Azonic AZX and Charly No limit.

[LFPLongboarder]

Could someone post pictures of both of those helmets like side to side? I know the AZX is discontinued but i still would like a picture of them side by sidee.

[assumeivan]

[LFPLongboarder]

Thanks, But i meant like next to each other in the same picture. To compare specs.

[karrot]

lol its not gonna look much different than what ivan just posted

[rivers]

This might be helpfull..




Very similar. The AZX is slightly shorter wider and heavier than the charly, and is WAY stronger. Very safe feeling helmet, and has all the saftey certificates and stuff. With the visor taped down the AZX is very quiet inside, unlike the Charly which can get noisy at high speeds. The visibilty of the AZX is almost identical to the Charly aside from a slight loss of vision when looking straight down at the chin.

Which one is more aero? Im no expert at that stuff, both helmets are very clean aero shapes, but would I would guess the Charly is slightly more aero, as it is longer and thinner, which is good for aero. Which is safer? The AZX without a doubt.

[neuros]

That looks like a quite well-loved Charly

[Animal127]

so the faceshield is interchangeable with the azx?? What about the bell drop?

[karrot]

http://cgi.ebay.com/ebaymotors/ws/eB...6196&viewitem=

azx on the cheap
ends tommorow

[DPerjar]

I was slightly worried when you posted the link Karrot, because I had my eye on it. I managed to score it a minute ago for 31. Going to be a project for me. First paint then work out the visor issue.

[karrot]

I was slightly worried when you posted the link Karrot, because I had my eye on it. I managed to score it a minute ago for 31. Going to be a project for me. First paint then work out the visor issue.

right on
i was gonna out bid you but i dont really need it

[Snow]

I was slightly worried when you posted the link Karrot, because I had my eye on it. I managed to score it a minute ago for 31. Going to be a project for me. First paint then work out the visor issue.

Watch out when painting a helmet. I've read that it could mess up the structural integrity of the foam I believe.

[DPerjar]

right on
i was gonna out bid you but i dont really need it

Haha. Thanks. I hadn't bid on it til like 20 seconds before it ended. I was scared it was going to get jacked.

Snow, I'm aware of that, I plan on taking all the necessary measurements. The foam in it is already old as hell, so we'll see.

[DPerjar]

Now I need to decide what face shield to use on it. I could go with a Charly (Expensive) Or a cheaper one from another helmet, like these two:



Or



Do either of those seem like good fits?

[Doors]

Falling on your chin hurts

[DPerjar]

. . . Seriously...

If you're going to bump your post count please read the entire thread at least. Hell at least read my entire post.

[arvin_1354]

how do you wash the charly no limits? cant take the paddings off???