ⓂⓈⓉ MudSlide Gloves+Pucks: available 3/24/09!

[MJKam11]

I will be ordering some full finger mechanix with mudstones full finger when I learn the prices. (If its too much i'll order some gloves and something else, w/e i'll see).

[Sneakerholic]

I would love to order a set of mudstones. Will you ship to Portugal?

[jmasta]

Originally Posted by chandler95

Sweet...might have to pick up a set with the gloves because my loadeds are dying. Why is the center of the mudslides a lighter color?

The white circle is characteristic of the DelrinAF material. It runs through the entire length of the rod

Originally Posted by FL_RIDER_93

WTF! jamasta is your walmart filled with ninjas that you have to defeat to get to the battery section? i'm really looking froward to these gloves and pucks, and nothing against you as a skater or a person but your lack of punctuality doesn't help your image as a entrepreneur.

Sorry for the delays. I did not want to release these until I thought they were perfect.

It took a long time to get the pucks to come out square, level, and with even bevels.
It also took many trials to get the logos to come out clean

I'd much rather release them a few days late, then push a poor-quality product

[FL_RIDER_93]

whats performance difference will delrinaf bring thats different from black delrin?

[jmasta]

Originally Posted by FL_RIDER_93

whats performance difference will delrinaf bring thats different from black delrin?

BlackTops: Delrin is an amazing material. Slides super fast, and if you rotate your pucks, they'll last you months of hard riding. If you're on a budget, these are the fastest pucks you can get for your money. They will not be much more than the GreenHorns. I absolutely love tech sliding on Delrin; they're great for those smooth slidehills (aka, blacktops)

MudStones: DelrinAF is the ultimate slide puck material. While it's quite a bit more expensive than Delrin, the added teflon greatly increases its wear properties; they should easily last 2-3 times longer than standard Delrin. Also, it slides even faster than Delrin.... making MudStones the fastest pucks on the market! These may very well be the last pucks you buy

GreenHorns: UHMW-PE is most common slide puck material for a reason. It has great material properties, considering how cheap it is. These pucks will last longer than the BlackTops, but slide slower. This, however, is not always a bad thing.... these are great pucks for speedboarding, since they allow you to scrub off more speed in the corners. They're also good for those new to sliding, since they're cheaper and "more controlled" (aka slower)

[Chaunce]

This will sound stupid..but how loud are these pucks? I've got a drawer full of corian samples that I go through, but when I go out at night, I'd prefer something quieter.

[jmasta]

Originally Posted by Chaunce

This will sound stupid..but how loud are these pucks? I've got a drawer full of corian samples that I go through, but when I go out at night, I'd prefer something quieter.

Well I can't hear them over my screeching, flatspotted wheels

[dirtdynamics]

Originally Posted by Chaunce

This will sound stupid..but how loud are these pucks? I've got a drawer full of corian samples that I go through, but when I go out at night, I'd prefer something quieter.

you mean you want some shhhhhhhhhhhhhhhhhhhhhhhhh pucks

[luftywaffles]

Finally!!!! I Love It Awesome Now All We Need Is Prices Yayayay IＣＡＮＴwait!!!!

ｔｈｅｙ　ｌｏｏｋ　ａｍａｚｉｎｇ　ｂｙ　ｔｈｅ　ｗａｙ！！

[Rouleau]

I want some asap. Prices? Where/when can we get these hotties?

Also I have Q. So I'm gunna get a full set with gloves. Idk which ones yet. But let's say I wanna go do some downhill. Can I just take off the thumb and finger picks so I can grab rail, and then just put them back on? Will that make the Velcro less-strong? Thanks

[jmasta]

Originally Posted by Rouleau

I want some asap. Prices? Where/when can we get these hotties?

Also I have Q. So I'm gunna get a full set with gloves. Idk which ones yet. But let's say I wanna go do some downhill. Can I just take off the thumb and finger picks so I can grab rail, and then just put them back on? Will that make the Velcro less-strong? Thanks

All my pucks come with industrial velrco attached.

You can certainly take the fingers/thumbs off to make it easier to grab rail. The velcro on the fingers will reinforce the gloves and make them last a bit longer.... However, as velcro is worn abrasively, it starts losing it grip. So you risk your finger pucks falling off easier later down the road.

You can actually grab rail really well with full pucks on. I have designed them to be the optimal size and shape to allow the best dexterity, yet offer good protection. I, personally, have no problem grabbing rail with these gloves




Oh yeah,. I'm still figuring out the prices. I'll post them by tomorrow..... hopefully I can get my website done tonight

[jmasta]

Originally Posted by Sneakerholic

I would love to order a set of mudstones. Will you ship to Portugal?

Yes, I will ship to anywhere in the world.

I'll have to check on international shipping prices for you. I'll just charge you what it costs.... no need to jack up the prices on ya

[luftywaffles]

ｊｕｓｔ　ａ　ｒａｎｄｏｍ　ｑｕｅｓｔｉｏｎ：　ｔｈｅ　ｌｏｇｏｓ　ｏｎ　ｔｈｅ　ｇｌｏｖｅｓ．．． ｙｏｕ　ｐａｉｎｔｅｄ　ｔｈｅｍ　ｏｎ　ｒｉｇｈｔ？　

ｌｏｌ　ｉ　ｌｉｋｅ　ｔｈｅ　＂ｍｕｄｄｙ　ｏｒ　ｃｌｅａｎ＂　ｏｐｔｉｏｎ　ｌｏｌ　ｖｅｒｙ　ｃｒ ｅａｔｉｖｅ．．．

[kjc6]

Nice looking pucks, jmasta.

And the fingerless gloves look awesome, as well.

[jmasta]

Originally Posted by kjc6

Nice looking pucks, jmasta.

And the fingerless gloves look awesome, as well.

Haha thanks.... I never thought I would like fingerless gloves... then I made a pair and was like, "Wow these are actually pretty cool". They're really comfortable and light weight\

I don't think I'd use them for tech sliding... but they'd be great for freeriding around town/campus

[Kataplexy]

These look really nice, I'm eagerly awaiting the prices

[kjc6]

Originally Posted by jmasta

Haha thanks.... I never thought I would like fingerless gloves... then I made a pair and was like, "Wow these are actually pretty cool". They're really comfortable and light weight

I don't think I'd use them for tech sliding... but they'd be great for freeriding around town/campus

Hehe. I made a pair out of Harbinger weightlifting gloves and I almost never use fullfingers anymore. Fingerless are just so damn comfy and convenient!

[AFTT]

Waiting for a place to buy from. I lost my last pair of gloves, and have multiple holes in my other pair.

[anatharc]

price on this stuff? or a website plz?

[MJKam11]

Ahh I am dying I want these really badly!!!! *claps like an idiot due to desperation*.