Cindrich Boards Catalog

[Sandwich]

This is the Cindrich Longboards "Catalog Thread" and we will update this from time to time. If you have questions or comments, please visit us in the Cindrich Longboards "active thread".



Screamer
1/2 thick, 6061 t6 aluminum, CNC machined, brushed finish on top and bottom.
38.25 inch over all length, 9 inches wide, 33 inch wheel base, minimal to medium flex.

Deck only $225.00 plus shipping.
Usually can be shipped the same day as ordered.







Complete minus wheels, bearing, bushings (basically only the things that I make)
The package includes:
Screamer deck with a brushed finish, 200mm lowered hangers, 17-4 stainless steel axles, your choice of base plates (35, 40, 45, 50).
PM me for pricing on a complete

[Sandwich]

Randal Compatible billet aluminum 200mm lowered hangers $225.00 plus shipping.





Billet aluminum base plates of your choice between 35, 40, 45, and 50 degrees are $120.00 plus shipping.


Hangers and base plates, plus stainless steel hardware $320.00 plus shipping.



I have bushings to supply, but they are in the prototyping stage of things, they are 90a and 95a durometer.
I can supply pivot bushings for $2.00 a piece

[Sandwich]

Billet Stiffy
1/2 thick, 6061 t6 aluminum, CNC machined, brushed finish on top and bottom.
45.375 inch over all length, 9 inches wide, 33.25 inch wheel base, minimal flex.

Deck only $225.00 plus shipping.





Complete minus wheels, bearing, bushings (basically only the things that I make)
The package includes:
Screamer deck with a brushed finish, 200mm lowered hangers, 17-4 stainless steel axles, your choice of 35, 40, 45, 50 degree base plates.

PM me for pricing on a complete.

[Sandwich]

The three piece board with a polished underside, and brushed center piece is $320.00



This same board all in a brushed finish is $255.00 (sorry I don't have a picture)





And for the conservative dude, the three piece board with no finish to the aluminum $200.00

These prices are for the decks only!

These boards have a wheel base of about 34 inches, they are 9.25 wide at its widest, and 8.75 inches in the center. They have about 3/8 of an inch of concave, and about a 27 inch long riding platform.

For $50.00 more I have an option for a wider wing, making the board 10.375 inches at its widest, and 9.5 in the center, and about 1/2 inche of concave.

[Sandwich]

Here is my latest truck base design. Its a adjustable base, giving you a range from 50 degrees, to 25. It works with Randals, and the like.
I will offer this only here on the Fish.
Pricing for the adjustables are $90.00 for one, and $165.00 for a set.
It will come with a pivot bushing.
PM me for more information.

[Sandwich]

Prototype board

I call this the waterjet board, because most of it was cut out on our water jet machine.
If you want the craziest board in the world, this is for you.

If I remember right it has something like 68 pieces, that all bolt together
the deck its self weighs 8.5 pounds
its got a wheel base of about 35 inches
its 10 inches wide, and has 3/8 of an inch of concave

about 3/4 of an inch drop on the platform
Its incredibly ridged, and has basically zero flex
It needs no grip tape (not that there is a place for it anyway)


Pricing on one of these will be in the range of $250.00- $300.00 for the deck only.

This one in the photo is number one of this design, and may be the only one of its kind, as the next one I will likely change a few things.

[Sandwich]

The new Water Jet Board, also called the Terminator
This board is $285 for just the deck in a raw finish, and $320.00 for a brushed finish.
The updates from the prototype board are a more rounded, lighter nose and tail, lighter rails, and lighter spacers.

[Sandwich]

The current 3 Piece board features a rounded nose and tail, its now 10 inches wide at its widest, and 39.5 inches over all length.
Plain raw finish is $200.00
Brushed finish is $265.00
Polished finish is $320.00
The lightweight "race" option (my avatar picture) is $275.00 plain, and $320.00 brushed
Powder coating is an option, prices are $275.00-$325.00 depending on paint color and availability.


This is and example of a raw finish on the top and a brushed finish on the bottom, these boards both have square nose and tails, and I don't make that style center piece any more.

[Sandwich]

In the truck department, there has been a lot of changes.


Gen 1 hangers have been discontinued.


Gen 2 hangers replaced Gen 1's, and are basically the same. They only come in 200mm's $185.00 for the set of hangers
The Gen 2 hanger is the one on the left of the picture above.


Gen 3 hangers are basically the same as Gen 2's except there appearance is different from a visual standpoint. Also Gen 3's come in 200, 180, 140, and 100 widths, with more widths to come. $185.00 for the set of hangers.



Gen 4 hangers are basically a Gen 3 hanger, but rather than having inline axles as the Gen 2 and 3's, the axles are off plain of the king pin by 1/2 of an inch. Gen 4's also come in 200, 180, 140, and 100mm widths, with more to come in the future. $185.00 for the set of hangers.


240 Monsters. These are kind of a combination of the Gen 2's and the Gen 4's with the exception of them being as wide as they are. Great for casual cruising. $200.00 for the set of hangers.



Base plates for the Generation hangers are as follows, 35, 40, 45, and 50 degree regular plates. 40, 45, and 50 Drop Up plates. $45.00 per plate for the regulars, and $50.00 per plate for the Drop Ups.
The adjustable base plate has been discontinued for a time, but I will be revising them in the future and releasing a new and improved adjustable.


My axles are made from 17-4ph stainless steel. I only make 8mm axles for the time being.


I have a line of replacement base plates for Independent trucks, as well as Bennetts.


For the Indy's I have base plates with king pin angles of 0, 5, 10, and 15 degree's. $40.00 per plate


For Bennetts I have base plates with king pin angles of 15, 20, and 25 degree's. $45.00 per plate



Lastly I have a run of Traditional King Pin hangers. They come in widths of 180, 190, and 200mm's They fit Independent base plates, and Cindy base plates (my base plate mentioned above). Hangers are $190.00 for the set.

[Sandwich]

The silverfish board
Price range $250.00-$350.00



The board in the top of this picture was a limited run of only four boards. I may make a few more, but don't count on it.