best place to buy UHMW?

**ConnorH** · 12-16-2007 05:21 PM

so for me i have been using corian which works ok but its kind of a nuisance to keep having to go to home depot and take corian. also it doesn't slide the smoothest as cutting board. But cutting board i dont have an blow torch to melt it and i dont have any around. Back on subject ive noticed that most longboard companys use UMHW to put on their slide gloves. I dont wanna spend 20 bucks on like one puck with a logo on it so where is the best website that you can buy UMHW from. I am maybe going to see if my other friends would wanna chip in and get some in bulk.

Also what is the best thickness to use for UMHW slide pucks?

**Slim** · 12-16-2007 06:00 PM

I buy plastics for pucks at my local Tap Plastic shop. If you don't have one near to you, check the website: http://tapplastics.com/

**Slim** · 12-16-2007 06:02 PM

As for thickness, I'd say something close to 1/2" is common. So either 3/8 or 1/2 or 5/8 or something like that. Any thicker and it gets heavy. Though you could use a thicker one on just the palm if you really do a lot of sliding and find that the thinner ones wear out to quickly for you. (but if you're making your own it'll be so cheap that I don't think you'll mind putting on a new one now and then).

**spikedfro10** · 12-16-2007 06:08 PM

get delrin, its sooo much smoother than uhmw. hit up a nearby plastics shop and see if they can hook you up with some scraps, thats how we do it.

**ConnorH** · 12-16-2007 07:27 PM

Originally Posted by spikedfro10

get delrin, its sooo much smoother than uhmw. hit up a nearby plastics shop and see if they can hook you up with some scraps, thats how we do it.

ya delrin looks nice but i hear it wears down faster

**roflsore** · 12-16-2007 07:32 PM

corian > plastic

**RBriggs85** · 12-18-2007 05:24 PM

McMaster.Com

**VulgarDisplayCFH** · 12-18-2007 05:27 PM

Originally Posted by roflsore

corian > plastic

Heavy .

**Meltzy** · 12-20-2007 03:33 AM

keep with the corian man, durable and slides like iiiccceee!

**RBriggs85** · 12-20-2007 10:39 AM

Originally Posted by Meltzy

keep with the corian man, durable and slides like iiiccceee!

Corian has about 1/3 of the durability that UHMW does..

It's all the same though I guess.
As long as your going fast that is..

**assumeivan** · 12-20-2007 11:55 AM

For UHMW, is there a thickness that would be thin enough to bend without using a blow torch? I'm looking to attach a few pieces under my camera case, but I need a thinner piece that would bend around the bottom. I was thinking maybe .125 or .250?