Grennet truck inverted king pin

[GriffinSk8]

Now taking orders on the Grennett in 4.3 & 5.0. I am only doing the trucks in stock polished silver finish for now. The stock truck just comes with the inverted Dead Bolt king pin. Grind king insert nut flat washer machining work to the base plate. Custom paint. for $49+ tax per truck. Shipping is extra.

New inverted king pin, flat washer & insert nut.


Machining & Insert nut
The insert nut is pressed into the base plate so you can replace it if needed. The Grind King insert nut has longer threads than stock lock nuts.

Machined cut base plate.


The Dead Bolt is 2 1/4" long. These are hardened steel so they are just as strong as a grade 8 king pin. The Dead Bolt is from 1986 or 87 and is new old stock. The king pin is around 22 years old. This is when the older parts will work with the newer truck and parts to bring the truck back to the original truck if 1977. Please PM me or email me.

GriffinSK8

[GriffinSk8]

Fully machined truck will cost $78+ tax and shipping

Faced khiro race spacers adding DH speed ring to go on the out side of the nut

Faced hangers

Flat base plate

Miller bushing seat
Inverted king pin flat washer insert nut. Hour glassed bushing sanded and machined.
Custom paint, buffed hanger. Comes with hex tool.

[GriffinSk8]

]


I just talked to the person who started the Dead Bolts at ASR and found out that these are grade 8's.
GSK8

[GriffinSk8]

Polished pivot
Just added knurling to the insert nut and some extra's. Also adding more washers
to the truck. The cost has gone up $1.75 on all work on the trucks
GSK8

[GWE]

Grennet= grindable bennets?

[GriffinSk8]

Grennet= grindable bennets?

If you really wanted too! It's to make the king pin lower so no
more hang ups on the king pin. It want from a 3" king pin to a 2 1/4"
king pin. You could use them for any type of skate style. It is mostly for
LDP though.
GSK8

[GriffinSk8]

Just finished these 6.0 for a costumer. Faced the hanger 10mm and extra paint work.
One Delrin pivot cup and the inverted king pin work.

[GriffinSk8]

[CarlTheSmokingCrab]

these are incredible.

[GriffinSk8]

One more set that I just finished for a customer. Quite a lot of extra parts to go with the trucks.
GSK8

[Bevilacqua]

Nice job, Thane !
I have just started playing with my Vector 5.0 and IndeeSZ ....
A pleasure to ride and turn on a dime