead8290]

DSC09907.jpg

50* randals
70mm tangs

[sharkbait7]

[Rayman75MM]

quit nubbin it up jon

[swisschez]

sooo thats why they were in the hallway...

...atta'boy