Help with Demonseed setup

[gofallonurhead]

yeah im trying to find them 79a vents. can only find 75a. they my fav wheel. only problem is the chattery drift. Ive never been near crails before so im gona stick with bears10/40-52.

[Gearfire]

I wouldn't bother with ceramics. I like the comfort of not being afraid to trash my bearings. They're a one of the few really cheap parts of boards that you can replace easily.

Crails ARE awesome... Great axles, and confidence inspiring. but yea, go ahead and stick with what you know you like. You can always try them later.

I might have to try out some Speedvents when I get a DH setup back.

[gabetar]

The steel 10mm landyatchz bearings and generic spacers.

[asagar123]

the venoms will fit fine...lots of ppl put barrel bushings on there bears. personly i hate bears, randals have a much better ridea

[flannelman]

i got lucky and found my 85mm purple speedvents here on the fish for $55 used. the little imperfection rubber form the mold had not even been worn off. i have them setup on my cindrich 3P with indy 215s. no bending so far, cross my fingers. had it like that for about two months. just pick up some nicer, but cheap bearings. MHS, Rush, Reds, that sort. i have never ridden bilitns, so i can chime in there.

[gofallonurhead]

the venoms will fit fine...lots of ppl put barrel bushings on there bears. personly i hate bears, randals have a much better ridea

Randals are nice, i got them on my other board.

[gofallonurhead]

waw luuucky $55? thats like 25 off. hmm. they dont seem to be on stoked and most of my normal sites. might have to just get off seismic or use dif wheel. they are 76 off seismic... it seems that this isnt gona be quite the price i had hoped, but w.e. Ill digg it outa some where... might take a while tho. $302 for demonseed bears 10/40 venom bushings lany 10mm steel bearings and spacers sceismic 85 vents 79a off seismic. without shipping... better start saving :0

[Gearfire]

waw luuucky $55? thats like 25 off. hmm. they dont seem to be on stoked and most of my normal sites. might have to just get off seismic or use dif wheel. they are 76 off seismic... it seems that this isnt gona be quite the price i had hoped, but w.e. Ill digg it outa some where... might take a while tho. $302 for demonseed bears 10/40 venom bushings lany 10mm steel bearings and spacers sceismic 85 vents 79a off seismic. without shipping... better start saving :0

That sounds mean... Makes me want one myself.

335.75 off of Socal w/o the Venoms for that setup.

[lmg]

52 randals stock red bushings 85mm speed vents 97a. this is my set up rides real well.

[gofallonurhead]

52 randals stock red bushings 85mm speed vents 97a. this is my set up rides real well.

how the hell does that ride well? the new randals turn like a mofo, i got them on my other deck, and i cant hold them steady past 38.

[jmasta]

demonseed + Bear 1052 front / 1040 rear + 90mm flys is my board of choice

[gofallonurhead]

does the different degree plates feel weird riding?

[Gearfire]

does the different degree plates feel weird riding?

People do it all the time. Look into Slalom.

[gofallonurhead]

iguess that just makes it more stable at the back and give the turning to the front

[jmasta]

does the different degree plates feel weird riding?

not at all. it feels awesome.

just gotta play around with yer bushings. anything stock is probably going to feel weird. you're going to need a harder duro for the back.. the lower angle BP increases leverage on the bushings, so the same duro bushing will "feel" softer

only thing about split baseplates is it's gonna feel weird if you ride switch

[lmg]

how the hell does that ride well? the new randals turn like a mofo, i got them on my other deck, and i cant hold them steady past 38.

I dont have a problem wen i d/h.I had it set up with bear tucks with a lot of bushing combos.Did not feal right at low speed or for pumping.

[gofallonurhead]

hm. ill probably stick with the same angle for both, don't wana get to experimentational.

[arubadub]

Guys, what do you thnk about the following setup? t's already on its way as specfied below, but just making sure in case this setup will not work out well so i can get other parts

Demonseed, Randall RII180, 42 degree base plates, Orangatang purple inHeats, bombsquad noseguard.

I'm thinking of drop through mounting, will this cause hangar bite because of the 42 baseplates? Anyone have 42 degree RII's mounted drop through on a dseed?

[TylerHill]

Guys, what do you thnk about the following setup? t's already on its way as specfied below, but just making sure in case this setup will not work out well so i can get other parts

Demonseed, Randall RII180, 42 degree base plates, Orangatang purple inHeats, bombsquad noseguard.

I'm thinking of drop through mounting, will this cause hangar bite because of the 42 baseplates? Anyone have 42 degree RII's mounted drop through on a dseed?

Not sure about the Randals and hanger bite. But drop-through with 75mm wheels is EXTREMELY low

[NC longboarder]

you could check out sabre trucks