your dh setup

**JamieReis** · 10-08-2009 09:28 PM

Originally Posted by xjweezyx

k thanks but would it change if i said i was 98 lb? im not looking at the duros right now so i dont know what they are off the top of my head. also the holes dont exactly align you can see in one of the pics there are only 2 screws and on the other side 3. i think im gonna drill the other hole pattern on it but if someone had a better idea that would help.

They should fit fine. Try to make sure you put all the hardware through both the deck and the truck before you tighten anything down. And get all of the nuts close to being tight before cranking any of them. Yes, the bushing selection would definitely change...

I'd go blue barrels all around.

**krow** · 10-08-2009 10:16 PM

Originally Posted by Georgie808

I put my feet in my shoes

so im not the only one!!

**Eddy Martinez** · 10-09-2009 02:45 PM

Landyachtz Dually, Radikal Talons, Sector Nine RF's. She is a killer board. Your Amigo Eddy Texas Outlaws.

**stephen.mhsrider** · 10-09-2009 03:15 PM

You must spread some Reputation around before giving it to Eddy Martinez again.

sick setup eddy! never seen that setup combination before, looks like fun

**Doors** · 10-09-2009 04:16 PM

too bad my foots broken, gonna be a lot of fun

**Largeboarder** · 10-09-2009 04:17 PM

Nice board, amigo!

I've been wanting a pair of Talons myself, must rock with some RFs.

**krow** · 10-09-2009 09:48 PM

**Georgie808** · 10-09-2009 10:19 PM

Originally Posted by krow

Holy ####, you beast.

**FlamingLongboarder** · 10-09-2009 10:32 PM

Originally Posted by krow

That looks like the spike near the bushing seat could be an issue with reflectors and stuff.

**jaxxstatic** · 10-09-2009 11:45 PM

**B Dollar Bill Symbol** · 10-09-2009 11:47 PM

Originally Posted by jaxxstatic

Not joking....
09 Avenger
MHS Hybrid Indy 169s
Fat Frees

That sounds... slidey!

**gabriel[abc]** · 10-09-2009 11:48 PM

Originally Posted by jaxxstatic

Not joking....
09 Avenger
MHS Hybrid Indy 169s
Fat Frees

seriously jaxx? wow. did not expect that from you. hybrid indys dont cost over 300 lol

**jaxxstatic** · 10-10-2009 12:05 AM

I took my Corchia with the same setup up to around 35 carving and whatnot and felt really comfortable, so I thought it'd probably be even more fun on an actual dh board. It is.

**jessse** · 10-10-2009 12:17 AM

Originally Posted by krow

What re these trucks called???

**krow** · 10-10-2009 12:19 AM

Originally Posted by jessse

What re these trucks called???

Santoro's

**jaxxstatic** · 10-10-2009 07:44 AM

Originally Posted by B-$

That sounds... slidey!

Oh, it is. Turn is very directional...little lean with the hard bushings, but the narrow hangers let it turn quicker.
The pivot cups are slammed into nothingness from being on my slide setup, so it's pretty sketchy---but that's the new SF fad, right? "Jank"
(for the dense, the above is sarcasm) I'd switch out the pivot cups, but the skate shops here don't have any
Sketch is fun. The slidey fat frees make checks/predrifts easy enough to bust out reflexive "poop-my-pants-slides" (almost hit a rock wall--the Japanese love to place 3-5 manhole covers right next to each other that stick up about an inch above the ground)

**dozer jr** · 10-10-2009 08:10 AM

Originally Posted by jaxxstatic

indys on avenger = win. that must pull off standys like no one's business. when i did that with raceforms, they slid out on every carve

**goldfishofhate** · 10-10-2009 09:29 AM

Originally Posted by jaxxstatic

thats really funny, i just did this to my avenger last night, 'cept that it is setup as hybrid 215's and avalias

**jabobstro** · 10-10-2009 10:01 AM

Originally Posted by krow

Santoro's

whered you get em and what are the specs

**krow** · 10-10-2009 12:27 PM

Originally Posted by jabobstro

whered you get em and what are the specs

got them from "speedrasta", he's in Canada.

40* plates
170mm hangers
10mm axles
no spherical
flippable hangers

Super solid and stanle ride! 8)

and like the lowest trucks ive ever seen!!