your dh setup

**cuzz467** · 01-09-2010 09:16 PM

Originally Posted by speshlspeclsteak

shutup

lulz i didn't know Sasquatch skated

**JamieReis** · 01-09-2010 09:27 PM

Originally Posted by arizona_123

OW i hurt

Dayamn dude. Feel better that looks really gnarly.

**Gambit619** · 01-09-2010 10:35 PM

id say speshlsteaksauce wins this ouch battle

**zxczxc789** · 01-09-2010 10:40 PM

Originally Posted by speshlspeclsteak

shutup

suck it up butter cup lol

3.5 inch incision,16 staples,12 suechers to hold tendon to bone fragment that is being held on with 2 screws and had to pull down my kneecap. before surgery

**SeanML** · 01-09-2010 10:45 PM

http://www.silverfishlongboarding.co...hall-meat.html

**a_speck_of_dust** · 01-09-2010 11:19 PM

**thatoneblahguy** · 01-09-2010 11:25 PM

^^ 'ow ar' 'ey?

**snozzboarder55** · 01-09-2010 11:31 PM

Originally Posted by Smurf

I have, I didn't feel a difference and I had read they did have a change so I asked,
If you flip sabres what happens?

i think you answered your own question duder. look at the truck, what will happen if you flip it around and the axle is in the same location as before? nothing. if there is no change in the geometry of the truck when you flip it, then it's safe to say that it will perform the same as before.

important things to look for in "flipable" hangers - caster and rake

from my experience the only thing flipping a hanger does is take a once lively truck and gives it a fat dead spot and lowers the ride height slightly. if you like sacrificing fun for a few millimeters in height, then i guess flipping the hanger is right for you

**a_speck_of_dust** · 01-09-2010 11:47 PM

not the fastest setup, but definately fun as ####. busting mile long standies aint too shabby either

**phil7153** · 01-09-2010 11:58 PM

Originally Posted by arizona_123

OW i hurt

thats a nasty looking vagina, i mean knee

**DRC** · 01-10-2010 02:00 AM

38.5" Avenger
169s
Otangs

**snozzboarder55** · 01-10-2010 02:09 AM

Originally Posted by DRC

38.5" Avenger
169s
Otangs

stock bushings?

how are the 169s? twitchy as hell i bet... if so then its gotta be a good thing

**DRC** · 01-10-2010 02:23 AM

Originally Posted by snozzboarder55

stock bushings?

how are the 169s? twitchy as hell i bet... if so then its gotta be a good thing

Stock bushings for now. I'll get a longer KP and some more lively bushings in there eventually. I just decided to drill the indys old school and take them off my corchia for some fun.

Very twitchy. Very fun.

**bemmons1222** · 01-10-2010 02:29 AM

DRC, what's with the hellcat graphic? is that some sort of custom?

**snozzboarder55** · 01-10-2010 02:31 AM

Originally Posted by bemmons1222

DRC, what's with the hellcat graphic? is that some sort of custom?

it is now, i think it was a blem. and if im remembering the right thread he chopped it a skoatch and its a more "symmetrical" shape. it looks sick+1

**DRC** · 01-10-2010 02:40 AM

Originally Posted by bemmons1222

DRC, what's with the hellcat graphic? is that some sort of custom?

The previous owner ordered it custom with the hellcat graphic.

**bemmons1222** · 01-10-2010 05:34 AM

that's sweet, i always thought the 07-08 hellcat graphic was the best graphic that rayne has used

**gavmck** · 01-10-2010 05:49 AM

Originally Posted by snozzboarder55

i think you answered your own question duder. look at the truck, what will happen if you flip it around and the axle is in the same location as before? nothing. if there is no change in the geometry of the truck when you flip it, then it's safe to say that it will perform the same as before.

important things to look for in "flipable" hangers - caster and rake

from my experience the only thing flipping a hanger does is take a once lively truck and gives it a fat dead spot and lowers the ride height slightly. if you like sacrificing fun for a few millimeters in height, then i guess flipping the hanger is right for you

Sabres have a bunch of rake yo. It works the same as radnals, but the bushings seats are quite diferent so you get a different effect. I haven't tried it though, don't generally like flipped trucks.

**lfatboy** · 01-10-2010 06:14 AM

Originally Posted by gavmck

Sabres have a bunch of rake yo. It works the same as radnals, but the bushings seats are quite diferent so you get a different effect. I haven't tried it though, don't generally like flipped trucks.

Yep. I got confused for a sec and checked.

**DRC** · 01-10-2010 05:29 PM

I'm reaallllyy not used to Indys. I have them loose enough to bite if I push with my hands and they still dont seem turny enough at lower speeds.
White JimZ top on the bottom, stock orange top.