your dh setup

**MongoJ** · 03-25-2009 10:19 PM

No Pictures but....

Hellcat '07
Smokies 174mm
Jimz white bushings front and back
10 mm unknown bearings
Monster Hawgs 82a.76mm

**phil6x** · 03-25-2009 10:40 PM

Originally Posted by MongoJ

No Pictures but....

Hellcat '07
Smokies 174mm
Jimz white bushings front and back
10 mm unknown bearings
Monster Hawgs 82a.76mm

pics or it didnt happen....
jk
nice setup!

**circle** · 03-26-2009 06:09 PM

Rayne Nemesis
JimZ Baseplates
Talon Hangars
Freerides, Zigs, RFs, etc.

**mark grimace** · 03-26-2009 06:19 PM

Revenger
Grombiz trucks and wheels (rock_on!)

THESE TRUCKS ARE FUN!!!

**stuff** · 03-26-2009 06:29 PM

Originally Posted by ~Nick~

Lots of them at pipe? I'm going to pick one up.

We have 8 left

**SpeedFiend** · 03-26-2009 06:33 PM

thats pimp

**Rayman75MM** · 03-26-2009 06:41 PM

That nemesis looks sooo tasty

**gabriel[abc]** · 03-26-2009 07:30 PM

Originally Posted by mark grimace

Revenger
Grombiz trucks and wheels (rock_on!)

THESE TRUCKS ARE FUN!!!

do the axles feel weak? they look like it

**nick** · 03-26-2009 07:37 PM

Do the arms on GromBiz trucks pivot independently, or does the entire 'hangar' move together?

**Colton** · 03-26-2009 07:55 PM

grombiz trucks do NOT feel weak. theyre some of the strongest feeling trucks ive ridden

**Ferrarimk13** · 03-26-2009 08:06 PM

how low are grombiz trucks? regular height, lower, or taller?

**streetheap** · 03-26-2009 08:10 PM

Originally Posted by circle

How's that thang ride, Mister?

**circle** · 03-26-2009 08:48 PM

Great.

The delrin makes it so smooth! Thanks for the NorCal thing too! haha

Anyways, The only way that i can
get the kingpin through the baseplate
and the hangar is by bashing it through
with a hammer. After it is through, I cant
take the hangar off without removing the whole
truck from the deck and bashing the kingpin out the
opposite way it came in.

Can someone help me or know why this is and how I can fix it?

Thanks

**$tauberC** · 03-26-2009 08:57 PM

Set up about 2 days ago:

Landyachtz Top Speed
210mm 35/35 Talons
Green Radikal bottom, Green Venom barrel top
Biltins
Lime ZigZags

**streetheap** · 03-26-2009 09:09 PM

Originally Posted by circle

Great.

The delrin makes it so smooth! Thanks for the NorCal thing too! haha

Anyways, The only way that i can
get the kingpin through the baseplate
and the hangar is by bashing it through
with a hammer. After it is through, I cant
take the hangar off without removing the whole
truck from the deck and bashing the kingpin out the
opposite way it came in.

Can someone help me or know why this is and how I can fix it?

Thanks

The delrin tube coupled with the pivot on your Rads, not to mention a pretty tight tolerance....it's pretty much the way you gotta do it. A ball-end pivot would fix that. Don't know if anyone makes those for Rads though....

It's the way you gotta do it with Jimz hangers as well, (with most boards/BPs) unless you have a special ball-end pivot. Kind of a pain, but the smooth turning is worth it.

**circle** · 03-26-2009 09:16 PM

Originally Posted by streetheap

The delrin tube coupled with the pivot on your Rads, not to mention a pretty tight tolerance....it's pretty much the way you gotta do it. A ball-end pivot would fix that. Don't know if anyone makes those for Rads though....

It's the way you gotta do it with Jimz hangers as well, (with most boards/BPs) unless you have a special ball-end pivot. Kind of a pain, but the smooth turning is worth it.

Is that how precision plates + precision hangars usually are?

Darn.

I usually ride my DH setup everywhere and use it for everything, switching out the bushings all the time.

The talon pivots are in no way removable either, so i don't think i could get any ball pivots either.

**streetheap** · 03-26-2009 09:33 PM

Originally Posted by circle

Is that how precision plates + precision hangars usually are?

Darn.

I usually ride my DH setup everywhere and use it for everything, switching out the bushings all the time.

The talon pivots are in no way removable either, so i don't think i could get any ball pivots either.

I see your problem.
I'm not sure about all precisions.....I just know with a hard cup, bushing changes can be a pain. You could drill a hole through your deck so you could pop the kingpin through....

It's gonna be different for different baseplates, though. As long as you stick with the Jimz...someone else may have better advice, I don't know. That's all I got.

The only other thing I could see would be to put a spherical in the pivot, if you're into doing that.

**~Nick~** · 03-26-2009 11:22 PM

Originally Posted by nick

Do the arms on GromBiz trucks pivot independently, or does the entire 'hangar' move together?

Entire 'hangar' moves together. Sick setup's Circle and Mark.

**phan226** · 03-28-2009 01:12 PM

sick setup circle

**jaxxstatic** · 03-28-2009 01:36 PM

Originally Posted by circle

Great.

The delrin makes it so smooth! Thanks for the NorCal thing too! haha

Anyways, The only way that i can
get the kingpin through the baseplate
and the hangar is by bashing it through
with a hammer. After it is through, I cant
take the hangar off without removing the whole
truck from the deck and bashing the kingpin out the
opposite way it came in.

Can someone help me or know why this is and how I can fix it?

Thanks

I didn't have any problem with that with those exact baseplates and another pair of talon hangers. It may be that you have to get the bottom bushing height exact, since there's a spherical.