your dh setup

[SpeedFiend]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^
They are my favorite Fly.

[Dr Bob]

On nice concrete 76mm Flys are very nice but on rough pavement they run a bit hard.

[nick]

This morning I've been tinkering with my smokeys on my evo and, in comparison to my hairpins, the evo wins!

-Evo (11ply, with rails)
-Bear Smokeys, black Jimz bushings
-83mm 75a flywheels
-1/2 inch risers
-De-wedged the front and wedged the back a tad

I love it.

[Shimotakimas]

haha i love the monopoly money. thats so sick. howd you get that print on there?

[karrot]

thats one sick looking evo

[nick]

haha i love the monopoly money. thats so sick. howd you get that print on there?

money + gluestick + clear-coat

[Eddy Martinez]

Sector Nine, Randal 150, Indy 169, PurpleSkunk Avilas
PPS DropThrough, Randal 180s, BigZigs
DemonSeed, Pogo Baseplates, Fux Trux, Seismic 85
Subsonic Swift, Randal DHs, Seismic 85
Dregs Alpine, Grizzlies, SpeedVents
And Gumby just imformed me that my BigZigs are backwards. Dude you got a skate tool.

[stuff]

Evo set up with 90mm flys and smokey trucks. i put on 1/2 inch risers on after the pics so i could loosen up the trucks a bit more

i took it down the parkade and realy enjoyed it, learned to standup completely soooooo much fun. but its still realy sketchy riding with a cast.... cant put my hand down at all.

cant wait to get this cast off....i find out how long it is that i have it on, on the 29th.... 5 more months if its bad and need surgery, 3 more weeks if its good....

notice how my front truck is wider......

[bpz]

DemonSeed, Pogo Baseplates, Fux Trux, Seismic 85

How low does that baby ride?

[~Stuart~]

notice how my front truck is wider......

wider eh? how did you manage that?

i want a 200mm smokie

[AJ]

wider eh? how did you manage that?

i want a 200mm smokie

So just specify that you want 200mm hangers, Dr Bob, a Montreal rider, got that as a special order...just call tom or Mike

[king edward]

Grip tape looking a little dirty with the mud and blood stains.

[Eddy Martinez]

The Demon Seed rides very smoothly, no clatter or twitchiness on the 180 Fuks, my friend Gumby was so impressed with the set up, he and I ordered some more Fuks from Wax yesterday. I planning to take this baby out for a very fast ride this weekend.

Your Amigo

[SpeedFiend]

^^^^^^^^^^^^^^^^^^
nice trucks

[Circa]

So just specify that you want 200mm hangers, Dr Bob, a Montreal rider, got that as a special order...just call tom or Mike

F**K! I didn't know they were doing 200mm versions. I have the standard 174 hanger, I would've loved to have had 200mm.

[confusious]

so i decided to change things up a bit, i gave skatardude the proto confederate trucks off my board last weekend, so i decided to try out the bear grizzlies.

new setup....
short wb s9race
modified bear grizzlies
upgraded grade8 kingpins,
changed the pivot cup, to a piece of 3/4 od 1/2 id fiber reinforced tubing
milled out part of the hanger so that stim shaped bushings do not push the hangers out of alignment, i tried it with my jimz's last weekend and things got ugly
tracker green superball bottom bushings
tracker green stim front top bushing, blue stim rear top bushing
radiused edge split duro abec11 bigzigs, i found that riding them on a topmount they are very unpredictable in the corners, so i decided to radius the edges and it made a world of difference, these are the best wheels ive ever ridden....

ill post picks when i get home...

[Dr Bob]

F**K! I didn't know they were doing 200mm versions. I have the standard 174 hanger, I would've loved to have had 200mm.

They are not doing a 200mm version... If you ask them and are ready to pay a few extra dollars, they can do it for you.

[confusious]

[Metalhead8290]

wow. are thoes lathed bigzigs? Pretty Sweet...

[Dr Bob]

Aren't you afraid of killing your top bushing with this rounded washer???