your dh setup

[Xgecko]

Crails will require some sanding/ filing to fit the DW.
....its worth it tho.
I liked Tracker Fastracks in there too.

yeah but it's a TOP Wedge

[leadfoot]

oooops! Maybe I should learn to read!
Wont top mounted Crails be fairly tall then?

[SoFlo]

40*bears or 42* randals would work well on that board. Change the stock bushings and you have a board that can carve a hill or bomb a mountain.

I'd suggest getting 42 randals or crails all around my friend. Maybe grab some 90-93a venom elims/barrels and you'd be set!

I was thinking about 42* randals. I've never ridden any other truck so don't know much about Crails or Bears.

[JY Jelly]

Crails topmounted arent that bad actually.

[Rouleau]

oooops! Maybe I should learn to read!
Wont top mounted Crails be fairly tall then?

Are crails really that mush taller than randals? (I know the 42's are the lowest but will it be that big of a difference?

Btw what degree baseplate do crails have?

[JY Jelly]

Crails are 45 degree, they are taller than 42s but lower than 50s.

[leadfoot]

I love Crails!
Didnt know they were lower than 50 degree Randals tho'. I kinda thought they were the tallest of the cast trucks.

I think there is something about the geometry that is simple and effective. 45 degrees and symetrical hanger.
I can get a decent carve out of these trucks when loose, but they feel very stable when tightened up a bit too.

edit: way-hey!! post # 3333!! Thats good luck!!
quick.....somebody rub my belly!!

[thedragun]

I thought crails were meant to be topmounted.

[bboomgaard]

I don't know how that balsa proto rumrunner from Roggs got ignored for a good ten posts, but that is exciting, not to mention beautiful.

[Cheers]

roggs balscore rumrunner proto
paris 180
lemon freerides

wut do those cost? even if it is a proto...

[omeri]

gayyy

[wardlarson]

ouch, whats the story omeri?

[omeri]

Truthfully, i have no idea, i had a few friends over this past wekeend and i let them all ride my boards and they crashed this one once or twice. So im guessing one of them did it. But at the same time it doesnt really make sense b/c the crails shouldve held up to such small crashes. The only thing i can think of is that one of them crashed it really badly when i wasnt looking.

[wardlarson]

dang dude
well email crail see what they will do about a replacement
or depending on where you got it, the vendor.

[leadfoot]

[wooden]

comet xl voodoo, 190mm smokeys, purptang 4pres. and a failed tetris grip job that was fun to do anyway.

[snobord]

wut do those cost? even if it is a proto...

that was 200, but the production model is around 350
he also makes a cf version for 200

[meercat123]

What? you have the board too, why do you want mine?

its not because i want yours. its because ur is so gay and was so sweeet before...hahahah

[Anton Milioti]

Rayne Avenger
Randals, super loose.
Wheels.

[stringtheory]

gayyy

Looks run over.