CNC'd and Performance DH Trucks

[EFG]

[K-Rimes]

Maguns
---Angle: 45° (50° on the older runs)
---Bolt Pattern: Other
---Axle Size: 8mm
---Axle Width: 200mm
---Replaceable Axle: Yes
---Split Axle: Yes
---Axle Material: High Grade Steel, tempered
---Hanger Width: ???
---Hanger Material: Alloy
---Base Plate Material: Alloy
---Pivot: Standard
---Pivot Cup: Nylon Tubing
---Kingpin Hole: Standard
---Stock Bushings: Tracker Freestyle Bushings (hardish)
---Color ways: Gold
---Flip-able:
---Other: ???

JimZ hangers have either heat treated steel axles, or regular steel axles and have an old school bolt pattern.

Smokies have a replaceable axle, but it is very difficult to do without the proper tools. They also have a small, steel pivot that replaced the older aluminum one that was only on the first run of trucks and have also replaced the pivot spherical with a steel, rather than plastic bearing.

[karrot]

Kahalanis
---Angle: 45°
---Bolt Pattern: Old School/New School
---Axle Size: 8mm
---Axle Width: ???
---Replaceable Axle: ???
---Split Axle: no
---Axle Material: steel
---Hanger Width: 204mm
---Hanger Material: Alloy
---Base Plate Material: Alloy
---Pivot: Standard
---Pivot Cup: khiro
---Kingpin Hole: Standard
---Stock Bushings: Blue / Red Khiro Barrels
---Color ways: Silver
---Flip-able:
---Other: Finish is Easily Scratche

Randal Comp II / Luge
---Angle: 28*/35*/50°/60°
---Bolt Pattern: Old School
---Axle Size: 8mm
---Axle Width: ???
---Replaceable Axle: Yes
---Split Axle: No
---Axle Material: Hardened Steel Alloy
---Hanger Width: 170mm/205mm
---Hanger Material: Cast Aluminum
---Base Plate Material: Cast Aluminum
---Pivot: Standard
---Pivot Cup: Urethane
---Kingpin Hole: Standard
---Stock Bushings: Randal Black or Blue
---Color ways: Grey
---Flip-able:
---Other: Has Floating Axle, Luge Requires 8 Extra Bearings/ comp II requires 4

some stuff changed

[longskatehawaii]

some stuff changed

what about confederates? karrot don't you have some? add those

[karrot]

Confederates
---Angle:45*/35*/30*?
---Bolt Pattern:everything
---Axle Size: whatever you want
---Axle Width:
---Replaceable Axle: yes
---Split Axle: if you want it to be
---Axle Material: grade 10.9 steel
---Hanger Width:180/200
---Hanger Material: 6061 alluminm
---Base Plate Material:6061 alluminum
---Pivot: standard
---Pivot Cup: mylon tubing
---Kingpin Hole: 2
---Stock Bushings: none
---Color ways: clear coat
---Flip-able: you can flip them...
---Other: best dh trucks ever

[IvanTheTerrible]

JimZ are old school.

[Dash]

What were the first real available precision trucks?

Available meaning anyone could buy some...not some guys home made one offs.

[rp1313]

Radikal Dragons Talon
---Angle: 35°/45°/55°
---Bolt Pattern: Old School
---Axle Size: 8mm/(10mm coming soon)
---Axle Width: 171.7mm/179.05mm/184.4mm/193.29mm/197.1mm/209.8
---Replaceable Axle: Yes
---Split Axle: Yes
---Axle Material: Steel
---Hanger Width: 159mm
---Hanger Material: Aircraft Billet Aluminum
---Base Plate Material: Aircraft Billet Aluminum
---Pivot: Standard
---Pivot Cup: Urethane/Spherical
---Kingpin Hole: Standard/Spherical
---Stock Bushings: Radikal
---Color ways: Black/Red/Blue/Violet/Silver/Custom
---Flip-able: No need
---Other: ???

[K-Rimes]

I believe the Maguns were the first true precision truck available first. They were a little bit ahead of JimZ's. The Randal line (floaters) aren't CNC, so I wouldn't call them precision.

[Blub]

The JimZ Bushings in the smokies are the white and black different, if thats the case the big bushing list is wrong.

[savage2424]

so i got a hellcat for christmas, and i was wondering, can i drop smokies through?

[Dash]

I believe the Maguns were the first true precision truck available first. They were a little bit ahead of JimZ's. The Randal line (floaters) aren't CNC, so I wouldn't call them precision.

I would have guessed JimZ's. Didn't even think of Maguns.

I ordered JimZ's. Pretty stoked.

[IvanTheTerrible]

I would have guessed JimZ's. Didn't even think of Maguns.

I ordered JimZ's. Pretty stoked.

Be stoked, cornering will never be the same. Let alone your ride.

[SteveC]

The JimZ Bushings in the smokies are the white and black different, if thats the case the big bushing list is wrong.

JimZ have been produced 80a 82.5a and 85a.

I think all duro's have been poured in both colors too. so color in not necessarily an indicator of duro'.

If you read this Jim, white gray black.

[EFG]

As far as JimZ bushings I was going by his site: REPLACEMENT PARTS

Can anyone say if 204mm is the hanger width or the axle width for Kahalanis?

[EFG]

so i got a hellcat for christmas, and i was wondering, can i drop smokies through?

I was thinking of getting some Smokies for a Smoothcut. Can anyone give their opinion on dropping-thru Smokies? Are they best top mounted? Will there be clearance issues because of their low ride height?

[fiasco]

I was thinking of getting some Smokies for a Smoothcut. Can anyone give their opinion on dropping-thru Smokies? Are they best top mounted? Will there be clearance issues because of their low ride height?

smokies work fine on a hellcat

[worldridr768]

Kahalanis are split axle, but the axles are not in line with the kingpin.

[SgtSparkles]

jimz's also come in black, and when you flip them, it doesn't actualy do anything.
as of now, jimzbushings white is 82a and black is 85, acording to jim

[T.V.A.R.]

For the Record, Radikals are drilled old school and they do come with radikal bushings.

Do you guys think this thread should be a sticky? If yes, then it shall be so!