your dh setup

[Daniel M.]

My fullbag Dropthru
Randal 180s
50* Hangers
Abec 11 84a bushings top and bottom
77mm White Speedvents

dude, in n out is the friggin best. i havent had it in a year since i moved but that stuff is so good. the fries, and the shakes, and the burgers oh man

[boxcar182]

^
Amen to that brotha

[goldfishofhate]

specs and setup

L-39.5
W-9.75
W.B.-31
concave- .5 in

setup with-
- force c7s
- pink zig zags
- rock'n'rons rockets

[Acer87]

^^^
Very nice deck. Reminds me of the voodoo, which only means good things. Looks very versitile and really well built, I like it a lot.

Wish I had a mermaid on my board

[quuz]

Hi

Im getting a caften soon, and im wondering what's a good setup for it?

The setup I've got in mind is:

R2 180mm or R DH
Kryptronics 80mm or FLywheels 76mm 75a
Some random bearing.

What do you think?

[guivans]

Hi...i think that will work fine!
The experts here will tell you that randall trucks are not the mots precise ones...theyll probably tell you to go for forceC7, Bear smokeys or jimz...but i think that those randall will work fine!!!
The important is the geometry of the truck...all of these will work, they just do it in different ways!!!
But the best is to ride a friends board with different sets....thre youll see the one most fits you!And you can always tune you trucks with angled risers and bushings...so do your choice and dont stop trying new possibilities with dif risers and bushings!
Cheers...

But what do i know...?Im a noob here...listen to the guys..theyll give you great advises!
Cheers one more...

[jshalvorsen]

Hi

Im getting a caften soon, and im wondering what's a good setup for it?

The setup I've got in mind is:

R2 180mm or R DH
Kryptronics 80mm or FLywheels 76mm 75a
Some random bearing.

What do you think?

I'd go for the DH's. Too much angle on the front truck sucks IMO.

[boxcar182]

Get a combo of both, Randal DH plates with the 180 hangers.

[instinct.vs.intellect]

bt evo
smokeys
90 flys
ly bearings

-looking to upgrade to swiss bearings and 97s (payment sucks around here) any thoughts?

ohh yea and then a cattle plow for the front (like the ones u see on trains) and a small mortar for the back***just for safety precautions

[Jonny White]

Landy EVO
Bear Smokies
Biltins
Seismic Blast Waves in 75a

[Edison]

10mm biltins? I didn't think you could get smokies in 8mm.

[nbhcdownhill]

10mm biltins? I didn't think you could get smokies in 8mm.

http://www.milehighskates.com/catalo...evndlgbhan3963

[robert borek]

theyre grizzlies, he says he has smokies.

[Edison]

Ahh gotcha. I have 8mm grizzlies. I just knew Smokies didn't come in 8.

[nbhcdownhill]

Ahh gotcha. I have 8mm grizzlies. I just knew Smokies didn't come in 8.

oh snap!!!!!!!!!

[Jam]

Rayne Hellcat
JimZ speedhangers and baseplates (174mm X 10mm; 35 degrees; silver)
Sin System Ceramic bearings and Bear Steel bearings (combination of the two; 10mm)
Retro Zigzags (75mm; 80a; lime)

[~Nick~]

Jam, pictures

[skatardude10]

Rayne Hellcat
JimZ speedhangers and baseplates (174mm X 10mm; 35 degrees; silver)
Sin System Ceramic bearings and Bear Steel bearings (combination of the two; 10mm)
Retro Zigzags (75mm; 80a; lime)

Yeah, Jam... you should know that you can't post up a setup like that without pictures...

[charlietidd]

I'd imagine it would look something like this

[~Nick~]

Verai nice