your dh setup

[nsc1120]

How about, blue/blue front, and green/blue back?

I weigh 120 pound and I run red/red in front and blue/red in back on my voodoo with crails so that might work but I would say go even softer

[monkeyhead]

Cosmicase try a red, red front, blue green back.

[Eddy Martinez]

Here are my DH set ups. The Subsonic Swift 42 Swift was very impressive, it reminded me of a dolphin hauling ass in front of a boat. Very comfortable runs. Great work Scott. Your Amigo Eddy Texas Oultaws/ Pavel Skates.

[blink2wice]

Landyachtz Drop Wedge
Pogo baseplates
Holey hanger in front with 70mm 80a ZigZags
R2 180 hanger in back with 4 x 70mm 75a Flashbacks
Biltins all around, Radikal/Randal/Khiro bushings, flat washers, etc.

how did u get the four wheels in the rear hanger?

[bpz]

how did u get the four wheels in the rear hanger?

Liek MAJIK D00D!11

[spikedfro10]

replaced the axle in the rear hanger, and then put double flashbacks on with speedrings in between.....

[Belak4life]

Landyachtz Drop Wedge
Pogo baseplates
Holey hanger in front with 70mm 80a ZigZags
R2 180 hanger in back with 4 x 70mm 75a Flashbacks
Biltins all around, Radikal/Randal/Khiro bushings, flat washers, etc.

I remeber you used pogo baseplates in your earlier setup with the Avenger that's a topmount. I noticed that there's a the bottom of the baseplate is not flat but has a little "hump or step". SO how are you able to fit those baseplates on your topmount avenger?!!

[K-Rimes]

I remeber you used pogo baseplates in your earlier setup with the Avenger that's a topmount. I noticed that there's a the bottom of the baseplate is not flat but has a little "hump or step". SO how are you able to fit those baseplates on your topmount avenger?!!

With rails.

[bpz]

With rails.

aka cut up 1/2" soft risers. Even with the risers on the Avenger, the board rode lower than with Randal baseplates + no riser.

[Belak4life]

Thanks for you feedback K-rimes and Sofa King...Now I know im able to use pogos on topmounts.

[bpz]

Kind of defeats the purpose of Pogo plates in the first place, though... they definitely ride better if you have them dropped into the deck. Pick up some JimZ plates if you're looking for a CNC'ed baseplate for a top mounted deck.

[XPLOAD]

Thanks for you feedback K-rimes and Sofa King...Now I know im able to use pogos on topmounts.

you could always just rout a channel in the deck. its not to hard. just a router and a steady hand

[Belak4life]

Kind of defeats the purpose of Pogo plates in the first place, though... they definitely ride better if you have them dropped into the deck. Pick up some JimZ plates if you're looking for a CNC'ed baseplate for a top mounted deck.

Do u think if u modded an avenger for drop thru purposes, would it work well with baseplates or be to low?

[bpz]

Avenger - pogos baseplate + wheels???

Read that thread. I agree with revzack, it'd be way too low.

[Belak4life]

Thanks it probably be way to low even with risers.

[PuppY_K1ck3R]

Landyachtz EVO
Randy 160's
Swiss bones
76mm Fly's

Big Red X
Randy 160's
Swiss 6 Ball
76mm Fly's

Next week im getting my Carbon evo
with (undecided) Smokey grizzly or Randy 160
97mm Flys

[Wabe]

^^Wow your going to buy a 650 dollar setup^^? Sounds like a great idea. And Belak I don't know why you are thinking of getting pogos when you don't even have a longboard yet.

[bpz]

And Belak I don't know why you are thinking of getting pogos when you don't even have a longboard yet.

That made me laugh, thank you

[[ben]]

Gotta say, that made me chuckle a bit as well...

[Wabe]

Thank you. I am trying to convince him to maybe get one of those kracked skulls boards for real cheap but he ain't old enought to get a job yet. One question for ben, are they still making new episodes for aqua teen? I haven't seen that show in ahwile, but i really don't watch t.v. that much anyway.

Edit: is my avatar working? It isn't showing up on my computer.