Do you have a red-headed second cousin who is a serious MILF? You know, the cousin that is still a little to close to think of bagging without having an exit plan from the family?
That's like Sniff's Cherry.
Well Gary, Zack, meet the Cherry's brunette half sister from the parent outside of the family.
At 8.75" X 32", she is curvaceous yet comes in ~ 1lb 10oz.
She is produced using the rapid multilayer composite construction method I've been working on to reduce time to delivery.
The layup is a sandwiched carbon/wood/foam StringRail layup.
The edge rails are .250" (two layers @ .125" sandwiching carbon) with an additional .125" maple/carbon (two layers maple @ .063" sandwiching carbon) bottom stringer.
The topside (and optionally the core layer depending on the desired flex) features 2 X carbon twill layed up on the 45's for torsional rigidity while the rest of the carbon layers are on the 0/90 orientations to round out the compass points.
The slots will get milled in the next day or so when the plates are wrapped - those have been upgraded as well.
The standard plate is now fly cut on the base plate mounting face to produce a flat to mount the truck while maintaining the articulation that matches the deck.
And while Sniff is happy to keep on rockin his second cousin MILF, you may both rest easy knowing that relations with these little honeys will not force you to leave town.
By the way, as soon as these three - yes, there are three - go out, there'll be a little pause while the Bucktard wedge kits get built.
Gary, kick wedges within a month.
Later,
Brian
__________________
If you're not on track, you're not on board -
it's all Chi+Spiegel from here on so you better start looking for somebody else to blame - loosers
Be a happy warrior and die with a smile on your face cause otherwise you dead anyway.
Location: buying used stuff off of SF, so i can look "gnar" with my pre-thrashed gear
Age: 20
Posts: 4,258
Re: The Cherry's Siblings...
4 bars of rep! good job
and nice board too!
__________________
Quote:
Originally Posted by DELETED
:o Hey guys can you help me with this?
:neutral: Well you see that's a pretty common question, you can find they answer if you put some effort into it.
:o No, that was useless to me just tell me so I don't have to put that much effort into it.
:rolleyes: Yeah yeah, screw you too pal. Teach a man to fish...
:mad: You're assholes!
If there is any interest, kits for pressing these as DIY are coming.
__________________
If you're not on track, you're not on board -
it's all Chi+Spiegel from here on so you better start looking for somebody else to blame - loosers
Be a happy warrior and die with a smile on your face cause otherwise you dead anyway.
The Cherry's Siblings...
Linear Mode
