forty2 - The answer

[SoloRider]

Which Fabric is best for sliding?

The pink camo NASCAR fabric, of course.

Could I get a rough estimate for a double drop board similar to the one on the first page?? I weigh 185 and was looking for something not too flexy, but with a measurable amount, if that helps.

Depends on construction, the cheapest appropriate build would be four plys with minimal glass, that would run $130. Three plys and a stringer glassed up for your weight would be $140. Adding carbon to the mix ups the price $25 per layer but three ply, partial stringer, and one layer of carbon would be fantastic. As a matter of fact you should ride #18 next time you're in town, just let me know when you'll be around.

[Jorelle]

Jorelle - Fabrics have been updated. There's no Disney at the place I've been buying, I'm sure it can be located on the internet. On the other hand, there is a lot of other stuff that made me laugh.

Oh thanks for looking though. If you do somehow come across some fabrics let me know how much extra I'll have to do a rain check about it since I need to use my dad's paypal . PS. Sorry I should've emailed you about this :P

[AdmiralButterCrust]

I hardly ever come into Seattle, like 1-2 times a year, not counting passing through. So, if I come into Seattle, it will probably be to test out a board or something. My getting a new board relies on a few different variables, so we'll see. I'm going to New Zealand in October, and would probably want to order it in time to have it before I go. I was thinking like 37-38", cause I don't need something as big as my FSM, but I still want enough foot space. So it would be $165 for three plies plus a stringer and a layer of CF??

[SoloRider]

So it would be $165 for three plies plus a stringer and a layer of CF??

That is correct. Where are you at anyway?

[AdmiralButterCrust]

Monroe, technically Snohomish, but really Monroe.

[SoloRider]

Monroe, technically Snohomish, but really Monroe.

Aw hell, Monroe's not that far away, I'm pretty busy next week but the week after I'd be happy to come to you.

[AdmiralButterCrust]

I suggest not wasting your time until I know for sure whether or not I'm getting a new board.

[AdmiralButterCrust]

Do you have an estimate on build time for 37"ish with the previously mentioned 3 plies, stringer, and CF?? I should know after tomorrow if I'm going to get one, because I'll know how much money I'll have. I'm going to go look for a Finnish Mosin Nagant tomorrow, failing that, a Russian one. They're cheap, as is ammo, but I'm not loaded.

[SoloRider]

Do you have an estimate on build time for 37"ish with the previously mentioned 3 plies, stringer, and CF?? I should know after tomorrow if I'm going to get one, because I'll know how much money I'll have. I'm going to go look for a Finnish Mosin Nagant tomorrow, failing that, a Russian one. They're cheap, as is ammo, but I'm not loaded.

Builds take about a week from start to finish and as of this moment I can start a deck for you no later than Thursday.

[AdmiralButterCrust]

Alright, thanks, I'll try and let you know as soon as possible.

[SoloRider]

Making room for more!

I am currently selling decks 3, 10, and 14. They are pictured in order from left to right. In the second photo numbers 3 and 14 look a little dull because they had just been sanded down to receive another coat of finish before heading out the door. Prices do not include shipping.





#3 - $75 This deck has been ridden more than anything else I've built. It's very stiff and sits nice and low. Easy to push and easy to slide, it's the one that really got me started selling. Build thread.

#10 - $60 A simple dancer, 51" x 9" with just a little kick at each end. Very strong with a bias ply layer and without glass it's quite springy while remaining pretty stiff. Build thread.

#14 - $120 The carbon/kevlar speedboard. It's been undergoing testing for the last 2 1/2 weeks at the capable hands of my favorite shop monkey, he goes by N88 here on the 'fish. A new build of similar construction will set you back $220. Deep flatcave makes it great for freeriding and it's far and away the stiffest thing I've built, in all respects. Build thread.

[luftywaffles]

My god $60 for a dancer?

Seriously someone, this is a ####### steal.

[Jorelle]

Dibs on the Dancer!

[SoloRider]

Dibs on the Dancer!

Done. Shoot me an email if you haven't already.

[guitarchick2182]

some sick boards. really digging the maple leaf one. possibility of shipping overseas?

[SoloRider]

some sick boards. really digging the maple leaf one. possibility of shipping overseas?

I'll ship anywhere if you're okay with UPS and you're willing to pay for it.

[guitarchick2182]

good to know! im still a little strapped for cash but i'll drop you an email when i got the cash together

[Jorelle]

PS, it'd be awesome of you stuck your new logo on the board

[SoloRider]

PS, it'd be awesome of you stuck your new logo on the board

I've got two stickers left from the first run of them, I'll drop one in the box when I mail the deck out later today. Payment received BTW.

[Jorelle]

I've got two stickers left from the first run of them, I'll drop one in the box when I mail the deck out later today. Payment received BTW.

I love you man.