your dh setup

**robert borek** · 05-20-2007 04:51 AM

maybe, they are fat vert pads, so maybe i should get some that arent so big.

**Basch** · 05-20-2007 05:02 AM

Or grow

But Pro Tec makes some good kneepads that aren't TO big

**robert borek** · 05-20-2007 05:09 AM

ok i will look into those. thanks for the help

**LaNdYaChTzDHrAcE** · 05-20-2007 10:05 AM

Landyachtz DH Race
Randal Downhills
97 mm Flyywheels(changing to 83)
6 ball bearings
2 Hard tracker stimulators

**worldridr768** · 05-20-2007 10:30 AM

Originally Posted by LaNdYaChTzDHrAcE

Landyachtz DH Race
Randal Downhills
97 mm Flyywheels(changing to 83)
6 ball bearings
2 Hard tracker stimulators

Doesn't that setup feel really unresponsive especially with the randal DH's? My friend hated his DH race because he set it up with Randal DH's. It wouldn't even turn! But if it works for you than that's great!

My setup is as follows:
Chicago Longboards Double-D
Crails. in front: 2 green Stims, in back 1 blue stim bottom, 1 blue superball top
Pink Gumballs
Biltins

**SgtSparkles** · 05-20-2007 05:02 PM

on the poll, is it about our current setups or your setup?

**karrot** · 05-20-2007 05:23 PM

Originally Posted by LaNdYaChTzDHrAcE

Landyachtz DH Race
Randal Downhills
97 mm Flyywheels(changing to 83)
6 ball bearings
2 Hard tracker stimulators

thats going to be the worst board in the world. especially with 83s

get grizzlys and 90s or r2s

**SgtSparkles** · 05-20-2007 05:36 PM

Originally Posted by karrot

thats going to be the worst board in the world. especially with 83s

get grizzlys and 90s or r2s

agree. the DH dewedging would need a 50 degree plate to even make it tollerable

**Fat Bastard** · 05-20-2007 05:46 PM

EVO
Randal DH's
Flat Washers
G-8 Kingpins
Khiro red barrel (bottom) Radikal Red (top) [front]
Kiro red barrel (bottom), Radikal Green (top) [back]
90mm flys (too big...waiting for BigZigs again)
100 pack Abec 7 bearings
spacers

**jshalvorsen** · 05-20-2007 05:48 PM

No-one checks this thread to read about stock setups w/o pics....

**Rustyfriend** · 05-20-2007 05:54 PM

in response on how to setup a dh race.......i have had a great amount of experience with them and IMO the best truck is that of a crail or randal (something with about a 50* plate)

**SgtSparkles** · 05-20-2007 06:11 PM

Originally Posted by jshalvorsen

No-one checks this thread to read about stock setups w/o pics....

pass.......

**Fat Bastard** · 05-20-2007 06:44 PM

Originally Posted by jshalvorsen

No-one checks this thread to read about stock setups w/o pics....

aimed at me or LaNdYaChTzDHrAcE?

**monkeyhead** · 05-23-2007 01:18 AM

I gotz teh carbonzz fibrezzszz. aLL i need know iz teh magoons!.11!!111!

**spikedfro10** · 05-23-2007 01:47 AM

those pictures brought a tear to my eye. beautiful setup man.

**melifont monk** · 05-23-2007 06:03 AM

Originally Posted by Rustyfriend

in response on how to setup a dh race.......i have had a great amount of experience with them and IMO the best truck is that of a crail or randal (something with about a 50* plate)

@ Rustyfriend:
i'm finally picking up my DHR tomorrow....yay....and my eventual setup will be:
1.R2 hangar/Randal Luge 60deg baseplate with a white JimZ bushing.
or
2.RDH (160mm) hangar/R2 50deg baseplate with a white JimZ bushing.
or
3.Holey 180 with a 55deg baseplate and a white JimZ bushing.

you've raced your DHR pretty thoroughly from what i can tell, which set up is the best for getting some turn out of my DHR without compromising its original design brief? i think its going to be number 2....

**Rustyfriend** · 05-23-2007 12:42 PM

instead of moxing trucks.....just go for a complete r2 180. the dh hanger sucks IMO because most bushings do not sit perfectly on them

**PMC** · 05-23-2007 01:37 PM

This is my most current setup, I got other setups but this one is my favorite, check it out

My new speedboard, check it out y'all

**HerBDerb** · 05-23-2007 02:24 PM

Originally Posted by karrot

thats going to be the worst board in the world. especially with 83s

get grizzlys and 90s or r2s

Why do you think it would suck with 83's?
I agree with it sucking with those trucks, though.

**green** · 05-23-2007 11:06 PM

I have a subsonic reflex, and I am ordering some grizzlys for it very soon. I am wondering what bushings I should get. I weigh about 160-170.

I am trying to upgrade trucks from tracker 215's. I am getting more and more into DH and am shaking as many wobbles as I can. I am positive the grizzlys are going to be better.

The search button told me so

.